Wire Wiring Harness

American Autowire 500434 1957 Chevy Car Classic Update Wiring Harness

Posted on by
American Autowire 500434 1957 Chevy Car Classic Update Wiring Harness
American Autowire 500434 1957 Chevy Car Classic Update Wiring Harness
American Autowire 500434 1957 Chevy Car Classic Update Wiring Harness
American Autowire 500434 1957 Chevy Car Classic Update Wiring Harness

American Autowire 500434 1957 Chevy Car Classic Update Wiring Harness
1957 Chevy Car Classic Update Wiring Harness Kit. American Autowire Part Number: 500434 Yogi’s Part Number: AAW500434. This Item is In Stock in our Monticello, Iowa warehouse. This Classic Update Series wiring kit from American Autowire is for the 1957 Chevy. It includes the following features. Original headlight bucket grommets, parking light weatherproof boot, tube assemblies, and light sockets are included. Extra long leads are supplied for custom routing. Accessory disconnect provided for connections to power windows, power seats, cruise control, fuel pump, power door locks, extra radio (CB), or optional power accessory. New floor dimmer switch is provided. Wire length and connection accommodate original floor mounted dimmer switch. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box and custom mounting plate are designed for bolt-on, under dash installation. All required hardware supplied. Steering column connectors will plug directly into most aftermarket steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches. The original column can also be wired by using the supplied mating connector and terminals. Heater control panel lighting, power, and blower motor leads are included for original style heaters as well as aftermarket heat and AC updates. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. All original terminals, connectors, and light sockets are also supplied for original cluster gauges. Replacement headlight switch with internal circuit breaker, retention collar nut, adjustable length shaft, custom knob, extra connectors, and instructions are included. Original design rear body weatherproof boot and tube assemblies and original design light sockets make attachment to original or reproduction tail light assemblies an easy plug-in. Rear body harness assembly is designed to plug into the main harness in the original under dash position utilizing existing retention clips. License plate connectors and terminals included. Fuel tank sender wire and terminal included. Special terminals included for original. New ignition switch is included with indexed connector. Additional connectors and instructions are provided to use the original 1955-56 and 1957 ignition switches, original style door jamb switches, and overhead dome light. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Engine wiring includes connectors for points type and HEI distributors. Power and tach connectors supplied for GM HEI distributors. Alternator connectors are supplied for GM SI series internal regulator and one wire alternators. Engine wiring includes starter and gauge sender leads for water temp, oil pressure, and tach. Heavy 8 gauge alternator leads are supplied. Power circuits are fusible link protected. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “American Autowire 500434 1957 Chevy Car Classic Update Wiring Harness” is in sale since Friday, September 5, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam, China, Barbados, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Martinique, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Uruguay.
  • Manufacturer Part Number: 500434
  • Other Part Number: AAW500434
  • Warranty: Yes
  • Part Brand: American Autowire
  • Country of Manufacture: United States

American Autowire 500434 1957 Chevy Car Classic Update Wiring Harness
American_Autowire_500434_1957_Chevy_Car_Classic_Update_Wiring_Harness_01_xrrr Tagged: , , , , , , .

1979-80 Pontiac Firebird Classic Update Wiring Harness Complete Kit 510689

Posted on by
1979-80 Pontiac Firebird Classic Update Wiring Harness Complete Kit 510689

