Wire Wiring Harness

LS Swap Wire Harness Fuse Block with Fans Stand alone Wiring Harness OBD2 Port

Posted on by
LS Swap Wire Harness Fuse Block with Fans Stand alone Wiring Harness OBD2 Port
LS Swap Wire Harness Fuse Block with Fans Stand alone Wiring Harness OBD2 Port
LS Swap Wire Harness Fuse Block with Fans Stand alone Wiring Harness OBD2 Port

LS Swap Wire Harness Fuse Block with Fans Stand alone Wiring Harness OBD2 Port
LS Swap DIY Harness Rework Fuse Block kit for LS Standalone Harness with Fans. Including, but not limited to LT1, LS1, LM7, LR4, LQ9, LQ4, 4.8, 5.3, 5.7, 6.0, 6.2, and 7.0 Engines. Are you the Do it yourself kinda gear head? On a tight budget? I have a complete engine management fuse and relay panel ready to go for you with installation instructions! This has enough circuits to power a 4.8, 5.3 or 6.0 all terminals are production crimped to meet Delphi standards for crimp height and width! BP Automotive only uses OEM Quality TXL Wire! As you can see it comes color coded and with a general guide for installation! The covers are also labeled on the inside with a legend of the location of each relay and fuse. 12 Way Fuse Block with 6 Fuses. All of our DIY Kits are made with color coded TXL wire to meet or exceed OEM standards! We only use OEM Delphi, Kostal, Bosch, Molex, and Yazaki connectors, terminals, and seals on our standalone harnesses. This ensures a perfect solderless crimp, just like what you would see in a GM harness. Our DIY Kits come with instructions, but this item is only meant for someone who has experience with automotive fuel injection systems and automotive wiring. We do offer tech support for this item, however, with the nature of the item being a DIY kit, BP Automotive can only offer limited tech support for this item. Removal of VATS and other non-needed items will still need to be removed from the PCM or ECM for your engine to run. The item “LS Swap Wire Harness Fuse Block with Fans Stand alone Wiring Harness OBD2 Port” is in sale since Tuesday, November 13, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “michiganmotorsports” and is located in Niles, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Bahamas, Viet nam.
  • Brand: Michigan Motorsports
  • Manufacturer Part Number: B4100

LS Swap Wire Harness Fuse Block with Fans Stand alone Wiring Harness OBD2 Port

Incoming search terms:

  • ls stand alone fuse block
Tagged: , , , , , , , , , , .

LS Series Stand Alone Wiring Harness With Blue Green OEM ECU

Posted on by
LS Series Stand Alone Wiring Harness With Blue Green OEM ECU
LS Series Stand Alone Wiring Harness With Blue Green OEM ECU
LS Series Stand Alone Wiring Harness With Blue Green OEM ECU
LS Series Stand Alone Wiring Harness With Blue Green OEM ECU

LS Series Stand Alone Wiring Harness With Blue Green OEM ECU
LS Series Stand Alone Wiring Harness With Blue Green OEM ECU. All CBM Motorsports harnesses are completely plug and play with switched power, constant power and ground connections required. Harnesses are professionally constructed from brand new GM Delphi connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. This is not a modified OEM harness. Every clip, connector and pin is brand new. All blunt cut wires are clearly labeled for easy installation. We use genuine weather pack Delphi plugs for every connection (not knock off China plugs). This is a show quality harness and uses all expandable sleeving, not cheap plastic split loom. All wires are correct AWG and have shrink wrap at each end. Every harness comes with a four foot lead to mount the computer under a seat, inside the passenger compartment, on a firewall, etc. The package comes with a water tight relay pack and fuse holder. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Complete Engine and Transmission Wiring Harness including. All engine and transmission sensor connectors. Switched Power Ignition Relay. If available in our tune inventory, we are happy to place a baseline tune in the computer at no additional cost. We are CBM Motorsports based out of Colton, CA. We specialize in high performance engines for off road vehicles, hot rods, classic cars, drag cars, rock crawlers, boats, and custom vehicles. We carry many specialty parts for the Chevrolet LS series engines, Cadillac Northstar and Shortstar, Chevrolet Ecotec, and finally the classic Chevrolet small and big block. If you are looking for more power out of your current set up or want to build an engine from the ground up look no further. We have a GM world-class certified technician with nearly 20 years of experience and an in house dynamometer. We offer tuning services, engine repair, engine swaps, and custom fabrication. We also have ASE certified technicians and a MECP certified professional. If you are local, please come visit our showroom and see what one of the largest engine suppliers in the nation has to offer. If you have any questions, comments, or concerns about a product we sell or services we provide, please send us a message. We leave feedback automatically once the item has been paid for. We consider our feedback VERY IMPORTANT. Let us know if there was a mistake made during your order and we will do our best to resolve the issue. Send us a message. We make sure every customer is 100% satisfied no matter the size of the order. Please understand we are a business and appreciate every one of our customers. Custom-made parts may take longer. Please understand Saturday, Sunday & Holidays. If you would like your package. Please let us know and we would be happy to add it to the quote. UPS will not deliver to P. If you are not satisfied with your part or accessory for any reason, you may return it within 30 days of receipt of your order. You may return products that. Do not have missing parts. Are in their original packaging. Are not damaged, previously installed, or used. Were not custom built, painted, or modified for your application. Track Page Views With. Auctiva’s FREE Counter. The item “LS Series Stand Alone Wiring Harness With Blue Green OEM ECU” is in sale since Friday, September 13, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “custombuiltmotors” and is located in Colton, California. This item can be shipped worldwide.
  • Manufacturer Part Number: CBM-LSBGHECU
  • Warranty: Yes
  • Brand: CBM Motorsports
  • Country of Manufacture: United States
  • Part Brand: CBM Motorsports

