Wire Wiring Harness

99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro

Posted on by
99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro
99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro

99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro
METRA 99-3010S-LC AFTERMARKET DOUBLE OR SINGLE DIN RADIO INSTALL KIT FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO STRIPPED DOWN WITH JUST THE BASICS (RAP RETENTION & ACCESSORY POWER). This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. This Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. If you would like a complete set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING for this kit. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). AFTERMARKET RADIO INSTALLATION KIT. PAINTED SILVER TO MATCH FACTORY COLOR AND TEXTURE. TURBO2 RADIO INSTALL DASH KIT. DIN Head Unit Provision with Pocket. ISO DIN Head Unit Provision with Pocket. Double DIN Head Unit Provision. ISO Stacked Head Unit Provision. Stripped Down Version with just the Basics Retains R. P and Accessory Power. Comprehensive Instruction Manual, Including Step-By-Step Disassembly and Assembly. (1) 99-3010S Metra Radio Trim Panel. (1) ISO Trim Plate. (2) Double DIN Brackets. (1) Double DIN Trim Plate. (1) 20-Pin GM Harness. This ITEM ships FREE in the (48 States) Contiguous U. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro” is in sale since Wednesday, November 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam.
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Supported Radio Sizes: Double Din, 2 ISO Din Radios, ISO Din with Pocket
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Interchange Part Number: ISO Din Aftermarket Trim Plate & Wiring Harness
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!
  • Color: Painted Silver to Match Factory Color & Finish
  • Manufacturer Part Number: Metra 99-3010S-LC
  • Placement on Vehicle: Front
  • Other Part Number: 2-Din Installation Mounting Panel & Wire Interface
  • Brand: Metra 99-3010S-LC CD Player DVD Adapter Bezel

99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro
99_3010S_LC_Car_Stereo_Single_Double_Din_Radio_Install_Dash_Kit_for_Camaro_01_wdix Tagged: , , , , , , , .

NEW 1946 1947 Ford V8 pickup original type dash wiring harness 51C-14401-A

Posted on by
NEW 1946 1947 Ford V8 pickup original type dash wiring harness 51C-14401-A
NEW 1946 1947 Ford V8 pickup original type dash wiring harness 51C-14401-A
NEW 1946 1947 Ford V8 pickup original type dash wiring harness 51C-14401-A

NEW 1946 1947 Ford V8 pickup original type dash wiring harness 51C-14401-A
Comes with a easy to understand diagram. Wait for a corrected total BEFORE paying! PLEASE HAVE ALL YOUR ITEMS PAID FOR WITHIN 15 DAYS!! The item “NEW 1946 1947 Ford V8 pickup original type dash wiring harness 51C-14401-A” is in sale since Tuesday, July 17, 2018. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “1935fordtn” and is located in McMinnville, Tennessee. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: does not apply
  • Brand: Ford
  • Non-Domestic Product: No

NEW 1946 1947 Ford V8 pickup original type dash wiring harness 51C-14401-A
NEW_1946_1947_Ford_V8_pickup_original_type_dash_wiring_harness_51C_14401_A_01_lx Tagged: , , , , , , , .

Holden Hq Hj V8 308 253 Wiring Loom Gts Dash Harness Looms

Posted on by
Holden Hq Hj V8 308 253 Wiring Loom Gts Dash Harness Looms
Holden Hq Hj V8 308 253 Wiring Loom Gts Dash Harness Looms
Holden Hq Hj V8 308 253 Wiring Loom Gts Dash Harness Looms
Holden Hq Hj V8 308 253 Wiring Loom Gts Dash Harness Looms