1979-80 Pontiac Firebird Classic Update Wiring Harness Complete Kit 510689
Classic Complete Wiring Harness Update Kit. The Classic Update Series gives you the most complete kits on the market to Make Wiring THAT Easy. They are designed for specific year, make, and model configurations. The 19791980 Pontiac Firebird Classic Update Kit is no exception. The kit boasts 13 features making it the most complete system of its type in the industry including: A replacement headlight switch with internal 30amp circuit breaker, retention collar nut, adjustable length shaft, and custom knob. Standard turn signal and hazard flashers are mounted on fuse panel. A new horn relay is mounted on the main dash harness. Fuse box designed to fit in original location with no modifications. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all aftermarket accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies – an American Autowire exclusive feature Steering column connectors can plug directly into many aftermarket steering columns or stock 1977-80 GM columns that use stock GM turn signal switches. Complete factory heater harness assembly included. Separate under dash courtesy lamps for use along with your original dome/interior lighting. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. Original terminals and PC board connector (another American Autowire exclusive) are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, VDO and others. Rear body harness assembly plugs into the main harness in the stock location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes complete backup light leads with correct lamp sockets, complete stop and tail light leads with correct lamp sockets, complete turn signal leads with correct lamp sockets, complete rear side marker leads with correct long focal length molded lamp sockets, complete license plate lead connection to plug into your lamps, and fuel tank sender wire with trunk grommet and tank connection. GM bulkhead connectors for the engine and front light wiring are included (another American Autowire exclusive) and allow for easy installation with original or custom routing. Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra-long leads that can be routed for stock or optional appearances. All headlight connectors and terminals, parking and directional light leads and lamp sockets, and side marker leads and lamp sockets are provided along with a switched trigger wire for an electric fan relay (usually recommended with AC). All the various connectors and terminals for your wiper/washer system are provided. Per California Law (Prop 65) we are required to put the following warning on all our listings. Please verify that the description contains your specific vehicle. While eBays compatibility system does a good job, it sometimes lists sub-models that may or may not be compatible with the part being offered. We have a 70,000 square ware house; so chances are we do have your item in stock and ready to go. Sorry for any inconvenience. This excludes special order items and electrical items. Powered by SixBit’s eCommerce Solution. The item “1979-80 Pontiac Firebird Classic Update Wiring Harness Complete Kit 510689″ is in sale since Friday, June 2, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “thepartsplaceinc” and is located in DeKalb, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Brand: American Autowire
  • Manufacturer Part Number: 510689
  • Other Part Number: WH1237F
  • Quantity: 1

1979-80 Pontiac Firebird Classic Update Wiring Harness Complete Kit 510689
Tagged: , , , , , , , .

1969 Ford Mustang Wiring kit 69 Classic Update Wiring Harness Series mach1 boss

Posted on by
1969 Ford Mustang Wiring kit 69 Classic Update Wiring Harness Series mach1 boss

1969 Ford Mustang Wiring kit 69 Classic Update Wiring Harness Series mach1 boss
PERFECT FOR WHEN BUILDING A RESTOMOD. CLASSIC UPDATE SERIES WIRING HARNESS SYSTEM, Manufactured specifically for 1969 models. Designed with the foresight, engineering, and flexibility to bring your electrical system up to date. Choose the routing of the wiring to fit your needs and accommodate all of the most popular custom/aftermarket and reproduction/original accessories available!!!! Includes many of the vehicle’s basic electrical devices and detailed instructions!!! Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered Halogen headlights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. New ATO Fusebox fits in center of the firewall away from heater and A/C ducts and allows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for running a stock Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead wires with proper molded light socket connections, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “1969 Ford Mustang Wiring kit 69 Classic Update Wiring Harness Series mach1 boss” is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.
  • Warranty: No

1969 Ford Mustang Wiring kit 69 Classic Update Wiring Harness Series mach1 boss
Tagged: , , , , , , , , .

57 Chevy Wiring kit Classic Update Wiring Harness Series 1957 bel air 210 150

Posted on by
57 Chevy Wiring kit Classic Update Wiring Harness Series 1957 bel air 210 150

