Wire Wiring Harness

1968 Yamaha DT1, 250 Enduro Main Wiring Harness (or “Wiring Loom” if you are from Europe) Available in Silver or Black… ! The motorcy cle pictured is not included. It uses modern, high quality modern OEM wire. The same wire that is used in the engine compartments of new cars. Pure copper and higher temperature ratings…. Vastly superior to the plastic insulation Yamaha used in 1968. All conductors have the same color markings as the original. T hese are faithfully reproduce d from the original NOS harnesses. All connectors are crimped and soldered using OEM tooling. The connectors won’t separate from the wiring when unplugging a wire. All connectors are compatible with t he original Yamaha versions. That means your original bullet connectors and ignition switch work perfectly with this harness. There are at least 3 versions of the 1968 harness. We can reproduce any specific 1968 DT1 from a sample. We also make the following 1969- 1973 DT1/2/3, RT1 /2/3 harness. You have a choice : A. Black wrap/silver headlight sleeve , without the turn si gnal wires, and no fender in -line fuse connection. Black wrap/silver headlight sleeve , with all the turn signal wires and t he fender in-line fuse C. Silver wrap/silver headlight sleeve , without the turn si gnal wires, and no fender in -line fuse connection. Silver wrap/silver headlight sleeve , with all the turn signal wires and t he fender in-line fuse connection. Information that you need to provide. Do you have or want a stop light switch on the handlebar brake lever? Does your ignition switch have 7 or 10 wires? Do you have a voltage regulator choke? Each harness is built to or der. We will work with you to get a fair price. We don’t have time for any scams, etc. If you are a Nigerian prince that needs to get his fortune over here… Submit your request to Seal Team 6. The item “1968 Yamaha 68 DT1 250 Enduro Wiring Harness Wire Loom NOS Vintage Repro OEM” is in sale since Monday, November 19, 2012. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “enduro-doctor” and is located in Raleigh, North Carolina. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan, Taiwan.

• Manufacturer Part Number: 214-82590-20, Later models use the 233-82590-21
• Surface Finish: Silver or Black
• Part Brand: 1968 Yamaha DT1 250 Enduro
• Country of Manufacture: United States

Brand new aftermarket recreation of the wiring harness for the Honda 360. Meets or exceeds all OEM specifications. The item “Honda CB 360 CB360 Wiring Harness Loom” is in sale since Monday, April 23, 2018. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Wires & Electrical Cabling”. The seller is “sparckmoto” and is located in Albany, Oregon. This item can be shipped worldwide.

• Brand: Honda
• Manufacturer Part Number: 32100-369-000

Jeep Wrangler 4.0 engine wire harness in super nice shape. Very complete and from a running Jeep. Fits all 4.0 Wranglers 92-95. We try to provide you with the best used parts at the lowest prices. DeadJeep is a wholesaler of OEM used parts. DeadJeep is your first and only stop for rebuilding or repairing your Jeep. We compassionately harvest parts from donor Jeeps at the end of their life. We provide the best hospice care until the Jeep moves on. Your tracking information will be emailed to you as soon as your order is processed. We must have your entire physical address. Please allow enough time for your information to be entered after your order has been placed. The item “Jeep Wrangler YJ 92-95 4.0 6cyl Engine Wire Wiring Harness Loom FREE SHIPPING” is in sale since Tuesday, October 2, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “deadjeeps” and is located in East Freetown, Massachusetts. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Bahamas, China, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Bolivia, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.

Main wiring harness for Air Lift V2 Management Syaytems. Pre-wired 40 amp relay with weather tight connector. 30 amp fuse with holder. Main Wiring plug for V2 Manifold Block. This harness is compatible with any of the AutoPilot V2 systems. This harness allows for the integration of a second compressor into any AutoPilot V2 Digital Control System. Compressor is not included. This harness is compatible with any of the following AutoPilot V2 systems. PLEASE NOTE THAT THERE ARE NO EXCEPTIONS TO THIS RULE. CARRIAGE CHARGE APPLIES TO UK MAINLAND ONLY. I WILL NOT SEND OUT TO NEW EBAYERS WHO HAVE UNCONFIRMED ADDRESSES. The item “AIR LIFT AUTOPILOT V2 MAIN WIRING HARNESS LOOM WITH RELAY AND MAIN PLUG” is in sale since Wednesday, July 6, 2016. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Suspension\Other Performance Suspension”. The seller is “caraudiosale” and is located in MIDDLESEX. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Czech republic, Denmark, Estonia, Finland, France, Germany, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Liechtenstein.

