https://linewiringharness.com Thu, 18 Jun 2026 17:22:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://linewiringharness.com/gibson-sg-hand-wired-harness-perfect-to-upgrade-epiphone-2/ https://linewiringharness.com/gibson-sg-hand-wired-harness-perfect-to-upgrade-epiphone-2/#comments Sun, 14 Jun 2026 05:13:42 +0000 https://linewiringharness.com/gibson-sg-hand-wired-harness-perfect-to-upgrade-epiphone-2/










ANY ORDERS PLACED AFTER 20:30 APRIL 30th WONT BE DISPATCHED UNTIL TUESDAY 5th MAY. Hand wired Gibson SG harness perfect to upgrade an Epiphone or similar. Using CTS 500k audio taper potentiometers. Sprague orange drop 0.022uf capacitors. Switchcraft 1/4 inch jack socket. Standard 3 way toggle switch. All wired to 50’s wiring this is the must have combination for any les Paul guitar. 50’s wiring is often considered the best option for a Double humbucker guitars because it preserves clarity and dynamics as you roll the volume down. In this wiring scheme, the tone control is connected to the output of the volume pot rather than the input, which means high frequencies are retained instead of being bled off. As a result, the guitar stays brighter and more articulate at lower volume settings, with less muddiness and more usable sweep on the controls. This makes it especially effective for players who rely on the volume knob for cleanup and expressive control-one of the reasons it became a hallmark of vintage Gibson Les Paul tones. We also do more affordable versions of this harness using different brands of parts which we have tried and tested in our own guitars.

]]> https://linewiringharness.com/gibson-sg-hand-wired-harness-perfect-to-upgrade-epiphone-2/feed/ 0 https://linewiringharness.com/gibson-sg-hand-wired-harness-perfect-to-upgrade-epiphone/ https://linewiringharness.com/gibson-sg-hand-wired-harness-perfect-to-upgrade-epiphone/#comments Mon, 13 Apr 2026 13:17:41 +0000 https://linewiringharness.com/gibson-sg-hand-wired-harness-perfect-to-upgrade-epiphone/










Hand wired Gibson SG harness perfect to upgrade an Epiphone or similar. Using CTS 500k audio taper potentiometers. Sprague orange drop 0.022uf capacitors. Switchcraft 1/4 inch jack socket. Standard 3 way toggle switch. All wired to 50’s wiring this is the must have combination for any les Paul guitar. 50’s wiring is often considered the best option for a Double humbucker guitars because it preserves clarity and dynamics as you roll the volume down. In this wiring scheme, the tone control is connected to the output of the volume pot rather than the input, which means high frequencies are retained instead of being bled off. As a result, the guitar stays brighter and more articulate at lower volume settings, with less muddiness and more usable sweep on the controls. This makes it especially effective for players who rely on the volume knob for cleanup and expressive control-one of the reasons it became a hallmark of vintage Gibson Les Paul tones. We also do more affordable versions of this harness using different brands of parts which we have tried and tested in our own guitars.

]]> https://linewiringharness.com/gibson-sg-hand-wired-harness-perfect-to-upgrade-epiphone/feed/ 0 https://linewiringharness.com/obsidian-wire-solderless-wiring-harness-the-ultimate-guitar-upgrade/ https://linewiringharness.com/obsidian-wire-solderless-wiring-harness-the-ultimate-guitar-upgrade/#comments Thu, 09 Apr 2026 01:08:32 +0000 https://linewiringharness.com/obsidian-wire-solderless-wiring-harness-the-ultimate-guitar-upgrade/ ]]> https://linewiringharness.com/obsidian-wire-solderless-wiring-harness-the-ultimate-guitar-upgrade/feed/ 0 https://linewiringharness.com/ready-built-gibson-3-pot-flying-v-wiring-upgrade-loom-harness58-or67-version/ https://linewiringharness.com/ready-built-gibson-3-pot-flying-v-wiring-upgrade-loom-harness58-or67-version/#comments Sat, 07 Jun 2025 13:23:43 +0000 https://linewiringharness.com/ready-built-gibson-3-pot-flying-v-wiring-upgrade-loom-harness58-or67-version/











