Wire Wiring Harness

2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec

Posted on by
2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec

2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
Free adapter connectors TO CONVERT Harness TO EV6 or EV1 Injectors (only if needed). Please message us in Buyers notes if you need EV6 or EV1 connectors. Otherwise, if left blank, Delphi Multec connectors will be sent by default. This harness allows use of the factory VORTEC intake manifold and multec injectors. This Standalone is a Plug n’ Play design with FOUR wire hook-ups (switched power, constant power & ground connections required). Includes Detailed Installation Guide for Plug n’ Play Ease. All Engine & Transmission Sensor Connectors. ATO Style Fuse Block. Switched Power Ignition Relay. TCC / Switch Wiring. 2003, 2004, 2005, 2006, 2007 – Chevy, GMC, Cadillac & Hummer VORTEC engines with electronic throttle body & 4L80E transmissions. These Standalones are designed with a sliding grommet seal & 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. The item “2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec” is in sale since Thursday, April 25, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “ampmotorsport” and is located in Altamonte Springs, Florida. This item can be shipped worldwide.
  • Superseded Part Number: 0307VORTEC_DBW_80E
  • Modified Item: Yes
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Interchange Part Number: 0307VORTEC_DBW_80E
  • Type: Standalone Fuel injection & Transmission Harness
  • Manufacturer Part Number: 03-07LSVOR_DBW_80E
  • Other Part Number: 0307VORTEC_DBW_80E
  • PSI: Custom StandAlone Conversion Harness
  • Brand: AmpMoto
  • Fitment Type: Performance/Custom
  • Warranty: Yes
  • Mounting Hardware Included: Yes

2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
2003_2007_LS_STANDALONE_WIRING_HARNESS_4L80E_DBW_VORTEC_4_8_5_1_6_0_Multec_01_aqyp Tagged: , , , , , , .

1999 2003 VORTEC 4.8 5.3 6.0 STANDALONE WIRING HARNESS WithT56 (DBC) USA Seller

Posted on by
1999 2003 VORTEC 4.8 5.3 6.0 STANDALONE WIRING HARNESS WithT56 (DBC) USA Seller
1999 2003 VORTEC 4.8 5.3 6.0 STANDALONE WIRING HARNESS WithT56 (DBC) USA Seller
1999 2003 VORTEC 4.8 5.3 6.0 STANDALONE WIRING HARNESS WithT56 (DBC) USA Seller

1999 2003 VORTEC 4.8 5.3 6.0 STANDALONE WIRING HARNESS WithT56 (DBC) USA Seller
1999 – 2003 VORTEC 4.8 5.3 6.0 STANDALONE WIRING HARNESS W/T56 (DBC). 99 -’03 Vortec 4.8, 5.3, 6.0 Engines with Mechanical Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions Transmissions. Parts Included: Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description: These harnesses are designed for’99 -’03 Vortec retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal. The item “1999 2003 VORTEC 4.8 5.3 6.0 STANDALONE WIRING HARNESS WithT56 (DBC) USA Seller” is in sale since Friday, May 25, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “maddogperformance” and is located in Brandon, Florida. This item can be shipped worldwide.
  • Type: Wiring Harness
  • Manufacturer Part Number: 4101
  • Brand: CNCH
  • Fitment Type: Performance/Custom
  • Bundle Listing: Yes

1999 2003 VORTEC 4.8 5.3 6.0 STANDALONE WIRING HARNESS WithT56 (DBC) USA Seller
1999_2003_VORTEC_4_8_5_3_6_0_STANDALONE_WIRING_HARNESS_WithT56_DBC_USA_Seller_01_ccc Tagged: , , , , , .