Holden Hq Hj V8 308 253 Wiring Loom Gts Dash Harness Looms
NEW REWIRED HOLDEN HQ GTS V8 253 308 underdash wiring harness / loom. This wire harness has been rewired from Firewall plug. To suit HQ GTS dash. With new wires only reused terminals are fuse box ones, all others are new /nos. Rewired using upgraded wires and has 12 volts at the coil as used with electronic distributor (can be made to suit points). His is a performance loom not a just a copy of a std loom. It has a 6mm main red (std one is 5mm) we use heat shrink & we solder the terminals. Now made with wire colours as best we. To match the std gmh loom. Some colours will not be the same as std some wires have plastic shielding all to make this better than a std loom. It has kick down so can be used as auto or manual. Can be used for a 6 cly or v8. Its has clock wires and all other wire/plugs (some plugs maybe not std colour we as many new or nos plastics as we can) to suit a HQ GTS dash. To be used in a performance. 8cl or 6cly to replace old hard cracked STD looms. Winner to send a std 6cly or v8 loom as change over as we need it before we can make up your loom as we use the fuse box and main firewall plugs. These looms are made to order they do take time to build and the more info about the car we get the better loom you get as it made to suit your car. As this model loom was made so many ways as STD you will have to make sure this will fit you car. Photos are for display purposes only. The item “HOLDEN HQ HJ V8 308 253 WIRING LOOM GTS DASH HARNESS LOOMS” is in sale since Friday, November 8, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Engines, Components\Other”. The seller is “capri1276″ and is located in Mooroolbark, VIC. This item can be shipped worldwide.
  • Compatible Makes: Holden
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: Does Not Apply
  • Brand: nka

Holden Hq Hj V8 308 253 Wiring Loom Gts Dash Harness Looms
Holden_Hq_Hj_V8_308_253_Wiring_Loom_Gts_Dash_Harness_Looms_01_nebb Tagged: , , , , , .

Metra 99-7510 Single Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount

Posted on by
Metra 99-7510 Single Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount

Metra 99-7510 Single Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount
METRA 99-7510 NOT COMPATIBLE WITH CLIMATE CONTROLS. MUST HAVE STANDARD A/C AND HEATER CONTROLS. AFTERMARKET SINGLE DIN RADIO INSTALL KIT. FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO. THIS ITEM IS 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. This Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. If you would like a complete set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING for this kit. Factory Sealed Packaging and 100% BRAND NEW! (Additional Features and Item Specifics Below). AFTERMARKET RADIO INSTALLATION KIT. NOT COMPATIBLE WITH ELECTRONIC CLIMATE CONTROLS. AVAILABLE IN TWO FINISHES: HIGH GLOSS PIANO BLACK & MATTE BLACK. METRA TURBO2 RADIO INSTALLATION DASH KIT. DIN Radio Provision with Pocket. ISO Mount Radio Provision with Pocket. Includes Built-In Oversized Storage Pocket. Painted Matte Black to Match Factory Color and Finish. Retains Full Functionality Of Factory HVAC Controls. Put Your Own Text Within The Factory Display. Includes All Necessary Hardware For A Complete Install. Comprehensive Instruction Manual, Including Step-By-Step Disassembly and Assembly. (1) 99-7510 Metra Radio/ Climate Control Housing with Pocket. (1) ISO Trim Plate. (1) Hazard Switch Extension Cable. (1) Radio Harness, Plugs Into Car Harness at Radio. (1) Interface to OBDII Jumper Harness (Used with Navigation Features Only). (2) Climate Control Extension Harnesses. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “Metra 99-7510 Single Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount” is in sale since Wednesday, November 2, 2011. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation, Dominican republic, El salvador.
  • Interchange Part Number: Aftermarket Trim Plate & Wiring Harness
  • Color: Painted Matte Black
  • Manufacturer Part Number: Metra 99-7510
  • Placement on Vehicle: Front
  • Other Part Number: Installation Mounting Panel & Wire Interface
  • Brand: Metra 99-7510 CD Player DVD Adapter Bezel
  • Supported Radio Sizes: Single Din & ISO Din Mount With Pocket
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!

Metra 99-7510 Single Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount
Metra_99_7510_Single_Din_Radio_Install_Dash_Kit_for_RX_8_RX8_Car_Stereo_Mount_01_fg Tagged: , , , , , , , , .

1973 1987 Chevy 100 MPH Tach Truck Dash Cluster Tachometer Gauge Vacuum

Posted on by
1973 1987 Chevy 100 MPH Tach Truck Dash Cluster Tachometer Gauge Vacuum
1973 1987 Chevy 100 MPH Tach Truck Dash Cluster Tachometer Gauge Vacuum
1973 1987 Chevy 100 MPH Tach Truck Dash Cluster Tachometer Gauge Vacuum