Bloodstone Guitar Works specialise in custom building a guitar to your specification, one that you can have the ultimate confidence in its feel, tone and playability and truly cherish. We also produce our own range of Handwound pickups and Handwired wiring looms and undertake upgrades, repairs and setups. Ready Built up Gibson 3 Pot Flying V etc. Wiring upgrade / Loom. Choose from’58 layout (3 pots in line) or’67 layout (3 pots in triangle). These wiring looms are Individually hand-wired from UK-sourced genuine parts using 22 gauge Gavitt vintage cloth covered wire. A drop in replacement and a great performance and reliability upgrade for all Les Pauls. Top quality matched components are used throughout and the “float wire” method is adopted where all wires are pulled tight and elevated so they make no contact with the control /baseplate. It takes a little longer to build but is definitely worth the effort to maximise performance. Matched CTS USA Custom Audio Taper 500K volume (2) and 250K tone Split Shaft Volume & Tone Potentiometers – smooth linear volume and tone change (no bunching or on/off effect) – 500K and 250K pots are what GIbson fit – please ask if you require an alternative. 0.022uF Sprague “Orange Drop” Tone Capacitor – removes the thinness and harshness inherent with budget capacitors. Separate “treble bleed” mod for both pickups – no muddiness of tone when reducing the volume knob. Premium quality Gibson USA (SwitchCraft) / Epiphone equivalent High quality import and No Switch option. Bridge earth wire supplied with heatshrink tube to twist join with exiting earth, solder and insulate. Easy to follow colour coded wiring diagram. PLEASE ASK IF YOU REQUIRE A SOLDERLESS VERSION, ALTERNATIVE POT VALUE, SOLID SHAFT POTS, Etc – THIS CAN USUALLY BE ACCOMMODATED FROM STOCK AT NO ADDITIONAL COST. Fully soldered together and includes all nuts screws and washers ready to fit to your guitar. Atched in-house to within 10 Ohms (CTS pots tolerance can be +/- 20% so a 250K pot can vary from 220-300+ Ohms). Now using the 715p version which is sonically superior to the commonly used 225p. Customer Service Enquiries and m. Ore details, including custom guitars and builds available at: bloodstoneguitarworks.

]]> https://linewiringharness.com/ready-built-gibson-3-pot-flying-v-wiring-upgrade-loom-harness58-or67-version/feed/ 0 https://linewiringharness.com/les-paul-drop-in-wiring-harness-upgrade-with-usa-components-handbuilt-in-the-uk/ https://linewiringharness.com/les-paul-drop-in-wiring-harness-upgrade-with-usa-components-handbuilt-in-the-uk/#comments Thu, 26 Dec 2024 05:09:53 +0000 https://linewiringharness.com/les-paul-drop-in-wiring-harness-upgrade-with-usa-components-handbuilt-in-the-uk/


Les Paul drop in wiring harness upgrade with USA components- handbuilt in the UK. This wiring loom is created from the highest quality components. All the components are the industry favourites in their relative positions. Please note that the cardboard is not included, it is simply used to hold the components in position for product photos. This harness includes:-Switchcraft mono jack socket-2 x 200v rated 0.022uf orange drop capacitor -Switchcraft 3 way toggle switch-500k Audio taper knurled shaft CTS potentiometers-Braided push back vintage style cloth covered wire-Nuts/washers for each of the prior componentsAll components are wired together. All you need to do is remove it from the cardboard, drop it in your guitar, connect your pickups and bridge ground, and rewire the switch and jack through the holes – 10 minutes work! Please note that the cardboard is not included, it is simply uséd to hold the components in position for product photos. Switchcraft mono jack socket. 2 x 200v rated 0.022uf orange drop capacitor. Switchcraft 3 way toggle switch. 500k Audio taper knurled shaft CTS potentiometers. Braided push back vintage style cloth covered wire. Nuts/washers for each of the prior components. All components are wired together.

]]> https://linewiringharness.com/les-paul-drop-in-wiring-harness-upgrade-with-usa-components-handbuilt-in-the-uk/feed/ 0 https://linewiringharness.com/for-audi-a4-car-headlight-modification-upgrade-adapter-conversion-wiring-harness/ https://linewiringharness.com/for-audi-a4-car-headlight-modification-upgrade-adapter-conversion-wiring-harness/#comments Tue, 18 Jun 2024 21:18:47 +0000 https://linewiringharness.com/for-audi-a4-car-headlight-modification-upgrade-adapter-conversion-wiring-harness/





High-quality wiring harness design, non-destructive installation will not destroy the original car cable route, plug and play, simple installation. A pair of wire harness quotes, not headlights quotes! Audi A4 special custom wiring harness, different regions of headlights specific years may be different. If you have any questions, please consult us and we will answer them for you as soon as possible. Our store can customize Headlight Modification Upgrade wiring harness individually or in bulk, welcome cooperation.

