K-Tuned K-Series Tucked Engine Harness w/ Integrated Power Wire RSX Type S 02-04. Will NOT fit RHD cars or RWD cars. Will not fit RSX Base. Fits EP3 Si only with K20A2 or K24 Swap. 02-04 RSX Type S. 01-05 Civic EP3 (Type S or K24 Swap). Note: Will NOT fit RHD cars or RWD cars. Car Model: RSX Type S / Civic Si EP3 Years: 02-04 RSX Type S / 01-05 Civic Si Engine: K Series Swap / K20A2 K24 Swap EP3 / K20A2 RSX S Chassis Code: DC5 EP3. New design uses factory RSX connectors. The K-Tuned Tucked Engine Harness is designed as a high quality replacement 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC). We used only SAE certified automotive grade wiring resistant to moisture and most solvents to ensure quality and durability. High quality military grade heat shrink loom is used to cover entire harness which is resistant to gas and diesel. It is rated for -55° C to 150° C (-67° F to 320° F). We have also used a popular and clean tucked wire layout. The main harness runs over the valve cover and even hides the injector plugs, which come up from under the manifold. RDX injector plugs come with all harnesses. The pins on RDX injector plugs can be fitted into the oem RSX Type S 310cc plugs which makes switching quick and simple. We have incorporated the charge harness and alternator power wire into the harness. We used a thin, but high grade power wire to help keep the overall size down. On swap chassis, the power wire will work with fuse box in factory location or relocated under the dash. Separate power wire is available for other chassis and those that prefer to run their own charge wiring. Everything is labeled clearly to ensure a simple installation and no confusion. All plugs included except EVAP and AC. Covering is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F). SAE Certified Automotive Grade Wiring. All plugs are labeled. Harness runs over valve cover (Can be covered with coil pack cover). Integrated power wire and charge harness. Works with fuse box in stock location or relocated under dash. Injector wiring runs from under manifold between middle runners. Ground wire relocated to stud under coil pack cover (instead of front of the valve cover). Includes single wire temp sensor wire (For k-swap cars stock cluster). 3 Aux wires run from ECU to under intake manifold. Two ECU pins pre-installed. Wiring long enough for both VSS low frequency or high frequency (High Frequency transmissions will require repining plug and slight modification to VSS). Extra knock sensor plug included. RDX injectors plugs come standard RSX Type S injectors use the same pin. Can be easily switched. Please message us for a Return Authorization Number before sending anything back to avoid processing delays. Real Street Performance is unlike most “Race Shops”. We are a fully functioning wholesale and retail distribution warehouse in addition to a dyno-equipped tuning and engine building facility. Our sales center and order fulfillment center operates with state of the art, industry leading software that allows us to get you ALL of the parts you need for your build quickly and correctly the first time without the headaches or excuses. Sign up to our Newsletter. The item “K-Tuned K-Series Tucked Engine Harness with Integrated Power Wire RSX Type S 02-04″ is in sale since Saturday, May 16, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “realstreetrsp” and is located in Sanford, Florida. This item can be shipped worldwide.
- Engine Codes: K Series Swap / K20A2 K24 Swap EP3 / K20A2 RSX S
- MPN: KTH-215-ENG
- Brand: K-Tuned
- Manufacturer Part Number: KTH-215-ENG
