Wire Wiring Harness

LS3 (6.2L) Standalone Wiring Harness with 4L60E 58X Drive By Wire DBW. Application: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015. LS3 (6.2L) Engines w/ Electronic Throttle Body w/ 4L60E Transmission (Gray 58X Crank Reluctor Only). Complete Engine and Transmission Wiring Harness including all engine & transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. This set of harnesses are designed for 2008 – 2015 LS3 engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. This Standalone is a complete plug n’ play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. This set of harnesses are professionally constructed from Brand New Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Please Note: harness is non-emissions equipped vehicles and do not include air pump or EGR provisions. Brand New Top Quality! For Fitment, please check the parts compatibility section of this listing. The item “2008-2015 LS3 (6.2L) Standalone Wiring Harness with4L60E 58X Drive By Wire DBW” is in sale since Saturday, December 29, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “parts_links” and is located in Astoria, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Manufacturer Part Number: HAR1038
• Brand: Aftermarket Products
• Fitment Type: Direct Replacement
• Warranty: 90 Day

These are our brand new LSx coil pack extension harnesses along with a set of MSD 32079 Gen III LS plug wires. The coil pack extensions allow you to relocate your ignition coil packs and are approximately 36 long which gives a good bit of flexibility in mounting locations. Two extensions are included. The MSD 8.5mm Super Conductor Wire is “the” performance wire. Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths. The wire set comes with both the Multi-angle boots and the 90 degree boots installed. You will have to cut the boot/terminal combination you do not wish to use and install the black LS terminal/boot for the LS coil ends after cutting to the desired length. The item “LSx LS1 LS3 Ignition Coil Relocation Harness Extensions 36 -Plus MSD Plug Wires” is in sale since Saturday, August 22, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups”. The seller is “warrperformancellc” and is located in Fresno, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Modified Item: No
• Custom Bundle: No
• Manufacturer Part Number: WLS036M
• Other Part Number: MSD 32079
• Brand: WARR Performance
• Non-Domestic Product: No
• Warranty: No
• Placement on Vehicle: Front

We’re a growing name within the aftermarket accessory world. We offer high demand, quality products for a savings vs OEM equipment. Our web gallery has additional images from our satisfied customers. Great compliment to most 4 extended saddlebags. This fender Replace the OEM Fender with pre drilled holes for Easy installation. Plug and play (Not over lay type). Color: Glossy vivid black. Tri function high intense Red LED light Bar- Running, Brake and Turn signals. Smoke LED lens, Red LED lights. Integrate License plate well. Material: Sturdy Molded ABS plastic. Dual cut out for two sided Exhaust System. Harley-Davidson Touring is a registered trademarks of Harley-Davidson, Inc. The use of these terms throughout these listings is for identification purposes only. All textual and graphical content appearing within our listings are the property of Mutazu Inc. Pricing & misprints subject to change. The item “Mutazu CVO 4 Extended Rear Fender w LED & Wire Harness for 93-08 Harley Touring” is in sale since Monday, October 21, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fenders”. The seller is “mutazu” and is located in San Leandro, California. This item can be shipped worldwide.

• Fit: 1993-2008 Harley Davidson Touring
• Number of Pieces: 1
• Type: Replacement Rear Fender
• Color: Vivid Black
• Brand: Mutazu
• Warranty: 30 Days
• Holes: Pre-Drilled
• Material: ABS Plastic
• Lighting: Red LED for Brake, Running and Turn Signal
• Connection: Plug n Play, Wire hardness included
• Lens / LED: Smoke Lense w/ Bright Red LED
• Mufflers setings: Dual Cut Out
• Mounting Instructions: Not Provided
• Mounting Hardware: Not Included
• Surface Finish: Painted
• Manufacturer Part Number: FEX-016-LED-Dual
• Placement on Vehicle: Rear

Painless Wiring Engine Wiring Harness 60250; for Dodge Ram 5.9L Cummins Manual. For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation. All items will be declared as actual value, we do not mark as gift or at a reduced value! We try to consolidate as many items into one box as we can. Some items can not be combined due to size or weight. Items must be in the original packaging. For your protection, we recommend insuring the package for the full value. Please provide pictures if possible (for both the item and the packaging). If you have any questions or concerns regarding the item, please contact our customer service department. To return an item, please follow the steps below. Wait for an RGA number to be issued. This process may take up to 5 days. All instances of fraud are referred to IC3, as well as state and local authorities, and will be prosecuted. Monday – Friday 8AM to 6PM Central Standard Time. The item “Painless Wiring Engine Wiring Harness 60250 for Dodge Ram 5.9L Cummins Manual” is in sale since Thursday, October 6, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Ignition Wires”. The seller is “performancepartsracing” and is located in Lenexa, Kansas. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bermuda, Brunei darussalam, Bolivia, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Martinique, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay.

• Fitment Type: Performance/Custom
• Brand: Painless Wiring
• Manufacturer Part Number: 60250
• MPN: 60250

This is a 1969 Ford Mustang Firewall to Headlamp wiring harness for cars equipped without a factory tachometer. This Harness comes complete with a new weather seal boot. All is included except for the Firewall Hard Shell connector. This part is not included and you must use your old one. There are only two brands on the market. Mustang” (Supplied through Scott Drake) and “Alloy Metal. We offer both brands. Mustang brand is the economy brand offered by most retailers. Alloy Metal’s brand is the concours quality brand. Alloy Metal’s reproduces wiring harnesses to the exact detail of the original. No short cuts here! Alloy Metal is a brand you and your Mustang can depend on. Their wiring harnesses are exactly the same as Ford made them down to the tags and lettering. Wiring connectors are extremely secure. No need to worry about breakage during installation. Alloy Metal is the leader in reproducing concours quality wiring for the Ford Mustang! Notes: Electrical parts are not returnable. The item “1969 Ford Mustang Headlight Wiring Harness for Cars Equipped Without Tachometer” is in sale since Tuesday, December 31, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Headlights”. The seller is “auction2200″ and is located in Arlington, Texas. This item can be shipped worldwide.