]]> https://linewiringharness.com/for-audi-a4-car-headlight-modification-upgrade-adapter-conversion-wiring-harness/feed/ 0 https://linewiringharness.com/prep-work-for-200-amp-upgrade/ https://linewiringharness.com/prep-work-for-200-amp-upgrade/#comments Wed, 21 Feb 2024 09:43:45 +0000 https://linewiringharness.com/prep-work-for-200-amp-upgrade/ ]]> https://linewiringharness.com/prep-work-for-200-amp-upgrade/feed/ 0 https://linewiringharness.com/long-shaft-ready-built-gibson-epiphone-les-paul-wiring-upgrade-loom-harness-kit/ https://linewiringharness.com/long-shaft-ready-built-gibson-epiphone-les-paul-wiring-upgrade-loom-harness-kit/#comments Sun, 30 Apr 2023 00:24:00 +0000 https://linewiringharness.com/long-shaft-ready-built-gibson-epiphone-les-paul-wiring-upgrade-loom-harness-kit/


Bloodstone Guitar Works specialise in custom building a guitar to your specification, one that you can have the ultimate confidence in its feel, tone and playability and truly cherish. We also produce our own range of Handwound pickups and Handwired wiring looms and undertake upgrades, repairs and setups. LONG SHAFT Ready Built up Gibson Les Paul Wiring upgrade / Wiring Loom. Long Shaft Length (18mm thread) – See other listing for cheaper 10mm option. These wiring looms are Individually hand-wired from UK-sourced genuine parts using 22 gauge Gavitt vintage cloth covered wire. A drop in replacement and a great performance and reliability upgrade for all Les Pauls. Top quality matched components are used throughout and the “float wire” method is adopted where all wires are pulled tight and elevated so they make no contact with the control /baseplate. It takes a little longer to build but is definitely worth the effort to maximise performance. Matched CTS USA Custom Audio EVERSE Taper 500K or 250K (You choose) Split Shaft Volume & Tone Potentiometers – smooth linear volume and tone change (no bunching or on/off effect). 0.022uF Sprague “Orange Drop” Tone Capacitors – removes the thinness and harshness inherent with budget capacitors. Separate “treble bleed” mod for both pickups – no muddiness of tone when reducing the volume knob. Premium quality SwitchCraft / High quality import and No Switch option. Bridge earth wire supplied with heatshrink tube to twist join with exiting earth, solder and insulate. Easy to follow colour coded wiring diagram. Fully soldered together and includes all nuts screws and washers ready to fit to your guitar. Atched in-house to within 10 Ohms (CTS pots tolerance is +/- 20% so a 250K pot can vary from 200-300 Ohms). Now using the 715p version which is sonically superior to the commonly used 225p. This item is in the category “Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “bloodstoneguitarworks” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Brunei Darussalam, Egypt, Guernsey, Gibraltar, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Oman, Pakistan, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Kuwait, Philippines, Qatar, Vietnam.

• Jack socket type: Switchcraft 3/8\
• Switch type: SwitchCraft Switch Fitted
• To Fit: Electric Guitar
• Country/Region of Manufacture: United Kingdom
• Brand: Gibson
• Type: Loom

]]> https://linewiringharness.com/long-shaft-ready-built-gibson-epiphone-les-paul-wiring-upgrade-loom-harness-kit/feed/ 0 https://linewiringharness.com/1968-1972-oldsmobile-cutlass-wire-harness-upgrade-kit-fits-painless-complete/ https://linewiringharness.com/1968-1972-oldsmobile-cutlass-wire-harness-upgrade-kit-fits-painless-complete/#comments Mon, 11 Apr 2022 08:53:04 +0000 https://linewiringharness.com/1968-1972-oldsmobile-cutlass-wire-harness-upgrade-kit-fits-painless-complete/