1997-2006 Dbc Ls1 Standalone Wiring Harness T56 4.8 5.3 6.0 Vortec

Posted on by
1997-2006 Dbc Ls1 Standalone Wiring Harness T56 4.8 5.3 6.0 Vortec
1997-2006 Dbc Ls1 Standalone Wiring Harness T56 4.8 5.3 6.0 Vortec

1997-2006 Dbc Ls1 Standalone Wiring Harness T56 4.8 5.3 6.0 Vortec
EV1 Injector Connectors (please message us if you need injector connecter adapters). 3 wire MAF (mass airflow sensor). 1 wire alternator. Drive by Cable (nonelectric throttle body). 2 Relays & fuses. T56, TH350, TH400 power-glide 700R4 or nonelectric transmissions. 1997 – 2004 CORVETTE / CTS-V LS1 / LS6 ENGINES (DRIVE BY CABLE ONLY) w/ T56 OR NON-ELECTRONIC AUTOMATIC TRANSMISSION (TH350, TH400, POWERGLIDE, 700R4, 200-4R). Our harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak-proof installation. All harnesses are equipped with needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. Complete install instruction packet. Extended 36 added for easier computer mounting. All wires match GM Color Codes. 100% assembled in the U. The item “1997-2006 DBC LS1 STANDALONE WIRING HARNESS T56 4.8 5.3 6.0 VORTEC” is in sale since Friday, August 16, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “euroecycles” and is located in Maitland, Florida. This item can be shipped worldwide.
  • Superseded Part Number: eMoto_Vortec-LS1-T56
  • Modified Item: Yes
  • Custom Bundle: No
  • Interchange Part Number: eMoto_Vortec-LS1-T56
  • Type: LS1 Standalone Harness (Fuel Injection & Transmis)
  • Manufacturer Part Number: eMoto_Vortec-LS1-T56
  • Modification Description: – 3 wire MAF (mass airflow sensor). – 1 wire alternator. – Drive by Cable (nonelectric throttle body). – T56, TH350, TH400 power-glide 700R4 or nonelectric transmissions.
  • Other Part Number: eMoto_Vortec-LS1-T56
  • Brand: eMoto-Vortec
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No
  • Warranty: Unspecified Length
  • Mounting Hardware Included: Yes

1997-2006 Dbc Ls1 Standalone Wiring Harness T56 4.8 5.3 6.0 Vortec
1997_2006_Dbc_Ls1_Standalone_Wiring_Harness_T56_4_8_5_3_6_0_Vortec_01_mw Tagged: , , , , .

1998 2003 VORTEC 4.8 5.3 6.0 Standalone Fuel Inj. Wiring Harness With4L60E (DBC)

Posted on by
1998 2003 VORTEC 4.8 5.3 6.0 Standalone Fuel Inj. Wiring Harness With4L60E (DBC)
1998 2003 VORTEC 4.8 5.3 6.0 Standalone Fuel Inj. Wiring Harness With4L60E (DBC)
1998 2003 VORTEC 4.8 5.3 6.0 Standalone Fuel Inj. Wiring Harness With4L60E (DBC)

1998 2003 VORTEC 4.8 5.3 6.0 Standalone Fuel Inj. Wiring Harness With4L60E (DBC)
EASY TO INSTALL 4 WIRE CONNECTION! 99 -’03 Vortec Drive by Cable Standalone Wiring Harness. Application’99 -’03 Vortec 4.8, 5.3, 6.0 Engines with Mechanical Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’99 -’03 Vortec retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal. The item “1998 2003 VORTEC 4.8 5.3 6.0 Standalone Fuel Inj. Wiring Harness With4L60E (DBC)” is in sale since Monday, August 5, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “maddogperformance” and is located in Brandon, Florida. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Surface Finish: Black
  • Bundle Listing: Yes
  • Type: Wiring Harness
  • Manufacturer Part Number: 3250
  • Brand: CNCH
  • Fitment Type: Direct Replacement
  • Non-Domestic Product: No
  • Warranty: 90 Day

1998 2003 VORTEC 4.8 5.3 6.0 Standalone Fuel Inj. Wiring Harness With4L60E (DBC)
1998_2003_VORTEC_4_8_5_3_6_0_Standalone_Fuel_Inj_Wiring_Harness_With4L60E_DBC_01_dnx Tagged: , , , , , .