• Brand: Alloy Metal Products
• Manufacturer Part Number: 69-HL-W/O-T
• Placement on Vehicle: Front
• Country of Manufacture: United States

LIGHTFORCE HTX MK2 HYBRID 70W HID LED 12V DRIVING LIGHTS WITH WIRING HARNESS. Australias best driving light has evolved! The highly evolved HTX2 Hybrid Driving Lights include enhancements to the award-winning features that Lightforce pioneered with the HTX, to give our leading driving lights an unfair advantage. Next-generation HTX2 Hybrid Driving Lights evolve every aspect to the next level to give you a high-performance light thats more rugged and reliable than ever. Lightforces research and development team, including our industrial designers, electronic and design engineers, and product evaluation and quality assurance professionals are always looking to the future. To make the best even better theyve made numerous modifications to the DNA of our famous hybrid driving lights. The result is the HTX2, a new generation of Australian-designed and manufactured driving light technology that gives you even better control of the road ahead. CHECK OUT ALL THE NEW FEATURES. New robust aluminium one-piece housing. Increased surface area for better heat management. Slimline design to fit most modem bullbars. Profile compatible with more frontal crash avoidance systems. Modular spot and combo filters, and black covers available. More efficient, true 5000K OEM spec Phillips® D1S HID bulb. Reliable German OEM spec Osram® ballast for reduced EMI. Shielded cables surpassing EMC compliance with CE certification. Redesigned seals including a fully integrated waterproof plug. Superior ingress protection surpassing IP68 and IP69K level. New pre-treatment and UV stabilised powder coated finish. Repositioned mounting point with redesigned captive Nyloc® nuts. Improved balance, rigidity and strength. Easy access point for simple HID bulb replacement. PLUS THE HTXS ORIGINAL PROVEN FEATURES. Twenty domeless 5000K Lumileds® Luxeon ZES LEDs. Superior performance and reduced glare. The combination of HID and LED offers amazing performance. 1 Lux at over 1,650 metres and. 25 Lux at over 3,200 metres. CRI of 70 plus for better colour rendering and less eye fatigue. Genuine Gore® waterproof membrane with mechanical seal. Reversible robust mounting base as proven across our LED range. Over, under and reverse voltage and thermal overload protection. Comprehensive installation instructions for easy DIY installation. 2 x Lightforce HTXMK2 driving light. 2 x Reversible mounting bracket and hardware. 2 x Matching 4 pin waterproof harness adaptor. 2 x User Instructions. 1 X LFDLHDS – HTX Wiring Harness with standard switches and user instructions. The item “LIGHTFORCE HTX MK2 HYBRID 70W HID LED 12V DRIVING LIGHTS WITH WIRING HARNESS” is in sale since Monday, April 15, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Lights, Indicators\Fog/Exterior Lights”. The seller is “lightforceau” and is located in Hindmarsh, SA. This item can be shipped worldwide.

• Brand: LIGHTFORCE
• Manufacturer Part Number: HTXMK2
• Beam Type: Spot
• Bulbs Included: Yes
• Warranty: 3 Year

LIGHTFORCE LED180SD LED DRIVING LIGHTS PAIR + WIRING HARNESS – FINAL CLEARANCE. We have found a limited quantity in our warehouse and we will be clearing these out at a super special price. This is never to be repeated and not available in stores. The compact LED180SD is now better than ever. Before; the GEN2 LED180SD comes with all the. Great features of the bigger LED215 but in a size. That will fit almost any vehicle. Cast aluminium construction, two-pack DuPont®. Automotive coating, rugged impact resistant hard. To IP69K standard, the LED180SD may be small but. High pressure cast aluminium body with DuPont® two-pack automotive coating. IP69K rated to protect against moisture / contaminant ingress. Impact resistant polycarbonate filter. Hard coated impact and scratch resistant polycarbonate lens. Custom fabricated dual injected moulded strain relief connector, fitted to military. Genuine Gore® waterproof membrane with mechanical seal. Submersible to 3 metres (9ft 10). Dual illumination – background positioning lights. Over, under and reverse voltage protection. Pulse width modulation thermal management circuitry. Power: 60w (20 x 3w European chipsets). Input voltage range: 10-36V DC. LED lifespan: Up to 50,000 hours. Input cable length: 450mm (17.72). Operating temperature -40°C to 63°C (-40°F to 145°F). Dimensions 181mm (W) x 73mm (H) x 196mm (D). 7.12 (W) x 2.9 (H) x 7.7 (D). Weight including bracket 1.6kg (3.52lb). 2 x Lightforce 180mm LED driving light (CBLED180SD). 2 x Clear filter. 2 x Mount & mounting hardware. 2 X 4 pin Deutsch waterproof connector. 2 X Instruction sheet. 1 x LFDLH Wiring Harness. 1 x Plug-In Adaptor VENHAM – VEHICLE SIDE HARNESS ADAPTOR. The item “LIGHTFORCE LED180SD LED DRIVING LIGHTS PAIR + WIRING HARNESS FINAL CLEARANCE” is in sale since Sunday, July 8, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Lights, Indicators\Fog/Exterior Lights”. The seller is “lightforceau” and is located in Hindmarsh. This item can be shipped worldwide.

• Bulb Type: LED
• Brand: LIGHTFORCE
• Manufacturer Part Number: 1 X CBLED180SD-PP2
• Warranty: 3 Year
• Features: LED Light