57 Chevy Wiring kit Classic Update Wiring Harness Series 1957 bel air 210 150
PERFECT FOR WHEN BUILDING A RESTOMOD. CLASSIC UPDATE SERIES WIRING HARNESS SYSTEM, Manufactured specifically for 1957 models. Designed with the foresight, engineering, and flexibility to bring your electrical system up to date. Choose the routing of the wiring to fit your needs and accommodate all of the most popular custom/aftermarket and reproduction/original accessories available!!!! Includes many of the vehicle’s basic electrical devices and detailed instructions!!! WHAT IS THIS PART? For those of you who think Chevrolet left room for improvement, we offer our Classic Update Series Wiring Harness Systems (For customized cars & trucks). This is the simplest way to update your classic car’s wiring. In basic terms, this system allows you to rewire your car or truck with the customized upgrades you want installed. Upgrades may include: newer steering column, H. Alternator, aftermarket heater & A/C system, reproduction tail light assembly, updated gauges, etc. This system has been designed with the power capabilities necessary to run separate options. Note: Some of these options may include power windows, stereo systems, air conditioning, computerized fuel injection / ignition system, ABS / ride control, other computerized systems, etc. Wiring for these types of options are not provided with the Custom Update system. Our “Classic Update Series Wiring Systems” are not a fits-all system. They are custom manufactured for a specific year & model vehicle. They are a complete car wiring system, designed with the foresight, engineering and flexibility to bring your car’s electrical system up-to-date. When you install this system, you will determine the routing of the wires to fit your needs. /NOTES Take a look at all the great items that are included in the “1957 Chevy Custom Update Series Wiring System”. A New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. B Original headlight bucket grommets, parking light weatherproof boot, and tube assemblies and light sockets are included for 1955-’56. Original parking light bar components supplied for 1957. Extra long leads are supplied for custom routing. C Accessory disconnect provided for connections to power windows, power seats, cruise control, fuel pump, power door locks, extra radio (CB) or optional power accessory. D Replacement headlight switch with internal circuit breaker included. Also included are retention collar nut, adjustable length shaft, custom knob, extra connectors and instructions. E Original design rear body weatherproof boot and tube assemblies and original design light sockets make attachment to original or reproduction tail light assemblies an easy plug-in. Lead wires are long enough to accommodate all body styles (including wagons). Even custom applications require these assemblies for weather protection! F Rear body harness assembly is designed to plug into the main harness in the original under dash position utilizing existing retention clips. Flexibility in harness design allows for original or custom routing. Both 2 & 4 door models are accommodated. Rear body wiring includes backup light wires and mating connectors for backup light assemblies. License plate connectors and terminals included. Fuel tank sender wire and terminal included. Special terminals included for original style door jamb switches and overhead dome light. G New ignition switch is included with indexed connector. Additional connectors and instructions are provided to use the original 1955-’56 and 1957 ignition switches. H Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light and directional light connectors and terminals are provided, as well as wiring for electric engine fan (usually recommended with AC). I Engine wiring includes connectors for points-type and H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM “SI” series internal regulator and “one wire” alternators. J Engine wiring includes starter and gauge sender leads for water temp, oil pressure, and tach. Heavy 8 gauge alternator leads are supplied. Power circuits are fusible link protected. K Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. All original terminals, connectors, and light sockets are also supplied for original cluster gauges. However, the best aspect to the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes Autometer, Classic Instruments, Dakota Digital, Stewart Warner, and VDO, just to name a few. L Heater control panel lighting, power, and blower motor leads are included for original style heaters as well as after market heat and AC updates such as Hotrod Air, and Vintage Air, etc. Connections are also wired-in for the glove box, cigarette lighter and even the original clock in the passenger side dash bezel. M Steering column connectors will plug directly into most aftermarket steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches. The original column can also be wired by using the supplied mating connector and terminals. N Fuse block and custom mounting plate are designed for bolt-on, under dash installation. All required hardware are supplied. Location selected for easy accessibility and clearance of under dash accessories such as Autometer, Classic Industries, Dakota Digital, Stewart Warner and VDO gauge systems, Raingear wiper systems, Hot Rod Air and Vintage Air heat and air conditioning systems, Flaming River, Ididit and original GM tilt steering columns. O Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse block. NOTE: This kit will not support an ammeter. You must convert your ammeter to a voltmeter, or use an aftermarket voltmeter. This kit only supports a self-exciting (1-wire) alternator or GM SI internally-regulated alternator. This “Classic Update Series” Wiring System should ONLY be used if you are building a custom, retro-mod / retro-rod type of vehicle. It is designed for that purpose. If your goal is to restore, or keep, your vehicle to a factory-original configuration, we highly recommend our “Original Design Series” wiring harnesses. Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “57 Chevy Wiring kit Classic Update Wiring Harness Series 1957 bel air 210 150″ is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.
  • Warranty: No

57 Chevy Wiring kit Classic Update Wiring Harness Series 1957 bel air 210 150
Tagged: , , , , , .

1973-82 Chevy Truck Classic Update Wiring Harness Complete Kit 510347

Posted on by
1973-82 Chevy Truck Classic Update Wiring Harness Complete Kit 510347

