https://linewiringharness.com Tue, 16 Jun 2026 17:18:39 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://linewiringharness.com/k-series-engine-wiring-harness-for-acura-02-04-rsx-base-high-quality-replacement/ https://linewiringharness.com/k-series-engine-wiring-harness-for-acura-02-04-rsx-base-high-quality-replacement/#comments Thu, 14 Sep 2023 17:21:21 +0000 https://linewiringharness.com/k-series-engine-wiring-harness-for-acura-02-04-rsx-base-high-quality-replacement/








K-Series Engine Wiring Harness For Acura 02-04 RSX Base High Quality Replacement. Is designed as a high quality replacement for 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the for 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC). We used only automotive grade wiring resistant to moisture and most solvents to ensure quality and durability. High quality heat shrink loom is used to cover entire harness which is resistant to gas and crude oil. It is rated for -55° C to 150° C (-67° F to 320° F). We have also used a popular and clean tucked wire layout. The main harness runs over the valve cover and even hides the injector plugs, which come up from under the manifold. OBD2 for HONDA injector plugs come with all harnesses. On swap chassis, the power wire will work with fuse box in factory location or relocated under the dash. Separate power wire is available for other ch assis and those that prefer to run their own charge wiring. Everything is labeled clearly to ensure a simple installation and no confusion. Not easy to damage, easy to install, perfect match with the car. Brand new quality, Strong practicability, high reliability, not easy to damage, long service life. For K-Swap Cars For Acura 02-04 RSX Type S For Acura 02-04 RSX Base For Honda 01-05 Civic EP3 (Type S or K24 Swap). Colour: black Material: ABS. 1 Engine wiring harness. We will make every effort to make your shopping the most pleasant and wonderful!

]]> https://linewiringharness.com/k-series-engine-wiring-harness-for-acura-02-04-rsx-base-high-quality-replacement/feed/ 0 https://linewiringharness.com/k-series-tucked-engine-wiring-harness-for-acura-02-04-rsx-type-s-easy-to-install/ https://linewiringharness.com/k-series-tucked-engine-wiring-harness-for-acura-02-04-rsx-type-s-easy-to-install/#comments Mon, 22 Aug 2022 10:48:28 +0000 https://linewiringharness.com/k-series-tucked-engine-wiring-harness-for-acura-02-04-rsx-type-s-easy-to-install/













Features:Is designed as a high quality replacement for 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the for 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC). We used only automotive grade wiring resistant to moisture and most solvents to ensure quality and durability. High quality heat shrink loom is used to cover entire harness which is resistant to gas and crude oil. It is rated for -55° C to 150° C (-67° F to 320° F). We have also used a popular and clean tucked wire layout. The main harness runs over the valve cover and even hides the injector plugs, which come up from under the manifold. OBD2 for HONDA injector plugs come with all harnesses. On swap chassis, the power wire will work with fuse box in factory location or relocated under the dash. Separate power wire is available for other ch assis and those that prefer to run their own charge wiring. Everything is labeled clearly to ensure a simple installation and no confusion. Not easy to damage, easy to install, perfect match with the car. Brand new quality, Strong practicability, high reliability, not easy to damage, long service life. For K-Swap Cars For Acura 02-04 RSX Type S For Acura 02-04 RSX Base For Honda 01-05 Civic EP3 (Type S or K24 Swap). Colour: black Material: ABS. 1 Engine wiring harness. Package Contents: 1 Engine wiring harness. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Starters, Alternators, ECUs & Wiring\Wiring Harnesses, Cables & Connectors”. The seller is “funshare888″ and is located in this country: CN. This item can be shipped worldwide.

• Brand: Unbranded
• Type: Adapter Plug Connector
• Features: Durable
• Country/Region of Manufacture: China
• Voltage: 120 V
• Manufacturer Warranty: 1 Month
• Placement on Vehicle: Lower
• Color: Black
• Material: Copper,Plastic
• Insulation Material: PE (Polyethylene)
• EAN: 6973692203131

]]> https://linewiringharness.com/k-series-tucked-engine-wiring-harness-for-acura-02-04-rsx-type-s-easy-to-install/feed/ 0 https://linewiringharness.com/k20-k24-k-series-tucked-wiring-harness-for-honda-acura-k-swap-integra-crx-ek-eg/ https://linewiringharness.com/k20-k24-k-series-tucked-wiring-harness-for-honda-acura-k-swap-integra-crx-ek-eg/#comments Thu, 18 Nov 2021 02:33:55 +0000 http://linewiringharness.com/k20-k24-k-series-tucked-wiring-harness-for-honda-acura-k-swap-integra-crx-ek-eg/









