Wire Wiring Harness

Archives for: October 3, 2019

920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat

Posted on by
920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat
920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat

920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat
920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat. Note: You will have to ream the potentiometer holes out a little to fit the new pots. Introducing 920D Custom Shop’s Vintage Pre-Wired harness for the Epiphone Kat Series including the Wildkat and Alleykat. Just like our highly regarded Strat, Tele and LP harnesses this pre-wired harness uses only the finest electronic components, and is hand soldered in our 920D Custom Shop using Gavitt Braided Shielded Cable, the same wire that is used on Gibson Custom Shop guitars. Replace your stock harness with this premium harness today! All Wiring harnesses include Top Quality Electronic Components: Gavitt Braided Shielded Wire CTS 500K Audio Taper Pots Switchcraft 3 Way Toggle Switch Switchcraft Output Jack. Sigler Music Center has been in business for over 50 years. Sigler Music Center 1191 Sturgis Rd Conway, AR 72034. Accessories, software and manuals MUST be included. Pack your return securely and insure it. We do our very best to help customers when they request to return an item. Customer service is our first and foremost concern. However, there are a few items that are non-returnable. Although unlikely, on occasion an item gets damaged while in transit. Usually when a box shows some wear and tear, the product inside is in perfect condition. Please be sure to inspect the contents. If you receive a product that you believe is defective, message Sigler Music immediately to speak with a product specialist. If necessary, a return authorization will be provided. Please Note: Oversize items need to be repaired locally whenever possible. A Sigler Music team member can help you find a nearby service center. If your item arrives damaged or does not work, please contact our office immediately. The item “920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat” is in sale since Wednesday, October 14, 2015. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Other Guitar Parts”. The seller is “sigler_music” and is located in Conway, Arkansas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Saint lucia, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Cambodia, Sri lanka, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Model: Epiphone Wildkat
  • Country/Region of Manufacture: United States
  • Brand: 920D Custom Shop
  • MPN: WILDKAT

920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat
920D_Custom_Pre_Wired_Wiring_Harness_for_Epiphone_Wildkat_Alleykat_01_jwk Tagged: , , , , , , , .

99-3307G Aftermarket Car Stereo Single/Double Din Radio Install Dash Kit & Wires

Posted on by
99-3307G Aftermarket Car Stereo Single/Double Din Radio Install Dash Kit & Wires
99-3307G Aftermarket Car Stereo Single/Double Din Radio Install Dash Kit & Wires
99-3307G Aftermarket Car Stereo Single/Double Din Radio Install Dash Kit & Wires