1973-82 Chevy Truck Classic Update Wiring Harness Complete Kit 510347
Classic Wiring Harness Complete Update. A replacement headlight switch with internal 25-amp circuit breaker, adjustable length shaft, and custom knob. Standard turn signal flasher, hazard flasher, and horn relay mounted on harness. Fuse box designed to fit in original location with no mods to the firewall. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Steering column connectors can plug directly into most aftermarket steering columns or stock 1975 and up GM columns. Can also be mated to earlier columns using the adapter and terminals included in the kit. Separate under dash courtesy lamp assemblies are also included for use along with your original dome/interior lighting feeds. Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. Original terminals and connector that will plug into the original gauge cluster (another American Autowire exclusive) are provided. The system will also connect into most popular aftermarket gauges such as DAKOTA DIGITAL, CLASSIC INSTRUMENTS, AUTOMETER, VDO, and others. Rear body harness assembly plugs into the main harness at the main bulkhead disconnect location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes backup light lead wires and connectors along with stop and tail light lead wires and connectors. License plate lamp lead connection, as well as the fuel tank sender lead connection is also included. Original style lamp sockets and side markers for fleet side and original style molded connections for step side rear lamps are included. New floor dimmer switch is provided for ease of installation. Wire length and connection accommodate original floor mount dimmer switch. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, electric choke, and electric speedometer (if needed). A heavy gauge alternator feed and fusible link are also included for any typical high output 1 wire or internally regulated alternator. Connectors supplied for power and tach leads for GM style H. Distributors along with various oil and temp senders. Front lighting includes extra long leads that can be routed for stock or optional appearances. All head light, parking light, and directional light leads, along with a switched trigger wire for an electric fan relay (usually recommended with AC) are provided. Mating terminals and connectors are also provided for you to complete your custom installation. New parking lamp socket and side marker lamp sockets are also included. Fits 1973-82 C10 / C20 / C30 /K10 / K20 / K30. Per California Law (Prop 65) we are required to put the following warning on all our listings. Please verify that the description contains your specific vehicle. While eBays compatibility system does a good job, it sometimes lists sub-models that may or may not be compatible with the part being offered. We have a 70,000 square ware house; so chances are we do have your item in stock and ready to go. Sorry for any inconvenience. This excludes special order items and electrical items. Powered by SixBit’s eCommerce Solution. The item “1973-82 Chevy Truck Classic Update Wiring Harness Complete Kit 510347″ is in sale since Tuesday, August 11, 2015. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “thepartsplaceinc” and is located in DeKalb, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Brand: American Autowire
  • Manufacturer Part Number: 510347
  • Other Part Number: WH1250K

1973-82 Chevy Truck Classic Update Wiring Harness Complete Kit 510347
Tagged: , , , , , , , .

1955-59 Chevy Truck American Autowire Classic Update Wiring Harness #500481

Posted on by
1955-59 Chevy Truck American Autowire Classic Update Wiring Harness #500481

1955-59 Chevy Truck American Autowire Classic Update Wiring Harness #500481
Brand new American Autowire Classic Update Series Wiring Harness Kit. Accessory disconnect provided for connections to power windows, power seats, cruise control, fuel pump, power door locks, extra radio (CB), or optional power accessory. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box and custom mounting plate are designed for bolt-in under dash installation. All required hardware supplied. Location selected for easy accessibility and clearance of under dash accessories such as all gauge packages, wiper systems, heating and air conditioning systems, and stock original or aftermarket GM tilt steering columns. Original dome light wiring as well as additional door jamb switches and under dash lighting are provided. Steering column connectors will plug directly into most aftermarket steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches. The original column can also be wired by using the supplied mating connector and terminals. Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. All original terminals, connectors, and light sockets are also supplied for original cluster gauges. However, the best aspect to the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO, just to name a few. Heater control panel lighting, power, and blower motor leads are included for original style heaters as well as aftermarket heat and AC updates such as HOTROD AIR, VINTAGE AIR, etc. Connections are also wired in for the glove box and cigarette lighter. Replacement headlight switch with internal circuit breaker included. Retention collar nut, adjustable length shaft, and custom knob are also included. Extra connectors and instructions are supplied for installation of original headlight switches. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Rear body harness assembly is designed to plug into the main harness in the original position utilizing existing retainers. Flexibility in harness design allows for original or custom routing. Rear body wiring includes backup light wires and mating connectors for backup light leads. License plate lead, connectors, and terminals included. Fuel tank sender wire and terminal included. Leads and terminals included for jamb switches and dome light. Engine wiring includes connectors for points type and H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM “SI” series internal regulated and all “one wire”alternators. GM “CS” series alternator connector available separately. Engine wiring includes starter and gauge sender leads for water temp, oil pressure, voltmeter, and tach. Heavy 8 gauge alternator leads are supplied. Power circuits are fusible link protected. New ignition switch is included. Additional connectors and instructions are provided to use the original ignition switch or column mounted ignition switch. Color schematics and easy to understand installation instructions included. The item “1955-59 Chevy Truck American Autowire Classic Update Wiring Harness #500481″ is in sale since Tuesday, May 3, 2016. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “supermuscleparts” and is located in Bellmawr, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Brand: American Autowire
  • Manufacturer Part Number: 500481
  • Other Part Number: dash harness forward lamp harness tail lamp harnes
  • Warranty: Yes
  • Country/Region of Manufacture: United States

1955-59 Chevy Truck American Autowire Classic Update Wiring Harness #500481
Tagged: , , , , , , , , .