• Manufacturer Part Number: 0001-LOOM
• Brand: AIRLIFT
• Part Manufacturer: Air Lift Performance

WIRING SPECIALTIES PRO COIL PACK HARNESS. The Wiring Specialties PRO SERIES Coilpack Harness is designed for a direct drop-in installation The New Nylon Loomed Harness will look and perform flawlessly Pro Series Coilpack Sub-Harness Features. High Temp Nylon looming with adhesive shrink tubing. High Temp wire (280 degrees). OEM connector specs (no cheap aftermarket connectors that fall apart). Designed for a factory-like installation. OEM connections and’T’ junctions. No soldered connections at all. Fully tested after production for an easy plug-and-play replacement. PLEASE SEE PHOTOS FOR VEHICLE COMPATIBILITY. Bank deposit is available for Australian customers only. Account details: Account name- performance wise BSB number – 732682 Account number – 539524 Bank- Westpac. If the item is faulty, we will post a working replacement. If a replacement is unavailable, we will fully reimburse the customer. If the item is not faulty, it will be sent back at the customer’s expense and no reimbursement will be offered. Performance-Wise records the condition of items before they are sent out. If the item is the incorrect size or does not suit the buyers needs then you can return the item to us at the buyers expense. These Terms and Conditions are in addition to, and do not replace or take away, your rights under Australian law. Check out my other listings. The item “WIRING SPECIALTIES PRO COIL PACK HARNESS LOOM BNR32 R32 GTR SKYLINE RB26DETT” is in sale since Monday, February 9, 2015. This item is in the category “Vehicle Parts & Accessories\Car Parts\Ignition\Ignition Coils & Modules”. The seller is “performance-wise” and is located in New South Wales. This item can be shipped worldwide.

• Ignition Part Type: Ignition Coil Pack Wiring Loom Harness
• Manufacturer Part Number: WRS-RB26COIL
• Brand: Wiring Specialties
• Part Manufacturer: Wiring Specialties
• Part Manufacturer Number: WRS-RB26COIL

This is a BRAND NEW OEM FACTORY wiring harness for a. This is complete, with all the plugs for the headlights, key, brakes, etc. Ready to install on a 2004 or 2005 YFZ450, 04 or 05 YFZ 450. FREE product replacement if you are unsatisfied. Thanks for shopping at MOTOR CITY ATV, LLC of Metro Detroit, MI. We take apart hundreds of ATVs every year, if you need a part, just ask, we have it! Many Yamaha Banshee and YFZ450 parts are universal, and will fit the following years: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013. 87 88 89 90 91 92 93 94 95 96 97 98 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13. Track Page Views With. Auctiva’s FREE Counter. Add a map to your own listings. The item “NEW 2004 2005 Yamaha YFZ450 Complete factory OEM Wiring harness loom & plugs” is in sale since Monday, August 13, 2018. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Electrical Components”. The seller is “minkia38″ and is located in Macomb, Michigan. This item can be shipped worldwide.

• Part Brand: Yamaha
• Modified Item: No
• Custom Bundle: No
• Manufacturer Part Number: 5TG825900000
• Brand: Yamaha
• Non-Domestic Product: No
• Warranty: Unspecified Length

HOLDEN & FORD REBUILD ESSENTIALS. Radiator & Heat & Cool. Engine & Trans Mounts. Struts – Bonnet & Boot. Seals, Rubbers & Mounts. Holden Torana LC Taillight Loom / Harness NEW. Wire tail light stop indicator. You are looking at a Taillight loom or harness. Brand new reproduction to original specifications. Correct length with remanufactured bonded wire to replicate original. New GM OEM globe sockets, terminals & connectors. Pre fitted with globes & tested for quality assurance. Will suit LC models only. Thanks for looking and don’t forget to check out all of our Restoration Essentials in our store. (formally Kingswood Country) was first established in 1986. Updating our name to. Came about because in addition to specialising in new Restoration, Used and New (genuine / non-genuine) parts for your Holden Kingswood & Torana we are also now growing our range of parts for pre-Kingswood models plus Commodore and early Fords. We source and manufacture a range of restoration parts for your dream car rebuild. These are the best and closest we can find to original parts at affordable prices and we are proud to offer these under our own. We are a family owned and operated independent business located in Melbourne’s Sth East suburb of Moorabbin. Thanks for looking at our store and hope to talk with you soon. Any questions please send us a message and we will get straight onto it for you. We’re a shop/warehouse and you are most welcome to drop in and browse or pick-up your items. We accept payments to suit your requirements. Fast easy and secure. BANK TRANSFER or BANK DEPOSIT. Online or over your Bank’s counter. Our bank details are displayed when you are in checkout. We’re a shop/warehouse in Moorabbin. You are most welcome to drop in and browse or pick-up your items. By consolidating your parts into the one parcel. We can only do this before you pay for the items. Most parts are sent by Australia Post’eParcel’ with tracking and larger parts by door-to-door courier. Parts that can’t be sent by Australia Post will be sent by door-to-door Courier and details will be emailed to you for this process. We offer good old fashioned, common sense warranties. We may need proof (pics etc) so we can claim against the carrier. The item “Holden Torana LC Taillight Loom / Harness NEW. Wire tail light stop indicator” is in sale since Monday, August 22, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Lights, Indicators\Tail Lights”. The seller is “restocountry” and is located in Melbourne. This item can be shipped to Australia, all countries in Europe, United States, Japan, Canada, New Zealand.