03-07 LS Vortec Standalone Wire Harness Drive by wire 4L80E 4.8 5.3 6.0 Delphi

Posted on by
03-07 LS Vortec Standalone Wire Harness Drive by wire 4L80E 4.8 5.3 6.0 Delphi

03-07 LS Vortec Standalone Wire Harness Drive by wire 4L80E 4.8 5.3 6.0 Delphi
03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY WIRE W/4L80E 4.8 5.3 6.0 EV6. This has the adapter 4L80E that plugs into the 4L60E harness and you will have to pin 2 wires to the blue retainer. FREE ADAPTER Connectors TO CONVERT HarnessTO EV6 Injectors IF NEEDED. No one else includes the connectors. Please put in the buyers notes if you need Ev6 connectors. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality and better. All Harnesses are long enough for the PCM to be mounted under the dash (ADDED 36 FOR EASY COMPUTER MOUNTING). All Harnesses have a High Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING). Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes with a complete install instruction packet. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). MADE IN THE U. If you have any questions please ask. The item “03-07 LS Vortec Standalone Wire Harness Drive by wire 4L80E 4.8 5.3 6.0 Delphi” is in sale since Thursday, May 9, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Type: Wiring Harness
  • Manufacturer Part Number: 9101
  • Brand: HPI
  • Fitment Type: Performance/Custom
  • Bundle Listing: Yes

03-07 LS Vortec Standalone Wire Harness Drive by wire 4L80E 4.8 5.3 6.0 Delphi
03_07_LS_Vortec_Standalone_Wire_Harness_Drive_by_wire_4L80E_4_8_5_3_6_0_Delphi_01_fipp Tagged: , , , , , , , .

New’03’07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)

Posted on by
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)

New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 03 -’07 Vortec Drive by Wire Standalone Wiring Harness. Application’03 -’07 Chevy, GMC, Cadillac, and Hummer Vortec Engines with Electronic Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’03 -’07 Vortec engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Note: If using an LS style car intake with EV1 fuel injectors, this unit is not the right one. For Fitment, please check the parts compatibility section of this listing. The item “New’03’07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)” is in sale since Friday, June 15, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Belts, Pulleys & Brackets”. The seller is “parts_links” and is located in New York, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Interchange Part Number: HAR1014
  • Manufacturer Part Number: HAR-1014
  • Other Part Number: 1100277380
  • Brand: Aftermarket Products
  • Warranty: 90 Day

New'03'07 Vortec With 4L60E Standalone Swap Wiring Harness (DBW)
New_03_07_Vortec_With_4L60E_Standalone_Swap_Wiring_Harness_DBW_01_bn Tagged: , , , , , , .

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L60E 4.8 5.3 6.0 Multec

Posted on by
03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L60E 4.8 5.3 6.0 Multec

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L60E 4.8 5.3 6.0 Multec
03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY WIRE W/4L60E 4.8 5.3 6.0 EV6. FREE ADAPTER Connectors TO CONVERT HarnessTO EV6 Injectors IF NEEDED. No one else includes the connectors. Please put in the buyers notes if you need Ev6 connectors. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality and better. All Harnesses are long enough for the PCM to be mounted under the dash (ADDED 36 FOR EASY COMPUTER MOUNTING). All Harnesses have a High Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING). Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes with a complete install instruction packet. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). MADE IN THE U. If you have any questions please ask. The item “03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L60E 4.8 5.3 6.0 Multec” is in sale since Monday, May 6, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Type: Wiring Harness
  • Manufacturer Part Number: 9101
  • Brand: HPI
  • Fitment Type: Performance/Custom
  • Bundle Listing: Yes

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L60E 4.8 5.3 6.0 Multec
03_07_LS_Vortec_Standalone_Wiring_Harness_Drivebywire_With4L60E_4_8_5_3_6_0_Multec_01_vqtn Tagged: , , , , , , , .