55 56 Chevy Wiring kit Classic Update Wiring Harness Series bel air 210 150

Posted on by
55 56 Chevy Wiring kit Classic Update Wiring Harness Series bel air 210 150

55 56 Chevy Wiring kit Classic Update Wiring Harness Series bel air 210 150
PERFECT FOR WHEN BUILDING A RESTOMOD. CLASSIC UPDATE SERIES WIRING HARNESS SYSTEM, Manufactured specifically for 1955-56 models. Designed with the foresight, engineering, and flexibility to bring your electrical system up to date. Choose the routing of the wiring to fit your needs and accommodate all of the most popular custom/aftermarket and reproduction/original accessories available!!!! Includes many of the vehicle’s basic electrical devices and detailed instructions!! WHAT IS THIS PART? For those of you who think Chevrolet left room for improvement, we offer our Classic Update Series Wiring Harness Systems (For customized cars & trucks). This is the simplest way to update your classic car’s wiring. In basic terms, this system allows you to rewire your car or truck with the customized upgrades you want installed. Upgrades may include: newer steering column, H. Alternator, aftermarket heater & A/C system, reproduction tail light assembly, updated gauges, etc. This system has been designed with the power capabilities necessary to run separate options. Note: Some of these options may include power windows, stereo systems, air conditioning, computerized fuel injection / ignition system, ABS / ride control, other computerized systems, etc. Wiring for these types of options are not provided with the Custom Update system. Our “Classic Update Series Wiring Systems” are not a fits-all system. They are custom manufactured for a specific year & model vehicle. They are a complete car wiring system, designed with the foresight, engineering and flexibility to bring your car’s electrical system up-to-date. When you install this system, you will determine the routing of the wires to fit your needs. /NOTES Take a look at all the great items that are included in the “1957 Chevy Classic Update Series Wiring System”. A New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. B Original headlight bucket grommets, parking light weatherproof boot, and tube assemblies and light sockets are included for 1955-’56. Original parking light bar components supplied for 1957. Extra long leads are supplied for custom routing. C Accessory disconnect provided for connections to power windows, power seats, cruise control, fuel pump, power door locks, extra radio (CB) or optional power accessory. D Replacement headlight switch with internal circuit breaker included. Also included are retention collar nut, adjustable length shaft, custom knob, extra connectors and instructions. E Original design rear body weatherproof boot and tube assemblies and original design light sockets make attachment to original or reproduction tail light assemblies an easy plug-in. Lead wires are long enough to accommodate all body styles (including wagons). Even custom applications require these assemblies for weather protection! F Rear body harness assembly is designed to plug into the main harness in the original under dash position utilizing existing retention clips. Flexibility in harness design allows for original or custom routing. Both 2 & 4 door models are accommodated. Rear body wiring includes backup light wires and mating connectors for backup light assemblies. License plate connectors and terminals included. Fuel tank sender wire and terminal included. Special terminals included for original style door jamb switches and overhead dome light. G New ignition switch is included with indexed connector. Additional connectors and instructions are provided to use the original 1955-’56 and 1957 ignition switches. H Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light and directional light connectors and terminals are provided, as well as wiring for electric engine fan (usually recommended with AC). I Engine wiring includes connectors for points-type and H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM “SI” series internal regulator and “one wire” alternators. J Engine wiring includes starter and gauge sender leads for water temp, oil pressure, and tach. Heavy 8 gauge alternator leads are supplied. Power circuits are fusible link protected. K Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. All original terminals, connectors, and light sockets are also supplied for original cluster gauges. However, the best aspect to the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes Autometer, Classic Instruments, Dakota Digital, Stewart Warner, and VDO, just to name a few. L Heater control panel lighting, power, and blower motor leads are included for original style heaters as well as after market heat and AC updates such as Hotrod Air, and Vintage Air, etc. Connections are also wired-in for the glove box, cigarette lighter and even the original clock in the passenger side dash bezel. M Steering column connectors will plug directly into most aftermarket steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches. The original column can also be wired by using the supplied mating connector and terminals. N Fuse block and custom mounting plate are designed for bolt-on, under dash installation. All required hardware are supplied. Location selected for easy accessibility and clearance of under dash accessories such as Autometer, Classic Industries, Dakota Digital, Stewart Warner and VDO gauge systems, Raingear wiper systems, Hot Rod Air and Vintage Air heat and air conditioning systems, Flaming River, Ididit and original GM tilt steering columns. O Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse block. NOTE: This kit will not support an ammeter. You must convert your ammeter to a voltmeter, or use an aftermarket voltmeter. This kit only supports a self-exciting (1-wire) alternator or GM SI internally-regulated alternator. This “Classic Update Series” Wiring System should ONLY be used if you are building a custom, retro-mod / retro-rod type of vehicle. It is designed for that purpose. If your goal is to restore, or keep, your vehicle to a factory-original configuration, we highly recommend our “Original Design Series” wiring harnesses. Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “55 56 Chevy Wiring kit Classic Update Wiring Harness Series bel air 210 150″ is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.
  • Warranty: No

