Wire Wiring Harness

Classic Complete Wiring Harness Update Kit. The Classic Update Series gives you the most complete kits on the market to Make Wiring THAT Easy. They are designed for specific year, make, and model configurations. The 19791980 Pontiac Firebird Classic Update Kit is no exception. The kit boasts 13 features making it the most complete system of its type in the industry including: A replacement headlight switch with internal 30amp circuit breaker, retention collar nut, adjustable length shaft, and custom knob. Standard turn signal and hazard flashers are mounted on fuse panel. A new horn relay is mounted on the main dash harness. Fuse box designed to fit in original location with no modifications. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all aftermarket accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies – an American Autowire exclusive feature Steering column connectors can plug directly into many aftermarket steering columns or stock 1977-80 GM columns that use stock GM turn signal switches. Complete factory heater harness assembly included. Separate under dash courtesy lamps for use along with your original dome/interior lighting. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. Original terminals and PC board connector (another American Autowire exclusive) are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, VDO and others. Rear body harness assembly plugs into the main harness in the stock location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes complete backup light leads with correct lamp sockets, complete stop and tail light leads with correct lamp sockets, complete turn signal leads with correct lamp sockets, complete rear side marker leads with correct long focal length molded lamp sockets, complete license plate lead connection to plug into your lamps, and fuel tank sender wire with trunk grommet and tank connection. GM bulkhead connectors for the engine and front light wiring are included (another American Autowire exclusive) and allow for easy installation with original or custom routing. Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra-long leads that can be routed for stock or optional appearances. All headlight connectors and terminals, parking and directional light leads and lamp sockets, and side marker leads and lamp sockets are provided along with a switched trigger wire for an electric fan relay (usually recommended with AC). All the various connectors and terminals for your wiper/washer system are provided. Per California Law (Prop 65) we are required to put the following warning on all our listings. Please verify that the description contains your specific vehicle. While eBays compatibility system does a good job, it sometimes lists sub-models that may or may not be compatible with the part being offered. We have a 70,000 square ware house; so chances are we do have your item in stock and ready to go. Sorry for any inconvenience. This excludes special order items and electrical items. Powered by SixBit’s eCommerce Solution. The item “1979-80 Pontiac Firebird Classic Update Wiring Harness Complete Kit 510689″ is in sale since Friday, June 2, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “thepartsplaceinc” and is located in DeKalb, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.

• Brand: American Autowire
• Manufacturer Part Number: 510689
• Other Part Number: WH1237F
• Quantity: 1

FOR PREMIUM AMPLIFIED FACTORY SYSTEM RADIO REPLACEMENT. DOUBLE-DIN and SINGLE-DIN PROVISIONS INCLUDED (COMBO INCLUDES : DASH KIT and AMP TURN-ON INTERFACE). This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. Some “SELLERS” say they will send you what is “available” at the time. They substitute cheap, poor quality generic products for the Metra Harnesses and Antenna Adapters (when applicable). Wouldn’t you rather get what you paid for? Don’t fall for cheap substitutions that come in plain plastic bags, don’t fit right and should cost a lot less. This Complete Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). DASH KIT and AMP TURN-ON INTERFACE. FACTORY ROCKFORD FOSGATE SYSTEM. DIN Radio Provision with Pocket. ISO Mount Radio Provision with Pocket. Double DIN Radio Provision. Stacked ISO Mount Units Provision. Retains Factory Air Vents, Hazard Button, & Passenger Airbag Light in Original Locations. Quick-Release, Snap-In ISO Mount System with Custom Trim Ring. Removable Oversized Storage Pocket with Built-In Radio Supports. Contoured, Textured and Painted to Match the Factory Dash. Heavy Duty ABS Plastic Construction. METRA MITSUBISHI DATA BUS INTERFACE. Designed to be used in vehicles that have the Rockford Fosgate audio system. The MITO-02 supplies a digital signal to turn the amplifier on. When installing a radio that has navigation built-in, the MITO-02 can supply VSS (Vehicle Speed Sense), Parking Brake, and Reverse. Reverse is not available on manual transmission vehicles. If vehicle is equipped with Bluetooth, that feature will be retained. (1) Metra Radio Housing 99-7011. (1) ISO Trim Plate. (2) Double DIN Brackets. (1) Double DIN Trim Plate. (1) Removable Storage Pocket. (1) Metra Amp Turn-On Interface. (1) 14-Pin Harness with RCA’s. (1) Vehicle Side Harness. Metra Amp Turn-On Interface. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “99-7011 Car Stereo Double-Din Radio Install Dash Kit for Lancer with Fosgate Amp” is in sale since Wednesday, June 13, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam.

• Brand: Metra 99-7011 CD Player DVD D-Din Adapter Bezel
• Manufacturer Part Number: Metra 99-7011 + Axxess MITO-02
• Placement on Vehicle: Front
• Surface Finish: FACTORY MATCHED
• Warranty: Yes
• Product Type: AFTERMARKET RADIO STEREO INSTALLATION KIT
• SUPPORTED RADIO SIZES: DOUBLE DIN, 2 ISO DIN RADIOS, SINGLE DIN W/POCKET
• INTERNATIONAL BUYERS (OUTSIDE U.S.A.): PRODUCTS SOLD ARE FOR VEHICLES IN THE U.S.A. ONLY!
• Interchange Part Number: MI3019B 2-Din Mounting Trim Plate & Wiring Harness
• Other Part Number: MIT-K894 Single-Din Installation Panel & Plugs
• Country/Region of Manufacture: United States