1968 – 1972 Oldsmobile Cutlass Wire Harness Upgrade Kit fits painless complete. This product data sheet is originally written in English. National Speed Depot is your one stop connection for all your speed and performance parts. We don’t just sell parts, we use them too! Our seasoned support crew has over 500 years of combined experience to help you find the right part every time. National Speed Depot offers a large selection of the best brands from around the world. No one beats NSP on price and service. From the track to the street your always a winner when your with National Speed Depot! National Speed Automotive Supply. 1968 – 1972 Oldsmobile Cutlass Wire Harness Upgrade Kit fits painless complete Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal & Flasher Harness –> Yes Dash Harness –> YesEngine Harness –> No Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. We do not accept COD packages. In some cases stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. Toll Free Tech Support. Plug n Play Technology. Turn Signal & Flasher Harness. 7 x 2 x 2. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Starters, Alternators, ECUs & Wiring\Wiring Harnesses, Cables & Connectors”. The seller is “nationalspeeddepot” and is located in this country: US. This item can be shipped worldwide.

• Support: Toll Free Tech Support
• Feature: High Quality Wire
• Fuses: 15
• Plug n Play Technology: Included
• Turn Signal & Flasher Harness: Yes
• Accessory Kit: Yes
• Brand: National Speed Automotive Supply
• Prewired Harness: Yes
• Manufacturer Part Number: ZSSA9E29
• Extra Wire: Yes
• Prewired Terminals: 118
• Vintage Car Part: Yes
• Instructions: Detailed instructions
• Warranty: Limited Lifetime Warranty
• Circuits: 24
• Dimmer Switch: No
• Designed Location: USA
• Engine Harness: Yes
• Fuse Cover: Yes
• Fuse Box Dimensions: 7 x 2 x 2
• Built in Relay: Yes
• Ignition Switch: No
• Color Coded: Yes
• Labeled Wire: Yes
• Headlight Switch: No
• Size: Ultra Small Design
• MPN: ZSSA9E29

]]> https://linewiringharness.com/1968-1972-oldsmobile-cutlass-wire-harness-upgrade-kit-fits-painless-complete/feed/ 0 https://linewiringharness.com/65-70-ford-mercury-mustang-and-cougar-wire-harness-upgrade-kit-fits-painless/ https://linewiringharness.com/65-70-ford-mercury-mustang-and-cougar-wire-harness-upgrade-kit-fits-painless/#comments Sun, 26 Dec 2021 21:15:15 +0000 https://linewiringharness.com/65-70-ford-mercury-mustang-and-cougar-wire-harness-upgrade-kit-fits-painless/






National Speed Depot is your one stop connection for all your speed and performance parts. We don’t just sell parts, we use them too! Our seasoned support crew has over 500 years of combined experience to help you find the right part every time. National Speed Depot offers a large selection of the best brands from around the world. No one beats NSP on price and service. From the track to the street your always a winner when your with National Speed Depot! 65 – 70 Ford Mercury Mustang and Cougar Wire Harness Upgrade Kit fits painless. National Speed Automotive Supply. 65 – 70 Ford Mercury Mustang and Cougar Wire Harness Upgrade Kit fits painless Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal & Flasher Harness –> Yes Dash Harness –> YesEngine Harness –> No Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. We do not accept COD packages. All exchanges need to have reshipping charges included. In some cases stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. The item “65 70 Ford Mercury Mustang and Cougar Wire Harness Upgrade Kit fits painless” is in sale since Wednesday, September 9, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Starters, Alternators, ECUs & Wiring\Other Starters, Alternators, ECUs & Wiring”. The seller is “nationalspeeddepot” and is located in Phoenix, Arizona. This item can be shipped worldwide.

• MPN: ZSSB539E
• Brand: National Speed Automotive Supply
• Feature: High Quality Wire
• Size: Ultra Small Design
• Fuses: 15
• Circuits: 24
• Prewired Terminals: 118
• Accessory Kit: Yes
• Dimmer Switch: No
• Headlight Switch: No
• Ignition Switch: No
• Turn Signal & Flasher Harness: Yes
• Engine Harness: Yes
• Prewired Harness: Yes
• Labeled Wire: Yes
• Color Coded: Yes
• Fuse Cover: Yes
• Built in Relay: Yes
• Extra Wire: Yes
• Plug n Play Technology: Included
• Fuse Box Dimensions: 7 x 2 x 2
• Instructions: Detailed instructions
• Designed Location: USA
• Warranty: Limited Lifetime Warranty
• Support: Toll Free Tech Support
• Vintage Car Part: Yes

]]> https://linewiringharness.com/65-70-ford-mercury-mustang-and-cougar-wire-harness-upgrade-kit-fits-painless/feed/ 0