1973 1987 Chevy 100 MPH Tach Truck Dash Cluster Tachometer Gauge Vacuum
1973 – 1987 Chevy 100 MPH Tach Truck Dash Cluster Tachometer Gauge Vacuum&#######xA0. HARD TO FIND ORIGINAL CLASSIC CAR & TRUCK PARTS. Very, very rare gauge cluster with a factory equipped tachometer and super rare vacuum gauge in excellent original condition and includes the tach harness and! &#######xA0; Please use the zoom feature to ensure this item fits your version of the “right part” and that it fits your application as I rely heavily on photos and your viewpoint for part description. I may think this part is really nice or in exceptional condition but that’s my perspective. I may have looked at dozens of broken original parts and know it’s difficult to find a good one that is not broken. You may be looking Taiwan or Chinese reproductions made with half the thickness an OEM part has, but has shiny paint. I think the reproductions are junk because I know from experience they don’t last, you may think my part is junk because the paint is not shiny. We may see things very differently so please take the time to really inspect this part because I love to help people find parts to complete their project, that’s my passion. If you feel like you need to see more or I missed something of importance please let me know and I’ll gladly take additional photos to help you make a more well-informed decision. While these are 50-year-old parts the vast majority of them have been stored away inside since the early to mid-1990’s so they will have fared better than most. Thank you for allowing me to share my passion with you. &#######xA0; I have thousands of original car and truck parts available in my store. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. All of our packages are professionally packed with a custom made box from recycled cardboard. &#######xA0; This will take a little longer but you’ll be pleased with the care that was taken with your part. See our other items. Please use the zoom feature to ensure this item fits your version of the “right part” and that it fits your application as I rely heavily on photos and your viewpoint for part description. The item “1973 1987 Chevy 100 MPH Tach Truck Dash Cluster Tachometer Gauge Vacuum” is in sale since Monday, February 18, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “starcrossedmoongazer” and is located in Tulsa, Oklahoma. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Pakistan, Paraguay, Reunion.
  • Interchange Part Number: GMC SWB
  • Material: Classic, OEM, Vintage, GM, GMC
  • Surface Finish: 1974 1975 1976 1977 1978 1979 1980
  • Manufacturer Part Number: Does Not Apply
  • Placement on Vehicle: Lowrider Air Suspension Ride Pod
  • Other Part Number: 1982 1983 1984 1985 1986
  • Brand: GM
  • Warranty: 1981 1982 1983 1984 1985 1986

1973 1987 Chevy 100 MPH Tach Truck Dash Cluster Tachometer Gauge Vacuum
1973_1987_Chevy_100_MPH_Tach_Truck_Dash_Cluster_Tachometer_Gauge_Vacuum_01_lw Tagged: , , , , , , , .

DASH INSTRUMENT CLUSTER feed wiring harness 68 Ford Mustang with tach

Posted on by
DASH INSTRUMENT CLUSTER feed wiring harness 68 Ford Mustang with tach
DASH INSTRUMENT CLUSTER feed wiring harness 68 Ford Mustang with tach

DASH INSTRUMENT CLUSTER feed wiring harness 68 Ford Mustang with tach
This is a new reproduction DASH INSTRUMENT CLUSTER HARNESS for a 1968 Ford Mustang with tachometer. Note: This harness is used with a DASH HARNESS to complete under dash wiring. EXACT REPRODUCTION WIRING HARNESS. Exact reproduction wiring harness made to factory specifications using the factory blueprints. Our wiring harnesses are correct in every detail. Wiring harnesses connect to different electrical components in various locations throughout the vehicle. Often cars have wiring harnesses that have been “hacked” up and are missing correct connectors to plug into factory components, have corrosion or deterioration damage. These are manufactrued to the original blueprint NOS specifications. In order to satisfy the most discriminating enthusiast/restorer, we offer these authentic reproduction wiring harnesses. These harnesses will provide the finishing touch for any original or restored vehicle. They are built using original Ford blue prints, cut to the exact lengths to provide a tailored look, and contain the correct type and color wire as well as the correct terminals. For those of you concerned about having your car judged, our reproduction wiring harnesses will pass all judging standards. These harnesses are ready to use just “plug in and go”. These harnesses are for owners who want a properly restored concourse quality vehicle, for owners to want to update old existing wiring, or for those who want to add factory installed options. They will look, fit and perform exactly as original. If you dont see it listed just ask as we are always expanded our inventory for the highest in customer service. 64 65 66 67 68 69 70 71 72 1964 1965 1966 1967 1968 1969 1970 1971 1972 ford mustang Shelby kr500 kr350 copo yenko nickey chevy ss super sport 260 289. Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “DASH INSTRUMENT CLUSTER feed wiring harness 68 Ford Mustang with tach” is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Gauges”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.
DASH INSTRUMENT CLUSTER feed wiring harness 68 Ford Mustang with tach
DASH_INSTRUMENT_CLUSTER_feed_wiring_harness_68_Ford_Mustang_with_tach_01_bez Tagged: , , , , , , , , .

