Wire Wiring Harness

Flexible Cable Conduit Sleeving Sheathing Split & Unsplit Loom Harness

Posted on by
Flexible Cable Conduit Sleeving Sheathing Split & Unsplit Loom Harness
Flexible Cable Conduit Sleeving Sheathing Split & Unsplit Loom Harness
Flexible Cable Conduit Sleeving Sheathing Split & Unsplit Loom Harness
Flexible Cable Conduit Sleeving Sheathing Split & Unsplit Loom Harness

Flexible Cable Conduit Sleeving Sheathing Split & Unsplit Loom Harness
Operation temperature: -40°C – +130°C, Conduit Split Black Flexible Cable Tidy Tube Trunking. Corrugated Wire Conduit: Inner Ø4.5mm, Inner Ø6.5mm, Inner Ø8.5mm, Inner Ø10mm, Inner Ø12mm. Soft Flexible Conduit Tube allows for a clean and easy installation, well protecting the car/van/auto wires and make a tidy look.
Flexible Cable Conduit Sleeving Sheathing Split & Unsplit Loom Harness
Flexible_Cable_Conduit_Sleeving_Sheathing_Split_Unsplit_Loom_Harness_01_pk Tagged: , , , , , , , , .

Black Spiral Conduit Split Tube / Cable Tidy / Wire Loom / Harness / Trunking

Posted on by
Black Spiral Conduit Split Tube / Cable Tidy / Wire Loom / Harness / Trunking
Black Spiral Conduit Split Tube / Cable Tidy / Wire Loom / Harness / Trunking
Black Spiral Conduit Split Tube / Cable Tidy / Wire Loom / Harness / Trunking
Black Spiral Conduit Split Tube / Cable Tidy / Wire Loom / Harness / Trunking

Black Spiral Conduit Split Tube / Cable Tidy / Wire Loom / Harness / Trunking
Black Conduit Split Tube Cable Tidy / Protection. This listing is for your choice in length and diameter of black corrugated split tube cable tidy / protection. Please select your required length and diameter from the drop down menu. This conduit is made from highly flexible plastic making it ideal for harnessing cables to make looms, cable tidy in your vehicle, home, office and av equipment tv/blue-ray/pc/hi-fi. If you require any further information or you have specific requirements please don’t hesitate to get in contact with us. Temperature: -20°C – +90°C. Max Coil Length: 100 metres. Registered Number England 3414204. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Wire, Cable & Conduit\Wire & Cable\Multiple Conductor Cable”. The seller is “cisonline11″ and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, New Zealand, Norway, Mexico, Switzerland, Bermuda, Guernsey, Gibraltar, Iceland, Jersey, Liechtenstein, Monaco, Antigua and Barbuda, Bahrain, Brazil, Japan, China, Israel, Hong Kong, Indonesia, Malaysia, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Belize, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French Guiana, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Sri Lanka, Macau, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Vietnam.
  • SIZE: 14mm Internal x 18mm External
  • LENGTH: 100 METRE
  • Cables & Connector Options: CABLE TIDY
  • Brand: Flexicon

Black Spiral Conduit Split Tube / Cable Tidy / Wire Loom / Harness / Trunking
Black_Spiral_Conduit_Split_Tube_Cable_Tidy_Wire_Loom_Harness_Trunking_01_pcs Tagged: , , , , , , , , , , .

Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW

Posted on by
Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW
Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW
Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW
Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW
Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW
Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW

Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW
Brand new design – 11/26/2017 – with Scrinia Engineering Phase shift pot. This item is IN STOCK and ships immediately. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup with coil split. All hardware is 100% OEM – with the addition of the Scrinia Engineering Phase Shift pot. Shaft Diameter is M7, No need for drilling – direct fit for Epiphone. (pickups used must be splittable). FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness on Plexiglass mounting plate, Shielded cables. Alpha(JS) B500k Linear taper Push/Pull (Coil Split) on Volume pots. Alpha(JS) A500k Audio taper with 47nF cap on Neck Tone position. Scrinia Engineering Phase shift pot A500k Audio Taper with 47nF cap on Bridge tone position. 5 Pin Quick Connect on the Push/Pull Pots. Epiphone Toggle Switch – Finish: Chrome w/ Black Tip. Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. Fits Epiphone LesPaul, ES335 and other double humbucking Solid or Hollow Body Guitars Comes with all associated mounting hardware for Pots, Switch and output Jack. Made by Epiphone, Improved by Scrinia Engineering. Adding Phase shifting pot on the Bridge Tone – provides 5 more sonic options. Pulling up on the bridge pickups tone control changes the neck pickups wiring to out of phase. This gives another four sonic possibilities with both pickups selected i. Bridge/phase + neck (bridge tone control up). Bridge/phase + neck Single Coil Split (bridge tone control up, bridge volume control up). Bridge Single Coil Split/phase + bridge (bridge tone and volume controls up). Bridge Single Coil Split/phase + bridge Single Coil Split (bridge tone and volume controls, and neck volume control, up). Although youd expect a phase change to sound different only if both the neck and bridge pickups are selected, the Single Coil Split allows for one more option. This 2019 version of the Harness includes Treble Bleed circuits. What does that mean – well. When you turn down the volume control on a vintage guitar, the tone changes too. The treble frequencies are attenuated, and the tone becomes somewhat dull. This is addressed on this version adding Treble Bleed circuit. This way you can maintain a better tone (less high frequency loss) even when you play subtle parts. We are the only suppliers of this part in the US. Note – Some manufacturing dates may show late 2018 – the harness was not released for sale until 2019 though – You will recognize a true Treble bleed harness by the added components which you will not find on the older designs. Note – installing the phase shift on the neck position instead is easily done – and will change the sonic table of options accordingly. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listing. Check my other listings – I have a full line of Quick Connect adapters for Pick Ups -OEM fit, for example this shielded version. The item “Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW” is in sale since Sunday, November 26, 2017. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped worldwide.
  • To Fit: Les Paul, SG, ES335
  • Country/Region of Manufacture: Korea, Republic of
  • California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and chromium (hexavalent compounds), which is known to the State of California to cause birth defects or other reproductive harm. Lead is used in electronics as part of the soldering process as well as on some component terminals as part of alloys to make soldering possible.
  • MPN: Does Not Apply
  • Brand: Epiphone

Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW
Epiphone_Les_Paul_Pro_Wiring_Harness_Coil_Split_and_Phase_Shift_Push_Pull_NEW_01_le Tagged: , , , , , , , , , .

Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW

Posted on by
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW

Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Brand new design with Scrinia Engineering Phase shift and Serial/Parallel Potentiometers. Note – New design launch 11/26/2017 – Serial/Parallel shift potentiometer – Never available before as a Plug’n’PLay solution for Epiphone. This item is IN STOCK and ships immediately. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup with coil split (pickups used must be splittable). All hardware is 100% OEM – with the addition of the Scrinia Engineering Phase Shift pot. Shaft Diameter is M8, No need for drilling – direct fit for Epiphone. FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness on Plexiglass mounting plate, Shielded cables. Alpha(JS) B500k Linear taper Push/Pull (Coil Split) on Volume pots – Now with Treble Bleed circuits. Scrinia Engineering Serial/Parallel shift pot A500k Audio Taper with 47nF cap on Neck tone position. Scrinia Engineering Phase shift pot A500k Audio Taper with 47nF cap on Bridge tone position. 5 Pin Quick Connect on the Push/Pull Pots. Epiphone Toggle Switch – Finish: Chrome w/ Black Tip. Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. On the bridge side – same procedure. Ground connections: a short wire between the tone pots GND connections and the soldering of the string bridge GND wire to any of the metal casings of the pots is all that is needed. Bridgetone is assured through the small connecting cables. Fits Epiphone LesPaul, ES335 and other double humbucking Solid or Hollow Body Guitars Comes with all associated mounting hardware for Pots, Switch and output Jack. Made by Epiphone, Improved by Scrinia Engineering. Adding Phase shifting pot on the Bridge Tone – provides Many more sonic options. This gives another four sonic possibilities with both pickups selected i. Bridge/phase + neck (bridge tone control up). Bridge/phase + neck Single Coil Split (bridge tone control up, bridge volume control up). Bridge Single Coil Split/phase + bridge (bridge tone and volume controls up). Bridge Single Coil Split/phase + bridge Single Coil Split (bridge tone and volume controls, and neck volume control, up). Although youd expect a phase change to sound different only if both the neck and bridge pickups are selected, the Single Coil Split allows for one more option. We have decided to install the S/P pot on the neck position as it gives the best tonal result in our opinion – but you are free to play “guitarist LEGO’s” with the pots- you can place them however you like phas switch on neck or bridge Tone positions or the other way around – FIND YOU OWN SOUND!! If you want you can even ask us for 2 serial/parallel pots – that way you will be able to… Well you get the picture – both neck and bridge in series, one in series the other in parallel etc-etc-etc…. We know what the phase shift does – it shifts the phase giving a narrow scooped sound. The Serial Parallel option gives other sonic options. When you switch the 2 coils of the humbucker in parallel mode results in a lower inductance than in series mode. This changes the frequency response of the humbucker to a more wide frequency response – i. We therefore feel it fits the neck position Humbucker best – but hey! You be the judge and swap it around as you like. This 2019 version of the Harness includes Treble Bleed circuits. What does that mean – well. When you turn down the volume control on a vintage guitar, the tone changes too. The treble frequencies are attenuated, and the tone becomes somewhat dull. This is addressed on this version adding Treble Bleed circuit. This way you can maintain a better tone (less high frequency loss) even when you play subtle parts. We are the only suppliers of this part in the US. Note – Some manufacturing dates may show late 2018 – the harness was not released for sale until 2019 though – You will recognize a true Treble bleed harness by the added components which you will not find on the old designs. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listing. International Buyers Please Note. The item “Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW” is in sale since Sunday, November 26, 2017. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped to United States, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Bahrain, Croatia, Malaysia, Chile, Panama, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Canada, Taiwan, Philippines, Kuwait, Costa rica, Trinidad and tobago, Guatemala, Honduras, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands.
  • To Fit: Les Paul, ES335
  • Country/Region of Manufacture: Korea, Republic of
  • California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and chromium (hexavalent compounds), which is known to the State of California to cause birth defects or other reproductive harm. Lead is used in electronics as part of the soldering process as well as on some component terminals as part of alloys to make soldering possible.
  • MPN: Does Not Apply
  • Brand: Epiphone

Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW
Epiphone_Les_Paul_Wiring_Harness_Coil_Split_Serial_Parallel_Phase_Shift_NEW_01_jc Tagged: , , , , , , , , , .

Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019

Posted on by
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019

Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Ships from San Diego California. Please Note – this is The NEWEST version available from Epiphone. It comes with Treble Bleed circuits fitted to assure the best possible tone. Note: pictures do not show the circuit – rest assured you will receive the harness with this feature. Before you decide – please be aware that we have other versions of this same harness but with MORE SONIC OPTIONS, such as Phase and Serial/Parallel Switching option. We quality check all of them, and we back this product by our support staff of electronics engineers. If you have a question small or big – we know this product in out and can advise you on a dime. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup with coil split. All hardware is 100% OEM. Shaft Diameter is M7, No need for drilling – direct fit for Epiphone. FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness on Plexiglass mounting plate, Shielded cables. Alpha(JS) B500k Push/Pull (Coil Split) on Volume pots -With OEM Treble Bleed. Alpha(JS) A500k on Tone positions. 5 Pin Quick Connect on the Push/Pull Pots. Epiphone Toggle Switch – Finish: Chrome w/ Black Tip. Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. This 2019 version of the Harness includes Treble Bleed circuits. What does that mean – well. When you turn down the volume control on a vintage guitar, the tone changes too. The treble frequencies are attenuated, and the tone becomes somewhat dull. This is addressed on this version adding Treble Bleed circuit. This way you can maintain a better tone (less high frequency loss) even when you play subtle parts. We are the only suppliers of this part in the US. Fits Epiphone LesPaul, SG, ES335 and other double humbucking Solid or Hollow Body Guitars. Comes with all associated mounting hardware for Pots, Switch and output Jack. Note – Some manufacturing dates may show late 2018 – the harness was not released for sale until 2019 though – You will recognize a true Treble bleed harness by the added components which you will not find on the older designs. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listing. International Buyers Please Note. The item “Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019″ is in sale since Wednesday, February 6, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Dominica, Grenada, Saint lucia, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • To Fit: Les Paul, SG, ES335
  • Country/Region of Manufacture: Korea, Republic of
  • California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and chromium (hexavalent compounds), which is known to the State of California to cause birth defects or other reproductive harm. Lead is used in electronics as part of the soldering process as well as on some component terminals as part of alloys to make soldering possible.
  • MPN: Does Not Apply
  • Brand: Epiphone

Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019
Epiphone_Les_Paul_Pro_Wiring_Harness_Coil_Split_Push_Pull_Alpha_Pots_OEM_2019_01_zt Tagged: , , , , , , , , .

Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM

Posted on by
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM
Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM

Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM
This item is IN STOCK and ships immediately. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup with coil split. All hardware is 100% OEM. Shaft Diameter is M7, No need for drilling – direct fit for Epiphone. FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness on Plexiglass mounting plate, Shielded cables. Alpha(JS) B500k Push/Pull (Coil Split) on Volume pots. Alpha(JS) A500k on Tone positions. 5 Pin Quick Connect on the Push/Pull Pots. Epiphone Toggle Switch – Finish: Chrome w/ Black Tip. Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. Fits Epiphone LesPaul, SG, ES335 and other double humbucking Solid or Hollow Body Guitars Comes with all associated mounting hardware for Pots, Switch and output Jack. Consider adding Phase shifting pot on the Neck Tone – 5 more sonic options – see my other listing. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listing. International Buyers Please Note. The item “Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM” is in sale since Saturday, August 26, 2017. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • To Fit: Les Paul, SG, ES335
  • Country/Region of Manufacture: Korea, Republic of
  • MPN: Does Not Apply
  • Brand: Epiphone

Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM
Tagged: , , , , , , , , .