Wire Wiring Harness

LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck

Posted on by
LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck
LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck
LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck
LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck
LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck
LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck

LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck
LS1/LS6 Conversion Standalone Wiring Harness. This harness is designed for 97-04 LS1/LS6 Corvettes and 99-06 drive-by-cable GM Trucks with 4L60E automatic transmissions. Fuse/Relay Box Fuel Pump Control Fan Controls Check Engine Light, Speedometer, Tachometer, OBD2 IAC and TPS MAF Sensor MAP Sensor Engine Coolant Temp Sensor Alternator Control (2) Upstream Oxygen Sensors Crankfshaft Position Camshaft Position Fuel Injectors Coil Packs Manual or Automatic Transmission Control Knock Sensors. 99-04 CORVETTES, 99-06 GM TRUCKS. Fits LS1/LS6 (5.7L) Corvettes and Vortec (4.8L, 5.3L, 6.0L) GM trucks. Fits drive-by-cable applications with LS1 intake manifolds and 4L60E automatic transmissions. FOR USE WITH TSP PRODUCTS. TSP adapter 81033 required in order to use GM #12592525 MAP sensor. Will plug into TSP 81050 injectors with their included adapters. We will be glad to assist you any way we can. Our goal is to provide you with the best service possible. If, for some reason you do not feel you have received a “5 star” service, please contact a customer service representative. The item “LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck” is in sale since Monday, May 4, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “jlfab118″ and is located in Harrisonburg, Virginia. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay.
  • Manufacturer Part Number: WH1201
  • Brand: TSP
  • Warranty: 1 Year

LS1/LS6 Swap Conversion Wiring Harness Drive-By-Cable Auto 4.8/5.3/6.0 Truck
LS1_LS6_Swap_Conversion_Wiring_Harness_Drive_By_Cable_Auto_4_8_5_3_6_0_Truck_01_ahmg Tagged: , , , , , , , .

How To Swap Car DVD Wiring Harness Yellow And Red Wire

Posted on by
How_To_Swap_Car_DVD_Wiring_Harness_Yellow_And_Red_Wire_01_bsza Tagged: , , , , .

03-07 Vortec 4L60e Standalone Swap Wiring Harness DBW LS1 LSX Intake Multec

Posted on by
03-07 Vortec 4L60e Standalone Swap Wiring Harness DBW LS1 LSX Intake Multec
03-07 Vortec 4L60e Standalone Swap Wiring Harness DBW LS1 LSX Intake Multec
03-07 Vortec 4L60e Standalone Swap Wiring Harness DBW LS1 LSX Intake Multec

03-07 Vortec 4L60e Standalone Swap Wiring Harness DBW LS1 LSX Intake Multec
03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY WIRE W/4L60E 4.8 5.3 6.0 EV6. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. Harness allows use of the factory Vortec intake manifold and multec injectors with flex-fuel injectors (EV6) optional. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. The item “03-07 Vortec 4L60e Standalone Swap Wiring Harness DBW LS1 LSX Intake Multec” is in sale since Tuesday, November 12, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “maddogperformance” and is located in Brandon, Florida. This item can be shipped worldwide.
  • Type: Wiring Harness
  • Manufacturer Part Number: 9101
  • Brand: CNCH
  • Fitment Type: Performance/Custom
  • Bundle Listing: Yes

03-07 Vortec 4L60e Standalone Swap Wiring Harness DBW LS1 LSX Intake Multec
03_07_Vortec_4L60e_Standalone_Swap_Wiring_Harness_DBW_LS1_LSX_Intake_Multec_01_wt Tagged: , , , , , , , , .

Hasport EGWK K Swap Conversion Wiring Harness fits 92-95 Honda Civic / Integra

Posted on by
Hasport EGWK K Swap Conversion Wiring Harness fits 92-95 Honda Civic / Integra
Hasport EGWK K Swap Conversion Wiring Harness fits 92-95 Honda Civic / Integra

Hasport EGWK K Swap Conversion Wiring Harness fits 92-95 Honda Civic / Integra
Hasport K Series Conversion Wiring Harness is a. Civic (w/ K-Series Motor). Brand New in a box. The item “Hasport EGWK K Swap Conversion Wiring Harness fits 92-95 Honda Civic / Integra” is in sale since Friday, February 22, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “valexracing” and is located in Elk Grove Village, Illinois. This item can be shipped worldwide.
  • Brand: Hasport
  • Manufacturer Part Number: EGWK

Hasport EGWK K Swap Conversion Wiring Harness fits 92-95 Honda Civic / Integra
Hasport_EGWK_K_Swap_Conversion_Wiring_Harness_fits_92_95_Honda_Civic_Integra_01_pnk Tagged: , , , , , , , , , , .

Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747

Posted on by
Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747
Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747
Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747
Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747

Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747
Each new harness contains in depth application specific instruction sheets, Clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding and pre-fitted corrugated slit loom for an extra value & professional look, Standard length harness are 54 from the back of the engine to the PCM connectors, Made in the USA. Has connections for 700R4 transmission. Common aftermarket fuel pump and fan relays are included. These harnesses feature all of the connection points necessary to run the engine and transmission if applicable. The emission equipment has been eliminated and only the needed connections to run the engine and transmission are incorporated. Standard length harnesses are 54 from the back of the engine to the PCM connectors. Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible. Made from premium grade GXL jacketed automotive wire. Most wiring is larger gauge than stock application for durability. No splices to reduce points of failure. All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping. Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification. All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks. Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation. OBD1 diagnostic port for connection to scanners and tuning tools. Made in the USA. A very nice and well build harness for The TBI engine. By Saganhill on September 30, 2018. We have used two of these harnesses on two Jeep YJ engine swaps. We use engines from 1992. One jeep was an Auto and the other a 5 speed manual. Very easy to connect. The hardest part was finding a place inside the Jeep tub to put the ECM. Behind the glove box worked best. Yes, I recommend this product. Have not installed yet. By mike on March 14, 2018. Very cool and good quality kit. By nocents64 on January 05, 2018. Want another for my 57 chevy. By nocents64 on December 28, 2017. Getting ready to order another kit for my 57 chevy. By Johnny on October 17, 2017. Used for a tbi engine swap into older truck. Made the swap simple. Related Items / Suggested Parts. Rubber Grommet and Plug Set, 125-Piece Assortment. Speedway 1985-89 Tuned Port Mass Air Engine Harness. Speedway 1999-04 Corvette LS Conversion Wiring Harness. Speedway GM Engine Wiring Harness, 1999-02 LS1. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 68 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747″ is in sale since Wednesday, September 4, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Brand: Speedway Motors
  • Manufacturer Part Number: 91008592
  • California Prop 65 Warning: True
  • CarbType-Feed: No

Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747
Speedway_85_92_Chevy_TBI_Swap_Fuel_Injection_EFI_Engine_Wiring_Harness_7747_8747_01_oxd Tagged: , , , , , , , , .

1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans

Posted on by
1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans
1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans
1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans
1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans
StandAlone Swap Harness designed for. Engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory VORTEC intake manifold and Multec injectors. This Standalone is a Plug n’ Play design with 3-wire hook-ups (switched power, constant power & ground connections minimum required to start engine). Includes Detailed Installation Guide for Plug n’ Play Ease. All Engine & Transmission Sensor Connectors. ATO Style Fuse Block. Switched Power Ignition Relay. TCC / Switch Wiring. Chevy, GMC, Cadillac & Hummer VORTEC engines with electronic throttle body & 4L80E transmissions. These Standalones are designed with a sliding grommet seal & 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. The item “1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans” is in sale since Wednesday, December 18, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “ampmotorsport” and is located in Altamonte Springs, Florida. This item can be shipped worldwide.
  • Superseded Part Number: LS_4L80E_999DBW-SWAP
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Manufacturer Part Number: AmpLS_4L80E_999DBW
  • Other Part Number: LS_4L80E_999DBW
  • Brand: AmpMoto
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No
  • Warranty: 60 Day

1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans
1999_2006_DBW_LS1_Standalone_Wiring_Harness_Swap_4L80E_Trans_01_ywco Tagged: , , , , , , .

Speedway Motors 85-89 Chevy TPI Tuned Port Mass Air Engine Swap Wiring Harness

Posted on by
Speedway Motors 85-89 Chevy TPI Tuned Port Mass Air Engine Swap Wiring Harness
Speedway Motors 85-89 Chevy TPI Tuned Port Mass Air Engine Swap Wiring Harness
Speedway Motors 85-89 Chevy TPI Tuned Port Mass Air Engine Swap Wiring Harness
Speedway Motors 85-89 Chevy TPI Tuned Port Mass Air Engine Swap Wiring Harness

Speedway Motors 85-89 Chevy TPI Tuned Port Mass Air Engine Swap Wiring Harness
Each new harness contains in depth application specific instruction sheets, Clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding and pre-fitted corrugated slit loom for an extra value & professional look, Standard length harness are 54 from the back of the engine to the PCM connectors, Made in the USA. Speedway 1985-89 Tuned Port Mass Air Engine Harness. Has connections for 700R4 transmission. Common aftermarket fuel pump relay is included. These harnesses feature all of the connection points necessary to run the engine and transmission if applicable. The emission equipment has been eliminated and only the needed connections to run the engine and transmission are incorporated. Harnesses are 54 from the back of the engine to the PCM connectors. Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible. Made from premium grade GXL jacketed automotive wire. Most wiring is larger gauge than stock application for durability. No splices to reduce points of failure. All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping. Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification. All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks. OBD1 diagnostic port for connection to scanners and tuning tools. Made in the USA. Awsome product , highly impressed. By curly the mechanic on June 09, 2012. I put this engine into an 84 chevy truck. Made it easy to get going. Yes, I recommend this product. Perfect fit, great looks. By buster on January 05, 2011. Great fit, great looks, great price. Related Items / Suggested Parts. Speedway 1999-04 Corvette LS Conversion Wiring Harness. Speedway GM Engine Wiring Harness, 1999-02 LS1. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 67 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway Motors 85-89 Chevy TPI Tuned Port Mass Air Engine Swap Wiring Harness” is in sale since Monday, September 23, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Brand: Speedway Motors
  • Manufacturer Part Number: 91008589
  • California Prop 65 Warning: True

Speedway Motors 85-89 Chevy TPI Tuned Port Mass Air Engine Swap Wiring Harness
Speedway_Motors_85_89_Chevy_TPI_Tuned_Port_Mass_Air_Engine_Swap_Wiring_Harness_01_hlwh Tagged: , , , , , , , , , , .

