Wire Wiring Harness

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator

Posted on by
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW N54 wiring harness adapter. With CAN-BUS emulator and. This Wiring Harness Adapter was developed to allow the installation / swap of an N54 engine with the original engine ECU, into any other BMW car. N54 is a Twin Turbo engine and is available on E90/E91/E92/E93, E60/E61, E82/E88 or E89. This Wiring Adapter is very easy to install. It is a plug and play solution. It is also included an OBD2 plug that you can use with your OBD tool to see live data, fault codes or even flash your ECU. You will find all the information needed and photos on the installation procedure included in this sale. This swap solution with this CAN BUS emulator was tested on a Dyno to make sure there is no power loss, the engine does not enter safe mode. The Engine ECU will store many fault codes due to a no CAN communication with all the others ECU´s (ABS, airbag, cluster, etc), so, we developed this CAN Emulator to simulate all the other e90´s ECU as well as the Junction Box to allow you to do diagnose, without our emulator you will not be able. So, Instead of having more than 20 fault codes, you will only have 5 faults codes. These are not possible to simulate. If you want you can delete these on the memory of the engine ECU with a help of a Chiptuner. The List of the fault codes are available on the instructions procedure. It is only possible to check the engine oil level using an e90´s cluster or diagnostic tool. However we developed on our emulator box a LED to allow you to check if the oil level is ok or not. To use our wiring harness adapter you must have from the new engine, the following SET/parts. Electronic gas pedal. Ignition key reader and the cable to CAS Module. All the wiring/plugs, related to the engine. We have a complete guide to help you removing all the wiring needed for this project. This type of engine ECU is not possible to delete EWS/IMMO. So, you must get CAS and key from the donor car. This product was developed using a N54B30 engine with MSD80 engine ECU, with manual transmission. Our wiring harness for N54 engine will be plug & play on your BMW E30 or E36, please inform us which car you have. Using our Kit all the information on your E30 or E36 cluster will work as stock. To build our wiring harness adaptors, we only use new electric components, original and high quality. We Speak English, Portuguese, French and German. Most items will be sent within 24 hours. Please check out our feedback! VAT invoice: all our items include a VAT invoice supplied with the goods. Please tell us your VAT number for correct invoice. The item “BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator” is in sale since Tuesday, April 9, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “bruno_steering” and is located in Leiria. This item can be shipped worldwide.
  • Non-Domestic Product: No
  • BMW Swap old: BMW Swap old
  • Manufacturer Part Number: BLA015
  • Modified Item: No
  • Custom Bundle: No
  • Reference OE/OEM Number: BMWswap
  • Other Part Number: Swap E46
  • Brand: ANT Steering & Electronics

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW_Swap_Convert_N54_engine_E90_E60_Harness_Wiring_Adapter_with_CAN_BUS_emulator_01_yfsw Tagged: , , , , , , .

BMW Swap Convert M52TU M54 M62 S62 S54-E46, E39 in E36 E30 Harness/Wiring Adapter

Posted on by
BMW Swap Convert M52TU M54 M62 S62 S54-E46, E39 in E36 E30 Harness/Wiring Adapter
BMW Swap Convert M52TU M54 M62 S62 S54-E46, E39 in E36 E30 Harness/Wiring Adapter
BMW Swap Convert M52TU M54 M62 S62 S54-E46, E39 in E36 E30 Harness/Wiring Adapter
BMW Swap Convert M52TU M54 M62 S62 S54-E46, E39 in E36 E30 Harness/Wiring Adapter

BMW Swap Convert M52TU M54 M62 S62 S54-E46, E39 in E36 E30 Harness/Wiring Adapter
Wiring harness adapter with instructions. This Wiring Harness Adapter was developed to allow the installation / swap of an E46 or E39 engine into an E36, E30, E34 or Z3 car. This Wiring Adapter is very easy to install. Basically you only need to connect some plugs, power supply (+12 V) and ground. You will find all the information needed and photos on the installation procedure included in this sale. First you must remove your old engine and engine wiring harness. Then, you install your new engine with the wiring harness from this engine. After this, you will find that this wiring harness already has 4 connectors to the ECU. The other connector of the ECU (Connector 4) will be provided on our wiring harness. This Wiring Adapter also have an OBD2 plug where you can check errors, live data, etc. This Wiring Adapter was developed and tested to the following engines. With DME/ECU MS42 from E39 or E46. With DME/ECU MS43 from E39 or E46. With DME/ECU MSS54 from E46. M62TUB or S62 from E39. Will not work at M54 engine with MS45 DME/ECU. You only need to delete the EWS/IMMO then everything will work. You can use a Radiator with Electric Fan from E46 into your E30 or E36, please inform us during your order. We will build your wiring harness with that option or not. This wiring harness adapter will work, if you have at the engine bay a 20 position plug (Photo 4). For E34 and Z3 – We need to know more Info about your car. For LHD cars – Using an E46 engine – If you want to install the new ECU/DME near the glove box, you can use a Complete Engine Wiring Harness from E39. To produce your wiring harness we need to know the following information from your car / project. What is your car? Which engine you want to swap? Which DME/ECU your new engine use? Which car the engine came from? If your engine is from an E46, will you install a complete wiring harness from E39? Complete wiring harness from E39. If your engine is from an E46, will you install the E46 radiator and electric fan? To build our wiring harness adaptors, we only use new electric components, original and high quality. We Speak English, Portuguese, French and German. Most items will be sent within 24 hours. Please check out our feedback! VAT invoice: all our items include a VAT invoice supplied with the goods. Please tell us your VAT number for correct invoice. The item “BMW Swap Convert M52TU M54 M62 S62 S54-E46, E39 in E36 E30 Harness/Wiring Adapter” is in sale since Wednesday, August 2, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “bruno_steering” and is located in Leiria. This item can be shipped worldwide.
  • Non-Domestic Product: No
  • BMW Swap old: BMW Swap old
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: BLA009
  • Reference OE/OEM Number: BMWswap
  • Other Part Number: Swap E46
  • Brand: ANT Steering & Electronics

BMW Swap Convert M52TU M54 M62 S62 S54-E46, E39 in E36 E30 Harness/Wiring Adapter
BMW_Swap_Convert_M52TU_M54_M62_S62_S54_E46_E39_in_E36_E30_Harness_Wiring_Adapter_01_rmcs Tagged: , , , , , .