95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35

Posted on by
95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35
95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35
95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35
95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35
95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35

95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35
(PLEASE CHECK VEHICLE APPLICATIONS CHART AND EXCLUSIONS). For Use When Replacing the Standard Factory Radio with an Aftermarket Radio. THIS ITEM IS 100% BRAND NEW! 95-7605A + 70-7551 + 40-NI10. Aftermarket Double-Din Radio Installation Kit, Wiring Harness & Antenna Adapter. New (Factory Sealed Packaging). Dark Gray (Not Black). With 7×4 Inch Double Din Radios (See Notes Below). Factory Radio Mounting Bra. This Kit Utilizes / Retains use of the Factory Radio Mounting Brackets. Vehicle Must be Equipped with a Factory Premium Amplified System like “BOSE” Sound System. Recently Some Radio Manufacturers started making Double Din Radios with 7 Inch Screens (some slightly smaller). These Double Din Radios are about (7″ W x 4″ H) 7 inches wide by 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without some modifications. Some of these kits have been manufactured for many years before this new size radio became available. As far as we know, none of the Aftermarket Kit Manufacturers are using this new size opening at this time. The Standard Radio Opening for this kit is approximately (6 7/8 in x 3 7/8 in) or (173mm x 98mm). If you have one of these larger radios, you will need to “SAND” or “FILE” the opening of the TRIM RING or BEZEL to make it large enough to clear the “FACE” of your radio. Unfortunately at this time there are no other alternatives that we know of. AN EXPLANATION OF DIFFERENT TYPES OF RADIOS AND COMPATIBILITY. ” NOT COMPATIBLE ” WHEN INSTALLING A FACTORY OEM RADIO OR ATTEMPTING A FACTORY RADIO SWAP. ” COMPATIBLE ” WHEN INSTALLING AN AFTERMARKET DOUBLE DIN RADIO. A DOUBLE DIN RADIO IS ABOUT 7 X 4 INCHES IN SIZE. ” COMPATIBLE ” WHEN INSTALLING (2) STACKED ISO-DIN RADIOS TOGETHER. SEE ISO-DIN DESCRIPTION BELOW, BOTH UNITS SHOULD MATCH DESCRIPTION BELOW. ” NOT COMPATIBLE ” WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITH ” THE USE OF A RADIO SLEEVE OR CAN (USUALLY PROVIDED WITH YOUR RADIO). A SINGLE DIN RADIO IS ABOUT 7 X 2 INCHES IN SIZE AND HAS A METAL SLEEVE AROUND THE FIRST 3 INCHES OF THE RADIO. WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITHOUT ” THE USE OF A RADIO SLEEVE OR CAN, UNIT IS SCREW MOUNTED, MUST HAVE MOUNTING HOLES ON SIDE OF CHASSIS. UNIT IS A SINGLE DIN RADIO ABOUT 7 X 2 INCHES IN SIZE. If you are not sure if your radio will work with this kit. Please use the “ASK A QUESTION” link on the bottom of the page. Please include your Radio Brand and Model Number for faster service. ISO Double-Din Radio Provision. ISO Stacked Radio Provision. Replaces the Entire Climate Control Panel. Retains Full Functionality of the HVAC System. Painted Aluminum Look to Match Factory Finish. Heavy Duty ABS Plastic Construction. Step-By-Step Comprehensive Instruction Manual. All Necessary Hardware Included for Easy Installation. METRA 70-7551 Amplifier Integration Harness. Plugs into Car Harness at Radio. Factory Radio Plug to Aftermarket EIA Colored Wires. Power & 4 RCA Composite Outputs (May NOT Support all Wires Included in Aftermarket Radio Harness). METRA 40-NI10 Antenna Adapter. Diversity Factory Antenna Plug to Aftermarket Radio Antenna Adapter. Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional installer would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, Dual, Jensen, JVC, Kenwood, Panasonic, Pioneer, Sony, Soundstream, Valor or another stereo, you’ll want to get the right parts with the BEST Fit and Finish. Don’t be fooled by cheap or generic brands, only use Genuine Metra Products. Do you have Steering Wheel Controls like Volume, Track and Seek Buttons? Are these used on a daily basis? Maybe during a morning or evening commute? If so, the ASWC-1 Steering Wheel Control Interface might be the perfect addition. It works with most major brands like Alpine, Clarion, Kenwood, Pioneer, Sony and more. Please see the ASWC-1 LISTING. For complete list of brands and details. If you have any questions, kindly use the “ASK A QUESTION” link on the bottom of the page. (1) METRA 95-7605A Radio Trim Panel. (1) Climate Control Wire Harness. (1) METRA 70-7551 Amp Integration Harness. (1) METRA 40-NI10 Diversity Antenna Adapter. This ITEM ships “FREE” in the U. Protectorates and APO/FPO Addresses. Must have a valid U. We provide our services as a courtesy to all International Buyers. We are a U. Although these parts work with many vehicles outside the U. To research whether the part they are ordering will MATCH , FIT , WORK or is COMPATIBLE with their vehicle before purchasing. We suggest you check the online forums for your particular vehicle, normally you will find someone who has already posted on this topic and provided the needed information. We apologize, we cannot join every forum to do this. We do our very best to correctly represent all items we sell. Unfortunately, sometimes there may be incidents beyond our control. We realize this can be very frustrating and upsetting, but if you give us a chance, you might be pleasantly surprised to find that there can be solutions to just about any problem. By using the “ASK A QUESTION” link on the bottom of the page. We normally will respond to you within 24 hours or within the next day. Please describe the problem as throughly as possible, pictures are always helpful, so we can see what you are seeing. We reserve the right to determine whether the part(s) will need to be exchanged or another course of action may be taken to resolve this matter quickly and efficiently. We provide our services as a courtesy for all International Buyers ANYONE OUTSIDE THE U. The item “95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35″ is in sale since Thursday, May 31, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation.
  • Note: Requires Factory Radio Mounting Brackets
  • Supported Radio Sizes: Double-Din, DDin, 2Din, 2 ISO-Din Stacked Radios
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Interchange Part Number: Aftermarket 2-Din Trim Plate & Wiring Harness
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • Special Note: NOT COMPATIBLE with 2007 G35 Sedan Models
  • Color: Painted Aluminum Look
  • Surface Finish: Painted to Match Factory Color and Finish
  • Manufacturer Part Number: Metra 95-7605A + 70-7551 + 40-NI10
  • Placement on Vehicle: Front
  • Other Part Number: Installation Mounting Panel & Antenna Plug
  • Brand: Metra 95-7605A CD Player DVD D-Din Adapter Bezel
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!

