Wire Wiring Harness

Archives for: September 3, 2019

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator

Posted on by
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW N54 wiring harness adapter. With CAN-BUS emulator and. This Wiring Harness Adapter was developed to allow the installation / swap of an N54 engine with the original engine ECU, into any other BMW car. N54 is a Twin Turbo engine and is available on E90/E91/E92/E93, E60/E61, E82/E88 or E89. This Wiring Adapter is very easy to install. It is a plug and play solution. It is also included an OBD2 plug that you can use with your OBD tool to see live data, fault codes or even flash your ECU. You will find all the information needed and photos on the installation procedure included in this sale. This swap solution with this CAN BUS emulator was tested on a Dyno to make sure there is no power loss, the engine does not enter safe mode. The Engine ECU will store many fault codes due to a no CAN communication with all the others ECU´s (ABS, airbag, cluster, etc), so, we developed this CAN Emulator to simulate all the other e90´s ECU as well as the Junction Box to allow you to do diagnose, without our emulator you will not be able. So, Instead of having more than 20 fault codes, you will only have 5 faults codes. These are not possible to simulate. If you want you can delete these on the memory of the engine ECU with a help of a Chiptuner. The List of the fault codes are available on the instructions procedure. It is only possible to check the engine oil level using an e90´s cluster or diagnostic tool. However we developed on our emulator box a LED to allow you to check if the oil level is ok or not. To use our wiring harness adapter you must have from the new engine, the following SET/parts. Electronic gas pedal. Ignition key reader and the cable to CAS Module. All the wiring/plugs, related to the engine. We have a complete guide to help you removing all the wiring needed for this project. This type of engine ECU is not possible to delete EWS/IMMO. So, you must get CAS and key from the donor car. This product was developed using a N54B30 engine with MSD80 engine ECU, with manual transmission. Our wiring harness for N54 engine will be plug & play on your BMW E30 or E36, please inform us which car you have. Using our Kit all the information on your E30 or E36 cluster will work as stock. To build our wiring harness adaptors, we only use new electric components, original and high quality. We Speak English, Portuguese, French and German. Most items will be sent within 24 hours. Please check out our feedback! VAT invoice: all our items include a VAT invoice supplied with the goods. Please tell us your VAT number for correct invoice. The item “BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator” is in sale since Tuesday, April 9, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “bruno_steering” and is located in Leiria. This item can be shipped worldwide.
  • Non-Domestic Product: No
  • BMW Swap old: BMW Swap old
  • Manufacturer Part Number: BLA015
  • Modified Item: No
  • Custom Bundle: No
  • Reference OE/OEM Number: BMWswap
  • Other Part Number: Swap E46
  • Brand: ANT Steering & Electronics

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW_Swap_Convert_N54_engine_E90_E60_Harness_Wiring_Adapter_with_CAN_BUS_emulator_01_yfsw Tagged: , , , , , , .

Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit

Posted on by
Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit
Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit
Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit
Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit
Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit

Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit
This is the M38A1 Wiring Harness Kit. The kit comes with a partial diagram that if used in conjunction with the diagrams from the original vehicle manuals will give you all of the information that you need for installation. Each component in this kit is metal (Douglas) shelled and each piece is metal number tagged. This M38A1 Wiring Harness Kit contains the following components. 1 Main Chassis Harness. 3 Voltage Regulator Harness. 4 Black Out Drive Light Harness. 6 Fuel Sender Wire. 8 Horn Ground Wire. Also included in this kit are 30 pieces of the One to One Plastic Connectors that are inserted between the Douglas Shells. These connectors are very difficult to find and most companies do not offer them. This kit also comes Turn Signal capable. The main chassis harness has additional wires that initially come taped back in the harness so you can ignore them if you are not adding turn signals to your M38A1. Should you ever choose to add Turn Signal capability to your vehicle then the wired will already be there, hard wired into the harness. All of the components in this kit are U. PLEASE be aware that this kit does not include the One to Two Plastic Connectors nor does it include the Generator to Voltage Regulator Cable. You must reuse these components from your old wiring harness. The item “Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit” is in sale since Friday, April 12, 2019. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “56surplus” and is located in Riverhead, New York. This item can be shipped worldwide.
Vintage Military Jeep M38A1 G758 U. S. Made 24 Volt Wiring Harness Kit

Incoming search terms:

  • anythingu3k
  • countg2p
Vintage_Military_Jeep_M38A1_G758_U_S_Made_24_Volt_Wiring_Harness_Kit_01_bep Tagged: , , , , , , , , .