Ls Standalone Harness 101 Beginners Guide How To Wire A Ls Swap Hotrod Engine

Posted on by
Ls_Standalone_Harness_101_Beginners_Guide_How_To_Wire_A_Ls_Swap_Hotrod_Engine_01_qnrq Tagged: , , , , , , , .

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator

Posted on by
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW N54 wiring harness adapter. With CAN-BUS emulator and. This Wiring Harness Adapter was developed to allow the installation / swap of an N54 engine with the original engine ECU, into any other BMW car. N54 is a Twin Turbo engine and is available on E90/E91/E92/E93, E60/E61, E82/E88 or E89. This Wiring Adapter is very easy to install. It is a plug and play solution. It is also included an OBD2 plug that you can use with your OBD tool to see live data, fault codes or even flash your ECU. You will find all the information needed and photos on the installation procedure included in this sale. This swap solution with this CAN BUS emulator was tested on a Dyno to make sure there is no power loss, the engine does not enter safe mode. The Engine ECU will store many fault codes due to a no CAN communication with all the others ECU´s (ABS, airbag, cluster, etc), so, we developed this CAN Emulator to simulate all the other e90´s ECU as well as the Junction Box to allow you to do diagnose, without our emulator you will not be able. So, Instead of having more than 20 fault codes, you will only have 5 faults codes. These are not possible to simulate. If you want you can delete these on the memory of the engine ECU with a help of a Chiptuner. The List of the fault codes are available on the instructions procedure. It is only possible to check the engine oil level using an e90´s cluster or diagnostic tool. However we developed on our emulator box a LED to allow you to check if the oil level is ok or not. To use our wiring harness adapter you must have from the new engine, the following SET/parts. Electronic gas pedal. Ignition key reader and the cable to CAS Module. All the wiring/plugs, related to the engine. We have a complete guide to help you removing all the wiring needed for this project. This type of engine ECU is not possible to delete EWS/IMMO. So, you must get CAS and key from the donor car. This product was developed using a N54B30 engine with MSD80 engine ECU, with manual transmission. Our wiring harness for N54 engine will be plug & play on your BMW E30 or E36, please inform us which car you have. Using our Kit all the information on your E30 or E36 cluster will work as stock. To build our wiring harness adaptors, we only use new electric components, original and high quality. We Speak English, Portuguese, French and German. Most items will be sent within 24 hours. Please check out our feedback! VAT invoice: all our items include a VAT invoice supplied with the goods. Please tell us your VAT number for correct invoice. The item “BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator” is in sale since Tuesday, April 9, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “bruno_steering” and is located in Leiria. This item can be shipped worldwide.
  • Non-Domestic Product: No
  • BMW Swap old: BMW Swap old
  • Manufacturer Part Number: BLA015
  • Modified Item: No
  • Custom Bundle: No
  • Reference OE/OEM Number: BMWswap
  • Other Part Number: Swap E46
  • Brand: ANT Steering & Electronics

BMW Swap Convert N54 engine E90 E60 Harness/Wiring Adapter with CAN-BUS emulator
BMW_Swap_Convert_N54_engine_E90_E60_Harness_Wiring_Adapter_with_CAN_BUS_emulator_01_yfsw Tagged: , , , , , , .

LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C

Posted on by
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C

LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
This harness has a blue/green connector for drive by wire. The harness is setup to run 4l60e transmissions. I have removed all of the emission and evap items. The harness retains all of the needed A/C connections. An OBD2 port and check engine light have been added and 5 feet extra length to both items. A fuse block has been added with the needed fuses and relays provided. You need only three wires for the engine to run with this harness, battery 12V+, Keyed 12V+, and a lead wire to your fuel pump. The harness has been rewrapped in fresh wire loom. If you have any other questions let me know. Check out my other listing. I provided a harness service if you have your own harness and need it to be standalone. As well I do harness made to order if you want a specific standalone harness. Thanks for viewing and talk to you soon! The item “LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C” is in sale since Saturday, April 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “javonta91″ and is located in Orlando, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Aruba, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
  • Brand: Unbranded

LS Harness Swap Standalone 4.8 5.3 6.0 Drive By Wire 4L60E A/C
LS_Harness_Swap_Standalone_4_8_5_3_6_0_Drive_By_Wire_4L60E_A_C_01_vuao Tagged: , , , , , .