• Brand: Unbranded
• MPN: Does not apply
• Manufacturer Part Number: Does not apply

Brand New Genuine Emerald K6 ECU Full Generic Wiring Loom Harness for 6 Cylinder. Emerald full generic wiring harness for 6 cylinder engines. In house designed and assembled with high quality automotive materials to provide ease of installation and flexibility for a wide variety of 6 cylinder engines in conjunction with our standalone ECU. Available for both, K3 ECU and K6 ECU. All wires are twisted to avoid any possible interference and labeled for easy installation. The wiring loom is available in a variety of base configurations. Inductive crank sensor Inductive crank & cam sensors Digital crank sensor Inductive crank sensor & digital cam sensor Digital crank sensor & inductive cam sensor Digital crank sensor & digital cam sensor. And two options of Injectors layout. I line (all injectors in one straight row) U line injectors on two sides. 3 on each side. Standardised lengths (shown from ECU to connection). Crank sensor wires (shielded), unterminated – 1700mm Cam sensor wires (shielded), unterminated – 1700mm Coil Pack wires, unterminated – 1850mm Fuel Injector wires, I line, junior timer or EV6 connectors- 1550/1650/1750/1850/1950/2050mm Fuel Injector wires, U line, junior timer or EV6 connectors – 1550/1650/1750/2350/2450/2550mm Air temp sensor wires, junior timer connectors – 2000mm Coolant temp sensor wires, junior timer connectors – 2000mm MAP sensor wires, unterminated – 2000mm TPS sensor wires, unterminated – 2000mm Lambda sensor wires, unterminated – 1960mm Main Relay – 530mm Fuel Pump Relay wire, unterminated – 2000mm Cooling Fan wire, unterminated – 2000mm Shift-light, unterminated – 1850mm Tacho Driver wire, unterminated – 1850mm Battery +12v wire, unterminated- 1700mm Earth wire, unterminated – 1700mm. The majority of sensor and output wires are supplied unterminated so that wire length can be trimmed and connectors of your choice fitted as required. Various suitable connectors are available from our Shop. Please check your requirements before ordering. Full custom looms also available, send us a message and we will do our best to provide you with a solution. See the shop for the full range of Emerald Ecu management & accessories. See the shop for 100’s more of the best available Performance & Genuine VW Parts. Get news of New Parts to your inbox. Emerald K6 ECU Full Generic Wiring Loom Harness for 6 Cylinder Genuine New Part. Choosing the right Air Lift Kit. Car Gaming Racing Simulators. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. All other Non VW Parts. Please check this listing page carefully as the answer is usually there. Of course it could be cancelled if after the conversation, it turns out not to be a suitable part/product for you. For 1000s more of the best available parts. Made with in Great Britain. Template Managed & Developed by Dev VIP. The item “Emerald K6 ECU Full Generic Wiring Loom Harness for 6 Cylinder Genuine New Part” is in sale since Saturday, July 16, 2016. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Performance ECUs”. The seller is “vw-parts-international” and is located in UK. This item can be shipped worldwide.

• Brand: Emerald
• Manufacturer Part Number: N/A
• Includes:: Full Generic wiring loom (harness) for Emerald ECU – 6 cylinder

Original style cloth insulation, color coded as factory. Comes with wiring diagram. This harness fits perfect! This is the main harness for under dash through firewall to engine. Other harnesses may be needed to be a complete harness. Call store for additional information regarding what will be needed for your vehicle. The item “1952 Ford pickup Cowl Wiring, F1, F2, F3 V8 cowl wire loom wiring harness” is in sale since Monday, March 26, 2012. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “mwearlyford” and is located in Springfield, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.

• Manufacturer Part Number: 2RC-14401

Item listed is a new genuine adapter cable loom injection nozzle OE part number 03G 971 033 L and applies to the following brands and their respective models within the years listed for a more accurate reading please refer to vehicle compatibility or simply ask for help. GOLF 2004 – 2009 GOLF PLUS 2005 – 2009 JETTA 2006 – 2011 T. OURAN 2006 – 2010. A3 2004 – 2008 A4 2005 – 2008 A4 QUATTRO 2005 – 2008 A6 2005 – 2008 A6 QUATTRO 2005 – 2008. ALTEA 2007 – 2013 LEON 2006 – 2013 TOLEDO 2005 – 2009. OCTAVIO 2004 – 2013 SUPERB 2008 – 2013. The application data supplied serves as guide only. If you are not sure of compatibility please ASK and forward me your registration number or your chassis (VIN) number and i will gladly confirm. AS I have the latest up to date electronic parts Catalogues. The item “NEW GENUINE VW AUDI SEAT SKODA DIESEL INJECTOR WIRING LOOM 03G971033L” is in sale since Tuesday, November 15, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Air Intake & Fuel Delivery\Fuel Injection Parts”. The seller is “1avit1″ and is located in Berkshire. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Saudi arabia, South africa, United arab emirates, Ukraine, Chile.

• Manufacturer Part Number: 03G971033L
• Modified Item: No
• Country/Region of Manufacture: Germany
• Custom Bundle: No
• Reference OE/OEM Number: ADAPTOR CABLE LOOM
• Unit Type: Unit
• Other Part Number: 03G133033L
• Unit Quantity: 1
• Brand: VW
• Non-Domestic Product: No
• Placement on Vehicle: Front
• Brand Type: Genuine OEM
• Type: Wiring Harness