Wire Wiring Harness

2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

Posted on by
2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 09-’14 LY6 (6.0L)/L92 (6.2L) Drive by Wire Standalone Wiring Harness. Application’09-’14 LY6 (6.0L)/L92 (6.2L) Engines with Electronic Throttle Body and T56, Manual, or Non-Electronic Transmissions (TH400, TH350, Powerglide) (Gray 58X Crank Reluctor Only). Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through. Brick – New Jersey – 08724. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. Gen IV Engines require ” E38 ” ECM, contact. Harness is designed to use EV6 fuel injectors, and 58x Crank Sensor. Gen IV Drive by Wire harnesses are designed to use Corvette 6 Pin Accelerator Pedal , available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, 6L80E , 6L90E Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW” is in sale since Tuesday, April 17, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Manasquan, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Manufacturer Part Number: HAR-1043
  • Warranty: Yes
  • Part Brand: PSI

2009-14 LY6 6.0L L92 6.2 STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
Tagged: , , , , , , .

07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

Posted on by
07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 07 -’08 LY6 (6.0L)/L92 (6.2L) Drive by Wire Standalone Wiring Harness. Application’07 -’08 LY6 (6.0L)/L92 (6.2L) Engines with Electronic Throttle Body and T56, Manual, or Non-Electronic Transmissions (TH400, TH350, Powerglide) (Gray 58X Crank Reluctor Only). Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for 2007 – 2008 LY6/L92 Vortec engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through. New Jersey – 08724. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. Gen IV Engines require ” E38 ” ECM, contact. Harness is designed to use EV6 fuel injectors, and 58x Crank Sensor. Gen IV Drive by Wire harnesses are designed to use Corvette 6 Pin Accelerator Pedal , available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, 6L80E , 6L90E Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW” is in sale since Tuesday, April 17, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Manasquan, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Manufacturer Part Number: HAR-1039
  • Warranty: Yes
  • Part Brand: PSI

07-08 LY6 6.0L L92 6.2 PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
Tagged: , , , , , , .

2009-15 LSA S/C (SUPERCHARGED 6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DBW

Posted on by
2009-15 LSA S/C (SUPERCHARGED 6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DBW
2009-15 LSA S/C (SUPERCHARGED 6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DBW
2009-15 LSA S/C (SUPERCHARGED 6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DBW

2009-15 LSA S/C (SUPERCHARGED 6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DBW
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 09 -’15 LSA S/C (6.2L) Drive by Wire Standalone Wiring Harness. Application’09 -’15 LSA Supercharged (6.2L) Engines (CTS-V / CAMARO ZL1) with Electronic Throttle Body and T56, Manual, or Non-Electronic Transmissions (TH400, TH350, Powerglide) (Gray 58X Crank Reluctor Only). Designed to plug directly into Factory LSA Coil / Injector Sub-Harnesses. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for 2009 – 2015 LSA engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. Gen IV Engines require ” E67 ” ECM, contact. Harness is designed to use EV6 fuel injectors, and 58x Crank Sensor. Gen IV Drive by Wire harnesses are designed to use Corvette 6 Pin Accelerator Pedal , available through. Harnesses also available for 6L80E , 6L90E automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “2009-15 LSA S/C (SUPERCHARGED 6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DBW” is in sale since Friday, December 02, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Part Brand: PSI
  • Manufacturer Part Number: HAR-1099
  • Warranty: Yes

2009-15 LSA S/C (SUPERCHARGED 6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DBW
Tagged: , , , , , .

03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0

Posted on by
03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0
03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0
03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0
03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0
03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 03 -’07 Vortec Drive by Wire Standalone Wiring Harness. Application’03 -’07 Chevy, GMC, Cadillac, and Hummer Vortec Engines with Electronic Throttle Body and T56, Manual, or Non-Electronic Transmissions (TH400, TH350, Powerglide). Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’03 -’07 Vortec engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Note: If using an LS style car intake with EV1 fuel injectors please order HAR-1017. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 03 -’07 Vortec Engines require’03 -’07 Vortec (Blue & Green) PCM (Service Number 12586242), contact. Harness is designed to use Multec fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. Vortec Drive by Wire harnesses require 8 pin Throttle Body (GM P/N 12570800 or equivalent) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0″ is in sale since Saturday, April 14, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1015
  • Warranty: Yes
  • Part Brand: PSI

03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0
Tagged: , , , , , , , .