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L80E 4.8 5.3 6.0 VORTEC EV6 delp

Posted on by
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L80E 4.8 5.3 6.0 VORTEC EV6 delp
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L80E 4.8 5.3 6.0 VORTEC EV6 delp
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L80E 4.8 5.3 6.0 VORTEC EV6 delp
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L80E 4.8 5.3 6.0 VORTEC EV6 delp

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L80E 4.8 5.3 6.0 VORTEC EV6 delp
This harness is a 3 wire MAF and a 1 wire alternator. This has the adapter 4L80E that plugs into the 4L60E harness and you will have to pin 2 wires to the blue retainer. Looking for an OEM Quality, Stand Alone Engine Harness? FREE ADAPTER Connectors TO CONVERT HarnessTO EV6 OR (DELPHI MULTI 4.8 5.3 or 6.0) Injectors IF NEEDED. No one else includes the connectors. Please put in buyers notes if you need Delphi or ev6 connectors. As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality and better. All Harnesses are long enough for the PCM to be mounted under the dash (ADDED 36 FOR EASY COMPUTER MOUNTING). All Harnesses have a High Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING). Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes with a complete install instruction packet. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. EV1 Injector Connectors – FREE ADAPTERS TO CONVERT TO EV6 OR DELPHI CONNECTOR either set not both. 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). MADE IN THE U. If you have any questions please ask. The item “1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L80E 4.8 5.3 6.0 VORTEC EV6 delp” is in sale since Thursday, May 9, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: Ls1-T56 4L60E
  • Brand: Ls1-T56 4L60E Stand Alone
  • Non-Domestic Product: No

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L80E 4.8 5.3 6.0 VORTEC EV6 delp
1997_2006_DBC_LS1_STANDALONE_WIRING_HARNESS_With_4L80E_4_8_5_3_6_0_VORTEC_EV6_delp_01_kor Tagged: , , , , , , .

1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec

Posted on by
1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec
1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec
1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec
1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec
1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec

1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec
1999 – 2003 VORTEC STANDALONE WIRING HARNESS DRIVE BY CABLE with 4L60E TRANSMISSION. Fits 1999 – 2003 VORTEC 4.8L, 5.3L, 6.0L engines with Multec Injectors, 5 PIN MAF Sensor, Mechanical Throttle Body & 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. These harnesses are designed for’99 -’03 Vortec play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal. The item “1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec” is in sale since Thursday, April 18, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “euroecycles” and is located in Maitland, Florida. This item can be shipped worldwide.
  • Manufacturer Part Number: 99-03_VOR_60E-DBC-LS1
  • Brand: eMoto
  • Custom Bundle: No
  • Non-Domestic Product: No
  • Fitment Type: Performance/Custom
  • Modified Item: No
  • Superseded Part Number: 99-03_VOR_60E-DBC-LS1
  • Type: LS1 Standalone Wiring Harness
  • Warranty: Unspecified Length
  • Other Part Number: 99-03_VOR_60E-DBC
  • Country/Region of Manufacture: United States
  • Interchange Part Number: 99-03_VOR_60E-DBC

1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec
1998_2003_VORTEC_STANDALONE_WIRING_HARNESS_4L60E_Tran_4_8_5_3_6_0_DBC_Multec_01_ul Tagged: , , , , , , , .

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

Posted on by
03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
Harness allows use of the factory VORTEC intake manifold and multec injectors with flex-fuel injectors (EV6) optional. This standalone is completely plug & play with four wire hookup (switched power, constant power & ground connections required). Harnesses are designed with a sliding grommet seal and 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Please Note: Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. Complete engine & transmission wiring harness including all engine & transmission sensor connectors, ALDL connector, ATO Style fuse block, fuel pump relay, switched power ignition relay, performance shift mode wiring, MIL light wiring, P/N Wiring, TCC/Switch wiring, tach wiring, complete detailed instructions. The item “03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec” is in sale since Saturday, February 23, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “euroecycles” and is located in Maitland, Florida. This item can be shipped worldwide.
  • Superseded Part Number: 0307VORTEC_DBW_60E
  • Modified Item: Yes
  • Custom Bundle: Yes
  • Interchange Part Number: 03-07LSVORTEC_DBW_60E
  • Manufacturer Part Number: 03-07LSVOR_DBW_60E
  • Other Part Number: 0307VORTEC_DBW_60E
  • PSI: Custom StandAlone Conversion Harness
  • Brand: eMoto
  • Fitment Type: Performance/Custom
  • Warranty: Yes
  • Mounting Hardware Included: Yes

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec
03_07_VORTEC_StandAlone_Wiring_Harness_with4L60E_Drive_By_Wire_4_8_5_3_6_0_Multec_01_enln Tagged: , , , , , , , .