55 56 Chevy Wiring kit Classic Update Wiring Harness Series bel air 210 150
Tagged: , , , , , .

1969 1970 1971 1972 Nova Chevy II Wiring Harness Classic Update Kit

Posted on by
1969 1970 1971 1972 Nova Chevy II Wiring Harness Classic Update Kit

1969 1970 1971 1972 Nova Chevy II Wiring Harness Classic Update Kit
Manufactured in the USA by American Auto Wire. This wiring harness kit has everything to wire your car front to rear. Most complete wiring harness kit on the market. Here are some details about the Classic Update Wiring Harness Kit. Replacement headlight switch with internal 30 amp circuit breaker included. Retention collar nut, adjustable length shaft, and custom knob are also included. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box designed to fit in original location. All required hardware supplied. New ATO fuse allows easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all aftermarket accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies! (Exclusive to American Autowire) 5. Steering column connectors will plug directly into most aftermarket steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches. The original column can also be wired by using the supplied mating connector and terminals. Original Dash Panel instrument Cluster Connector. Along with wiring for your original dome/interior lighting, we have included separate underdash light sockets. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. All original terminals, connectors (exclusively from American Autowire), and light sockets are also supplied for original cluster gauges. However, the best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, COVAN CLASSICS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly is designed to plug into the main harness in the original connector bodies. Flexibility in harness design allows for original or custom routing. Rear body wiring includes backup light wires and mating connectors for backup light leads. License plate lead, connectors, and terminals included. Fuel tank sender wire and terminal included. Youll find all the original style light socket pigtails packed into every aspect of this system making it the most complete system of its type in the industry! New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. Original bulkhead connector for the engine and front light wiring is included and ready for installation. Original routing of the new harness without any body modifications! Engine wiring includes connectors for original points type as well as H. Power and tach connectors are supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Be sure to add me to your favorites list! Thanks for visiting and hope to have your business. The free listing tool. Per California Prop 65 Law we are required to put the following warning on all our listings. This product can expose you to a chemical known to the state of California to cause cancer or reproductive harm. The item “1969 1970 1971 1972 Nova Chevy II Wiring Harness Classic Update Kit” is in sale since Thursday, October 18, 2012. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “24kaccents” and is located in Niagara Falls, New York. This item can be shipped worldwide.
  • Surface Finish: Wiring Harness Kit
  • Brand: AAW
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: 500878

1969 1970 1971 1972 Nova Chevy II Wiring Harness Classic Update Kit
Tagged: , , , , , .