2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)

Posted on by
2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)

2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 06 -’15 LS2/LS3 Drive by Cable (DBC). 2006 – 20 15 24X LS2 CORVETTE, GTO, TRAILBLAZER SS, SSR; CONVERTING TO DRIVE BY CABLE. WITH T56, MANUAL, OR NON-ELECTRONIC AUTOMATIC TRANSMISSIONS. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. These harnesses are designed for Gen IV applications above which originally were Drive By Wire throttle body. The harness will allow for Drive by Cable throttle function with these newer engines and include the correct EV6 injector connectors and provisions for low mount knock sensors and front mounted cam sensor. If using a 58x Engine (LS3, etc) then a Lingenfelter Crank Signal Converter box (available through PSI) is required so the 411 PCM (Red/Blue Connectors) can be utilized. The factory E38 or E67 controller does not have the ability to operate a cable throttle body. If using a 24x LS2 no converter box is required, however a 411 PCM (Red/Blue Connectors) is required. This harness is for retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Please contact PSI for more information. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. Requires’99 -’04 LS1 PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use EV6 fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, 5 wire MAF, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)” is in sale since Sunday, March 10, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1059
  • Warranty: Yes
  • Part Brand: PSI

2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
Tagged: , , , , , .

2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

Posted on by
2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 08 -’15 LS3 (6.2L) Drive by Wire Standalone Wiring Harness. Application’08 -’15 LS3 (6.2L) Engines with Electronic Throttle Body and T56, Manual, or Non-Electronic Transmissions (TH400, TH350, Powerglide) (Gray 58X Crank Reluctor Only). Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for 2008 – 2015 LS3 engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. Gen IV Engines require ” E38 ” ECM, contact. Harness is designed to use EV6 fuel injectors, and 58x Crank Sensor. Gen IV Drive by Wire harnesses are designed to use Corvette 6 Pin Accelerator Pedal , available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, 6L80E , 6L90E Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW” is in sale since Monday, April 16, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Part Brand: PSI
  • Manufacturer Part Number: HAR-1037
  • Warranty: Yes

2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW
Tagged: , , , , , , .

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

Posted on by
1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW
1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW
1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW
1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW
1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW
1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 97 -’04 LS1/LS6 Drive by Wire Standalone Wiring Harness. With T56 or Non-Electronic Transmission. Application’97 -’04 Corvette / CTS-V LS1/LS6 Engines with Electronic Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’97 -’04 LS1/LS6 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 97 -’98 LS1 Engines require’99 -’04 LS1 PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use EV1 fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. LS1/LS6 Drive by Wire harnesses require Corvette, Z06, CTS-V Throttle Body (GM P/N 17113669) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, 5 wire MAF, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW” is in sale since Friday, March 02, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Toms River, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1017
  • Warranty: Yes
  • Part Brand: PSI

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW
Tagged: , , , , , , , .

1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto

Posted on by
1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto

1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 94 -’97 LT1/LT4 Drive by Cable Standalone Wiring Harness. Application’94 -’97 LT1/LT4 Engines with Mechanical Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’94 -’97 LT1/LT4 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 96 -’97 LT1 Engines require’94 -’95 LT1 PCM (Service Number’051), contact. Note that the’96 LT1 PCM (Service Number’399) will work with this harness, however, PSI does not tune these model year PCMs. Harness is designed to use 96′-97′ single connector ignition coil, which is an improved design over the 92′-95′ style (DELCO# D-577). Harnesses are available for 4L60E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto” is in sale since Friday, March 02, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1006
  • Warranty: Yes
  • Part Brand: PSI

1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
Tagged: , , , , , , .

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)

Posted on by
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 99 -’03 Vortec Drive by Cable Standalone Wiring Harness. With T56 or Non-Electronic Transmission. Application’99 -’03 Vortec 4.8, 5.3, 6.0 Engines with Mechanical Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’99 -’03 Vortec retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. Harnesses designed to use’99 -’04 LS1 /’99 -’02 Vortec PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use Multec fuel injectors (gas), 5 wire MAF sensor, and 24x Crank Sensor. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. If using LS car style intake and EV1 injectors, please order HAR-1012. For harness modification including 4L80E transmission, 5 wire MAF, or Fuel Injector (EV6 Flex Fuel) Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)” is in sale since Saturday, March 03, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1019
  • Warranty: Yes
  • Part Brand: PSI

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
Tagged: , , , , .