LS Series Stand Alone Wiring Harness With Blue Green OEM ECU
Tagged: , , , , , , .

How To Lsx 5 3 6 0 Ls1 Stand Alone 3 Wire Harness Completed

Posted on by
Tagged: , , , , .

Drive By Wire Vortec T56 Non Electric Stand Alone LS Swap Harness

Posted on by
Drive By Wire Vortec T56 Non Electric Stand Alone LS Swap Harness

Drive By Wire Vortec T56 Non Electric Stand Alone LS Swap Harness
Drive By Wire Vortec T56 Non Electric Stand Alone LS Swap Harness. RPO Codes LM7, LR4, LQ4, and LQ9 with a Drive by Wire (Electronic) Throttle Body, Multec Injectors, and a T56 or Non-Electric Transmission. All of our vortec standalone harnesses are made with GM color coded TXL wire to meet or exceed OEM standards! All circuits that are ran by heat like the O2 sensor circuits are covered with 1200 Fiberglass Braid. We only use OEM Delphi, Kostal, Bosch, Molex, and Yazaki connectors, terminals, and seals on our standalone harnesses. All connectors that have Connector Position Assurance Lock on a factory harness have them on our harnesses also. Our harnesses also include a sliding, snug fitting Delphi Grommet that can be positioned on the main harness line to seal your firewall. Our LS swap standalone harnesses are 5 foot long from the rear of the intake. This enables you to mount the PCM and Fuse Block in the passenger compartment! This harness is for pre-emissions vehicles or for off road use only. This harness does not have provisions for EGR, AIR, EVAP, or Rear O2 Sensors. We can add these for an additional cost, however in most cases they are not needed. IF EMISSIONS ARE NEEDED YOUR HARNESS WILL INCUR A LEAD TIME. Our Vortec swap harnesses also require the removal of the VATS and emissions systems from the PCM. BP Automotive offers this service with a discount when purchasing a new harness. The item “Drive By Wire Vortec T56 Non Electric Stand Alone LS Swap Harness” is in sale since Thursday, February 23, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “bpautomotivellc” and is located in Columbia, Kentucky. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: BP Automotive
  • Manufacturer Part Number: H354
  • Warranty: Lifetime
  • Country/Region of Manufacture: United States
  • Mass Air Flow Connector: 5 Wire Vortec/LS6/LS2
  • OE Spec or Performance/Custom: Performance/Custom

Drive By Wire Vortec T56 Non Electric Stand Alone LS Swap Harness
Tagged: , , , , , , , .

Speedway 2005-2006 Chevy GM LS2 V8 Swap Stand Alone Engine Wiring Harness

Posted on by
Speedway 2005-2006 Chevy GM LS2 V8 Swap Stand Alone Engine Wiring Harness

Speedway 2005-2006 Chevy GM LS2 V8 Swap Stand Alone Engine Wiring Harness
America’s Oldest Speed Shop®. Works with 24x crank reluctor from GTO, electronic throttle body, and E40 ECM. Electronic pedal assembly must be from a GTO. Works with non-electronic transmissions only that do not require a transmission control module. Common aftermarket fuel pump and fan relays are included. These harnesses feature all of the connection points necessary to run the engine and transmission if applicable. The emission equipment has been eliminated and only the needed connections to run the engine and transmission are incorporated. ECM programming will need to be done to remove all of the unneeded trouble codes that may be active from the stock application. Programming will need to be done to remove VATS (vehicle anti-theft system) programming, otherwise the engine will not run. These wiring harnesses do not include any type of VATS module to defeat the theft system. Standard length harnesses are 54 from the back of the engine to the PCM connectors. Extended length harrnesses add an extra 4 ft. To remote-mount the PCM in your glovebox or underneath your dash. Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible. Made from premium grade GXL jacketed automotive wire. Most wiring is larger gauge than stock application for durability. No splices to reduce points of failure. All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping. Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification. All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks. Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation. Diagnostic connector or OBD2 port for connection to scanners and tuning tools. Made in the USA. Related Items / Suggested Parts. Speedway 1985-89 Tuned Port Mass Air Engine Harness. Please pay for all items at the same time. We cannot combine your order if you have already paid. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 66 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. All exchanges need to have reshipping charges included. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway 2005-2006 Chevy GM LS2 V8 Swap Stand Alone Engine Wiring Harness” is in sale since Wednesday, April 08, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Ignition Wires”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Speedway Motors
  • Manufacturer Part Number: 91000506

Speedway 2005-2006 Chevy GM LS2 V8 Swap Stand Alone Engine Wiring Harness
Tagged: , , , , , , , , .

CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU

Posted on by
CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU
CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU
CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU
CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU

CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU
LS Series Stand Alone Wiring Harness With Blue Red OEM ECU. All CBM Motorsports harnesses are completely plug and play with switched power, constant power and ground connections required. Harnesses are professionally constructed from brand new GM Delphi connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. This is not a modified OEM harness. Every clip, connector and pin is brand new. All blunt cut wires are clearly labeled for easy installation. We use genuine weather pack Delphi plugs for every connection (not knock off China plugs). This is a show quality harness and uses all expandable sleeving, not cheap plastic split loom. All wires are correct AWG and have shrink wrap at each end. Every harness comes with a four foot lead to mount the computer under a seat, inside the passenger compartment, on a firewall, etc. The package comes with a water tight relay pack and fuse holder. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Complete Engine and Transmission Wiring Harness including. All engine and transmission sensor connectors. Switched Power Ignition Relay. If available in our tune inventory, we are happy to place a baseline tune in the computer at no additional cost. We are CBM Motorsports based out of Rancho Cucamonga, CA. We specialize in high performance engines for off road vehicles, hot rods, classic cars, drag cars, rock crawlers, boats, and custom vehicles. We carry many specialty parts for the Chevrolet LS series engines, Cadillac Northstar and Shortstar, Chevrolet Ecotec, and finally the classic Chevrolet small and big block. If you are looking for more power out of your current set up or want to build an engine from the ground up look no further. We have a GM world-class certified technician with nearly 20 years of experience and an in house dynamometer. We offer tuning services, engine repair, engine swaps, and custom fabrication. We also have ASE certified technicians and a MECP certified professional. If you are local, please come visit our showroom and see what one of the largest engine suppliers in the nation has to offer. We leave feedback automatically once the item has been paid for. We consider our feedback VERY IMPORTANT. Let us know if there was a mistake made during your order and we will do our best to resolve the issue. We make sure every customer is 100% satisfied no matter the size of the order. Please understand we are a business and appreciate every one of our customers. Custom-made parts may take longer. Please understand Saturday, Sunday & Holidays. If you would like your package. Please let us know and we would be happy to add it to the quote. UPS will not deliver to P. If you are not satisfied with your part or accessory for any reason, you may return it within 14 days of receipt of your order. You may return products that. Do not have missing parts. Are in their original packaging. Are not damaged, previously installed, or used. Were not custom built, painted, or modified for your application. Track Page Views With. Auctiva’s FREE Counter. The item “CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU” is in sale since Friday, September 13, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “custombuiltmotors” and is located in Colton, California. This item can be shipped worldwide.
  • Manufacturer Part Number: CBM-LSBRHECU
  • Warranty: Yes
  • Brand: CBM Motorsports
  • Country of Manufacture: United States
  • Part Brand: CBM Motorsports

CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU
Tagged: , , , , , , .

GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE

Posted on by
GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE
GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE
GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE
GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE
GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE

GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE
GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE. Finally a solution to all of those DIY engine harness builders!! This is the 98-2002 CAMARO STYLE LS1 Engine harness kit which includes. (3) BLACK 3 POSITION (MAF, CRANK, & CAM SENSORS). (1) GREY 3 POSITION (MAP SENSOR). (1) KNOCK SENSOR QUICK DISCONNECT. (2) COIL PACK DISCONNECT. (8) EV1 LS1 INJECTOR CONNECTORS. (1) IAT INTAKE AIR TEMP SENSOR CONNECTOR. (2) OXYGEN SENSOR CONNECTORS. Retainer and seal color may vary. TRANSMISSION PACKAGES AVAILABLE IN T-56 AND 4L60E/4L80E OPTIONS! Looking for that hard to find connector? The item “GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE” is in sale since Wednesday, March 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “connector_supply_guys” and is located in Baldwin, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.
  • Brand: Delphi
  • Manufacturer Part Number: Connector Supply Guys

GM LS1 LSX 24X Engine Wiring Harness DIY BUILD KIT REPAIR KIT CHEVY STAND ALONE
Tagged: , , , , , , , .

FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg

Posted on by
FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg

FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg
FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg. JEGS High Performance 101 Jeg’s Place Delaware, Ohio 43015. The item “FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg” is in sale since Tuesday, May 24, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “jegsperformance” and is located in Delaware, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: FAST
  • Manufacturer Part Number: 301972
  • Warranty: Yes

FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg

Incoming search terms:

  • fast wiring harness
Tagged: , , , , , , , .