American Autowire 510372 1966-68 Chevy Impala Classic Update Wiring Harness

Posted on by
American Autowire 510372 1966-68 Chevy Impala Classic Update Wiring Harness

American Autowire 510372 1966-68 Chevy Impala Classic Update Wiring Harness
American Autowire Classic Update Wiring Kit – 1966-68 Impala. This Item is In Stock in our Monticello, Iowa Warehouse. American Autowire Part Number: 510372 Yogi’s Inc. 1966-68 Impala Classic Update Series Complete Wiring Kit. A replacement headlight switch with internal 30 amp circuit breaker, retention collar nut, adjustable length shaft, and custom knob. Standard turn signal and hazard flashers are mounted on fuse panel. A new horn relay is mounted on the main dash harness. Fuse box designed to fit in original location with mods to the firewall, template included. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies – an American Autowire exclusive feature. Steering column connectors can plug directly into most aftermarket steering columns or stock 1965 GM columns that use stock GM turn signal switches. Separate under dash courtesy lamps for use along with your original dome/interior lighting. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. Original terminals and connectors (another American Autowire exclusive) are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as AUTOMETER, CLASSIC INSTRUMENTS, STEWART WARNER, VDO, and others. Rear body harness assembly plugs into the main harness in the stock location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes backup light lead wires with correct lamp sockets or connectors, stop and tail light lead wires with correct lamp sockets, terminals, connectors and lamp sockets to mate with the license plate lamp, and fuel tank sender wire with trunk grommet and tank connection. New trunk lid harness that is assembled complete with correct protective loom, tail lamp sockets, and trunk lamp power feed. New floor dimmer switch is provided for ease of installation. Wire length and connection accommodate original floor mount dimmer switch. GM bulkhead connectors for the engine and front light wiring are included (another American Autowire exclusive) and allow for easy installation with original or custom routing. Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra long leads that can be routed for stock or optional appearances. All headlight, parking light, and directional light connectors and terminals are provided along with a switched trigger wire for an electric fan relay (usually recommended with AC). Original style light sockets, switch body connectors, terminals, etc. New ignition switch with indexed connector included. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “American Autowire 510372 1966-68 Chevy Impala Classic Update Wiring Harness” is in sale since Monday, July 14, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Manufacturer Part Number: 510372
  • Other Part Number: AAW510372
  • Warranty: Yes
  • Part Brand: American Autowire
  • Country of Manufacture: United States

American Autowire 510372 1966-68 Chevy Impala Classic Update Wiring Harness
Tagged: , , , , , , , , .

American Autowire 510063 1961-64 Chevy Impala Classic Update Wiring Harness

Posted on by
American Autowire 510063 1961-64 Chevy Impala Classic Update Wiring Harness
American Autowire 510063 1961-64 Chevy Impala Classic Update Wiring Harness
American Autowire 510063 1961-64 Chevy Impala Classic Update Wiring Harness
American Autowire 510063 1961-64 Chevy Impala Classic Update Wiring Harness

American Autowire 510063 1961-64 Chevy Impala Classic Update Wiring Harness
1961 – 1964 Impala Classic Update Wiring Harness Kit. American Autowire Part Number: 510063 Yogi’s Part Number: AAW510063. This Item is In Stock in Our Iowa Warehouse. This Classic Update Series wiring kit from American Autowire is for the 1961 – 1964 Impala. It includes the following features. Eplacement headlight switch with internal 30 amp circuit breaker included. Retention collar nut, adjustable length shaft, and custom knob are also included. Standard turn signal flasher, hazard flasher mounted on fuse panel, and horn relay mounted on harness. Fuse box designed to fit in original location. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market. Along with wiring for your original dome/interior lighting we have included separate under dash light sockets. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. All original terminals, connectors (exclusively from American Autowire), and light sockets are also supplied for original cluster gauges. However, the best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly is designed to plug into the main harness in the original location. Flexibility in harness design allows for original or custom routing. Rear body wiring includes backup light lead wires with correct light sockets, stop and tail light lead wires with correct light sockets, license plate lead wires, and fuel tank sender wire and connection. In addition, a complete preassembled trunk lid harness is also included at no extra charge! New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. GM bulkhead connectors for the engine and front light wiring are included and ready for easy installation. Original or custom routing of the new harness is no problem! Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). You will find that with our inclusion all the original style light sockets, connectors, terminals, etc. Packed into every aspect of this harness, it makes it the most complete system of its type in the industry. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “American Autowire 510063 1961-64 Chevy Impala Classic Update Wiring Harness” is in sale since Monday, September 15, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
  • Part Brand: American Autowire
  • Country of Manufacture: United States
  • Interchange Part Number: 510063
  • Manufacturer Part Number: 510063
  • Other Part Number: AAW510063
  • Brand: American Autowire
  • Warranty: Yes

American Autowire 510063 1961-64 Chevy Impala Classic Update Wiring Harness
Tagged: , , , , , , , , .