99-3307G Aftermarket Car Stereo Single/Double Din Radio Install Dash Kit & Wires
(EQUIPPED WITH MONO INFO SCREEN ONLY) (PLEASE CHECK VEHICLE APPLICATIONS CHART AND EXCLUSIONS). For Use When Replacing the Factory OEM Radio With an Aftermarket Single or Double-Din Radio. THIS ITEM IS 100% BRAND NEW! Aftermarket Single & Double-Din Radio Installation Kit. New (Factory Sealed Packaging). Painted Gray to Match Factory Finish. With 7×4 Inch Double Din Radios (See Notes Below). Vehicle MUST BE Equipped with Monochrome Display. Recently Some Radio Manufacturers started making Double Din Radios with 7 Inch Screens (some slightly smaller). These Double Din Radios are about (7″ W x 4″ H) 7 inches wide by 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without some modifications. Some of these kits have been manufactured for many years before this new size radio became available. As far as we know, none of the Aftermarket Kit Manufacturers are using this new size opening at this time. The Standard Radio Opening for this kit is approximately (6 7/8 in x 3 7/8 in) or (173mm x 98mm). If you have one of these larger radios, you will need to “SAND” or “FILE” the opening of the TRIM RING or BEZEL to make it large enough to clear the “FACE” of your radio. Unfortunately at this time there are no other alternatives that we know of. AN EXPLANATION OF DIFFERENT TYPES OF RADIOS AND COMPATIBILITY. ” NOT COMPATIBLE ” WHEN INSTALLING A FACTORY OEM RADIO OR ATTEMPTING A FACTORY RADIO SWAP. ” COMPATIBLE ” WHEN INSTALLING AN AFTERMARKET DOUBLE DIN RADIO. A DOUBLE DIN RADIO IS ABOUT 7 X 4 INCHES IN SIZE. ” COMPATIBLE ” WHEN INSTALLING (2) STACKED ISO-DIN RADIOS TOGETHER. SEE ISO-DIN DESCRIPTION BELOW, BOTH UNITS SHOULD MATCH DESCRIPTION BELOW. WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITH ” THE USE OF A RADIO SLEEVE OR CAN (USUALLY PROVIDED WITH YOUR RADIO). A SINGLE DIN RADIO IS ABOUT 7 X 2 INCHES IN SIZE AND HAS A METAL SLEEVE AROUND THE FIRST 3 INCHES OF THE RADIO. WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITHOUT ” THE USE OF A RADIO SLEEVE OR CAN, UNIT IS SCREW MOUNTED, MUST HAVE MOUNTING HOLES ON SIDE OF CHASSIS. UNIT IS A SINGLE DIN RADIO ABOUT 7 X 2 INCHES IN SIZE. If you are not sure if your radio will work with this kit. Please use the “ASK A QUESTION” link on the bottom of the page. Please include your Radio Brand and Model Number for faster service. SINGLE & DOUBLE DIN. ISO Din Radio Provision with Pocket. ISO D-Din Radio Provision. Includes Axxess Interface and Wiring Harness. Step-By-Step Comprehensive Instruction Manual. All Necessary Hardware Included for Easy Installation. Before you replace your factory radio with your New Aftermarket Radio, make sure you get the same parts a Professional Installer would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, Dual, Jensen, JVC, Kenwood, Panasonic, Pioneer, Sony, Soundstream, Valor or another stereo, you’ll want to get the right parts with the BEST Fit and Finish. Don’t be fooled by cheap or generic brands, only use Genuine Metra Products. Do you have Steering Wheel Controls like Volume, Track and Seek Buttons? Are these used on a daily basis? Maybe during a morning or evening commute? If so, the ASWC-1 Steering Wheel Control Interface might be the perfect addition. It works with most major brands like Alpine, Clarion, Kenwood, Pioneer, Sony and more. Please see the ASWC-1 LISTING. For complete list of brands and details. If you have any questions, kindly use the “ASK A QUESTION” link on the bottom of the page. (1) METRA 99-3307G Radio Trim Panel. (2) Radio Housing Brackets. (6) #8 x 3/8 Phillips Screws. (2) #10 x 3/4 Phillips Screws. (1) Axxess Interface & Wiring Harness. This ITEM ships “FREE” in the U. Protectorates and APO/FPO Addresses. Must have a valid U. We provide our services as a courtesy to all International Buyers. We are a U. Although these parts work with many vehicles outside the U. To research whether the part they are ordering will MATCH , FIT , WORK or is COMPATIBLE with their vehicle before purchasing. We suggest you check the online forums for your particular vehicle, normally you will find someone who has already posted on this topic and provided the needed information. We apologize, we cannot join every forum to do this. We do our very best to correctly represent all items we sell. Unfortunately, sometimes there may be incidents beyond our control. We realize this can be very frustrating and upsetting, but if you give us a chance, you might be pleasantly surprised to find that there can be solutions to just about any problem. By using the “ASK A QUESTION” link on the bottom of the page. We normally will respond to you within 24 hours or within the next day. Please describe the problem as throughly as possible, pictures are always helpful, so we can see what you are seeing. We reserve the right to determine whether the part(s) will need to be exchanged or another course of action may be taken to resolve this matter quickly and efficiently. We provide our services as a courtesy for all International Buyers ANYONE OUTSIDE THE U. The item “99-3307G Aftermarket Car Stereo Single/Double Din Radio Install Dash Kit & Wires” is in sale since Tuesday, January 23, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation, Dominican republic, El salvador.
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Supported Radio Sizes: Double-Din, DDin, 2Din, ISO-Din with Pocket
  • Special Note: For models equipped with MonoChrome Info Screen!
  • Interchange Part Number: Installation Mounting Trim Plate & Wiring Harness
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • Color: Painted Gray to Match Factory Color and Finish
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Manufacturer Part Number: Metra 99-3307G + 40-EU55
  • Other Part Number: ISO Din Mount, Panel & Antenna Plug
  • Brand: 99-3307G CD Player DVD D-Din Adapter Bezel
  • Modified Item: No
  • Non-Domestic Product: No
  • Custom Bundle: No

99-3307G Aftermarket Car Stereo Single/Double Din Radio Install Dash Kit & Wires
99_3307G_Aftermarket_Car_Stereo_Single_Double_Din_Radio_Install_Dash_Kit_Wires_01_ngb Tagged: , , , , , , , .