95-7605A Aluminum Car Stereo Double Din Radio Install Dash Kit & Wires for G35
95_7605A_Aluminum_Car_Stereo_Double_Din_Radio_Install_Dash_Kit_Wires_for_G35_01_gu Tagged: , , , , , , , .

99-7803G Single & Double Din Radio Install Dash Kit for Accord, Car Stereo Mount

Posted on by
99-7803G Single & Double Din Radio Install Dash Kit for Accord, Car Stereo Mount

99-7803G Single & Double Din Radio Install Dash Kit for Accord, Car Stereo Mount
METRA 99-7803G AFTERMARKET DOUBLE OR SINGLE DIN RADIO INSTALL KIT FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO. THIS ITEM IS 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. This Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. If you would like a complete set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING for this kit. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). SHOWN IN DOUBLE DIN CONFIGURATION. SHOWN IN SINGLE DIN W/POCKET CONFIGURATION. AFTERMARKET RADIO INSTALLATION KIT. PAINTED GRAY TO MATCH FACTORY COLOR AND FINISH. METRA RADIO INSTALLATION DASH KIT. Double DIN Radio Provision. Single/ISO-DIN Provision with Pocket. Retains all Climate Control Systems Including Both Single-Zone and Dual-Zone. Painted Gray to Match Factory Color and Finish. (No Additional Harness Needed). ASWC (Steering Wheel Control Interface) Ready. Heavy Duty ABS Plastic Construction. (1) Metra 99-7803G Radio Housing Trim Panel. (2) Radio Mounting Brackets. (2) Panel Clip Legs. (2) Panel Clip s. (2) Speed Clip s. (4) #4 x 3/8 Phillips Screws. (2) #10 x 3/4 Phillips Screws. (8) #8 x 3/8 Truss Head Screws. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “99-7803G Single & Double Din Radio Install Dash Kit for Accord, Car Stereo Mount” is in sale since Friday, April 19, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.
  • Interchange Part Number: 2-Din Aftermarket Trim Plate & Wiring Harness
  • Color: Painted Gray
  • Manufacturer Part Number: Metra 99-7803G
  • Placement on Vehicle: Front
  • Other Part Number: ISO- Din Installation Mounting Panel & Wire Plug
  • Brand: Metra 99-7803G CD Player DVD D-Din Adapter Bezel
  • Supported Radio Sizes: ISO Din w/Pocket, Double Din, ISO Din Stacked
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!