K20 K24 K-Series Tucked Engine Harness For Honda Acura K-Swap RSX Civic Si EP3. 02-04 RSX Type S. 01-05 Civic EP3 (Type S or K24 Swap). New design uses factory RSX connectors. Will NOT fit RHD cars or RWD cars. Our Tucked Engine Harness is designed as a high quality replacement 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC). We used only SAE certified automotive grade wiring resistant to moisture and most solvents to ensure quality and durability. High quality military grade heat shrink loom is used to cover entire harness which is resistant to gas and diesel. It is rated for -55° C to 150° C (-67° F to 320° F). We have also used a popular and clean tucked wire layout. The main harness runs over the valve cover and even hides the injector plugs, which come up from under the manifold. RDX injector plugs come with all harnesses. The pins on RDX injector plugs can be fitted into the oem RSX Type S 310cc plugs which makes switching quick and simple. Charge harness is non integrated. We used a thin, but high grade power wire to help keep the overall size down. On swap chassis, the power wire will work with fuse box in factory location or relocated under the dash. Separate power wire is available for other chassis and those that prefer to run their own charge wiring. Everything is labeled clearly to ensure a simple installation and no confusion. All plugs included except EVAP and AC. Covering is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F). SAE Certified Automotive Grade Wiring. All plugs are labeled. Harness runs over valve cover (Can be covered with coil pack cover). Integrated power wire and charge harness. Works with fuse box in stock location or relocated under dash. Injector wiring runs from under manifold between middle runners. Ground wire relocated to stud under coil pack cover (instead of front of the valve cover). Includes single wire temp sensor wire (For k-swap cars stock cluster). 3 Aux wires run from ECU to under intake manifold. Two ECU pins pre-installed. Wiring long enough for both VSS low frequency or high frequency (High Frequency transmissions will require repining plug and slight modification to VSS). Extra knock sensor plug included. RSX injectors plugs come standard (RDX injectors can be easily switched). Listing and template services provided by inkFrog. The item “K20 K24 K-Series Tucked Wiring Harness For Honda Acura K-Swap Integra CRX EK EG” is in sale since Monday, May 31, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Air Intake & Fuel Sensors”. The seller is “jackspaniaracing” and is located in Brandon, Florida. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Number of Pieces: 1
• Manufacturer Part Number: Does Not Apply
• Brand: JackspaniaRacing
• Fitment Type: Performance/Custom
• Manufacturer Warranty: 1 Year

]]> https://linewiringharness.com/k20-k24-k-series-tucked-wiring-harness-for-honda-acura-k-swap-integra-crx-ek-eg/feed/ 0 https://linewiringharness.com/k-tuned-k-series-tucked-engine-harness-with-integrated-power-wire-rsx-type-s-02-04/ https://linewiringharness.com/k-tuned-k-series-tucked-engine-harness-with-integrated-power-wire-rsx-type-s-02-04/#comments Sun, 19 Sep 2021 21:55:21 +0000 http://linewiringharness.com/k-tuned-k-series-tucked-engine-harness-with-integrated-power-wire-rsx-type-s-02-04/










K-Tuned K-Series Tucked Engine Harness w/ Integrated Power Wire RSX Type S 02-04. Will NOT fit RHD cars or RWD cars. Will not fit RSX Base. Fits EP3 Si only with K20A2 or K24 Swap. 02-04 RSX Type S. 01-05 Civic EP3 (Type S or K24 Swap). Note: Will NOT fit RHD cars or RWD cars. Car Model: RSX Type S / Civic Si EP3 Years: 02-04 RSX Type S / 01-05 Civic Si Engine: K Series Swap / K20A2 K24 Swap EP3 / K20A2 RSX S Chassis Code: DC5 EP3. New design uses factory RSX connectors. The K-Tuned Tucked Engine Harness is designed as a high quality replacement 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC). We used only SAE certified automotive grade wiring resistant to moisture and most solvents to ensure quality and durability. High quality military grade heat shrink loom is used to cover entire harness which is resistant to gas and diesel. It is rated for -55° C to 150° C (-67° F to 320° F). We have also used a popular and clean tucked wire layout. The main harness runs over the valve cover and even hides the injector plugs, which come up from under the manifold. RDX injector plugs come with all harnesses. The pins on RDX injector plugs can be fitted into the oem RSX Type S 310cc plugs which makes switching quick and simple. We have incorporated the charge harness and alternator power wire into the harness. We used a thin, but high grade power wire to help keep the overall size down. On swap chassis, the power wire will work with fuse box in factory location or relocated under the dash. Separate power wire is available for other chassis and those that prefer to run their own charge wiring. Everything is labeled clearly to ensure a simple installation and no confusion. All plugs included except EVAP and AC. Covering is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F). SAE Certified Automotive Grade Wiring. All plugs are labeled. Harness runs over valve cover (Can be covered with coil pack cover). Integrated power wire and charge harness. Works with fuse box in stock location or relocated under dash. Injector wiring runs from under manifold between middle runners. Ground wire relocated to stud under coil pack cover (instead of front of the valve cover). Includes single wire temp sensor wire (For k-swap cars stock cluster). 3 Aux wires run from ECU to under intake manifold. Two ECU pins pre-installed. Wiring long enough for both VSS low frequency or high frequency (High Frequency transmissions will require repining plug and slight modification to VSS). Extra knock sensor plug included. RDX injectors plugs come standard RSX Type S injectors use the same pin. Can be easily switched. Please message us for a Return Authorization Number before sending anything back to avoid processing delays. Real Street Performance is unlike most “Race Shops”. We are a fully functioning wholesale and retail distribution warehouse in addition to a dyno-equipped tuning and engine building facility. Our sales center and order fulfillment center operates with state of the art, industry leading software that allows us to get you ALL of the parts you need for your build quickly and correctly the first time without the headaches or excuses. Sign up to our Newsletter. The item “K-Tuned K-Series Tucked Engine Harness with Integrated Power Wire RSX Type S 02-04″ is in sale since Saturday, May 16, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “realstreetrsp” and is located in Sanford, Florida. This item can be shipped worldwide.

• Engine Codes: K Series Swap / K20A2 K24 Swap EP3 / K20A2 RSX S
• MPN: KTH-215-ENG
• Brand: K-Tuned
• Manufacturer Part Number: KTH-215-ENG

]]> https://linewiringharness.com/k-tuned-k-series-tucked-engine-harness-with-integrated-power-wire-rsx-type-s-02-04/feed/ 0