99-7803G Single & Double Din Radio Install Dash Kit for Accord, Car Stereo Mount
99_7803G_Single_Double_Din_Radio_Install_Dash_Kit_for_Accord_Car_Stereo_Mount_01_cl Tagged: , , , , , , , , .

Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994

Posted on by
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994

Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
HAS CRACKS SHOWN IN PICS 8,9,10,11. The item “CHEVY/GMC TRUCK DASH ASSEMBLY WITH FUSE PANEL AND WIRE HARNESS GRAY 1988-1994″ is in sale since Tuesday, November 12, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “cam-2″ and is located in Homer City, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Bolivia, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Brunei darussalam, Guernsey, Jersey, Liechtenstein, Martinique.
  • Brand: Chevrolet
  • Color: Gray

Chevy/gmc Truck Dash Assembly With Fuse Panel And Wire Harness Gray 1988-1994
Chevy_gmc_Truck_Dash_Assembly_With_Fuse_Panel_And_Wire_Harness_Gray_1988_1994_01_oy Tagged: , , , , , , , , , .

HOLDEN HQ HJ V8 chev 6cly GTS WIRING LOOM DASH HEADLIGHT ENGINE HARNESS LOOM

Posted on by
HOLDEN HQ HJ V8 chev 6cly GTS WIRING LOOM DASH HEADLIGHT ENGINE HARNESS LOOM
HOLDEN HQ HJ V8 chev 6cly GTS WIRING LOOM DASH HEADLIGHT ENGINE HARNESS LOOM

HOLDEN HQ HJ V8 chev 6cly GTS WIRING LOOM DASH HEADLIGHT ENGINE HARNESS LOOM
NEW REWIRED HOLDEN HQ GTS V8 253 308 underdash wiring harness with underbonnet looms. This underdash wire harness has been rewired from Firewall plug. To suit HQ GTS dash. With new wires only reused terminals are fuse box ones, all others are new /nos. Rewired using upgraded wires and has 12 volts at the coil as used with electronic distributor (can be made to suit points). His is a performance loom not a just a copy of a std loom. It has a 6mm main red (std one is 5mm) we use heat shrink & we solder the terminals. Now made with wire colours as best we. To match the std gmh loom. Some colours will not be the same as std. Some wires have plastic shielding all to make this better than a std loom. It has kick down so can be used as auto or manual. Can be used for a 6 cly or v8. Its has clock wires and all other wire/plugs (some plugs maybe not std colour we as many new or nos plastics as we can) to suit a HQ GTS dash. This loom has a two part plug one side is engine the other is headlight. Headlight side can be made to single or twin. For headlight looms Unless you supply useable Std headlight plastic plugs This loom will be fitted with the newer H4 plug these do fit the std headlight but has no parkers in with the headlights or you can send us your ones to be fitted. To be used in a performance. Winner to send a std 6cly or v8 loom as change over as we need it before we can make up your loom as we use the fuse box and main firewall plugs. These looms are made to order they do take time to build and the more info about the car we get the better loom you get as it made to suit your car. As this model loom was made so many ways as STD you will have to make sure this will fit you car. Photos are for display purposes only. The item “HOLDEN HQ HJ V8 chev 6cly GTS WIRING LOOM DASH HEADLIGHT ENGINE HARNESS LOOM” is in sale since Tuesday, June 4, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Interior\Other”. The seller is “capri1276″ and is located in Mooroolbark, VIC. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: Does Not Apply
  • Brand: nka
  • Non-Domestic Product: No
  • Warranty: 1 Year

HOLDEN HQ HJ V8 chev 6cly GTS WIRING LOOM DASH HEADLIGHT ENGINE HARNESS LOOM
HOLDEN_HQ_HJ_V8_chev_6cly_GTS_WIRING_LOOM_DASH_HEADLIGHT_ENGINE_HARNESS_LOOM_01_gkam Tagged: , , , , , , , , .