Wire Wiring Harness

FOR PREMIUM AMPLIFIED FACTORY SYSTEM RADIO REPLACEMENT. DOUBLE-DIN and SINGLE-DIN PROVISIONS INCLUDED (COMBO INCLUDES : DASH KIT and DATA BUS INTERFACE). This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. Some “SELLERS” say they will send you what is “available” at the time. They substitute cheap, poor quality generic products for the Metra Harnesses and Antenna Adapters (when applicable). Wouldn’t you rather get what you paid for? Don’t fall for cheap substitutions that come in plain plastic bags, don’t fit right and should cost a lot less. This Complete Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). DASH KIT and DATA BUS INTERFACE. DIN Radio Provision with Pocket. ISO DIN Radio Provision with Pocket. Double DIN Radio Provision. Stacked ISO Mount Units Provision. Retains Factory Climate Controls in Original Locations. Quick-Release, Snap-In ISO Mount System with Custom Trim Ring. Removable Oversized Storage Pocket with Built-In Radio Supports. Contoured and Textured to Match the Factory Dash. METRA DATA BUS INTERFACE. Designed to be used in vehicles that have the Rockford Fosgate audio system. The MITO-01 supplies a digital signal to turn the amplifier on. Also eliminates the “COM ERROR” message on the display when the OEM radio is removed. The radios speaker wires will provide the audio for the dash and rear speakers. The RCA’s will provide the audio to the amplifier to power the door speakers and woofer. (1) Metra Radio Housing 99-7010. (1) ISO Trim Plate. (2) Double DIN Brackets. (1) Double DIN Trim Plate. (1) Removable Storage Pocket. (1) Metra MITO-01 Interface. (1) 14-Pin Harness with RCA’s. (1) Factory Radio Side Harness. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The free listing tool. The item “99-7010 Car Stereo Single & Double-Din Radio Install Dash Kit for Eclipse with Amp” is in sale since Wednesday, June 13, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.

• Interchange Part Number: 2-Din Aftermarket Trim Plate & Wiring Harness
• Color: Painted Silver
• Manufacturer Part Number: Metra 99-7010 + AXTO-MI1
• Special Notes: Compatible w/ Premium Amplified Systems Only
• Supported Radio Sizes: Double Din, 2 ISO Din Radios, Single Din w/ Pocket
• Product Type: Aftermarket Radio Car Stereo Installation Kit
• Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
• Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
• International Buyers (Outside U.S.A.): International Buyers (Outside U.S.A.)
• Placement on Vehicle: Front
• Other Part Number: Installation Mounting Panel & Wire Plug
• Brand: Metra 99-7010 D-Din CD Player DVD Adapter Bezel

METRA 99-5827B “FACTORY NON-AMPLIFIED” COMBO AFTERMARKET DOUBLE/SINGLE DIN RADIO INSTALL KIT WITH FORD R. RETENTION INTERFACE AND ANTENNA ADAPTER “COMBO” FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO. THIS ITEM IS 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. Some “SELLERS” say they will send you what is “available” at the time. They substitute cheap, poor quality generic products for the Metra Harnesses and Antenna Adapters (when applicable). Wouldn’t you rather get what you paid for? Don’t fall for cheap substitutions that come in plain plastic bags, don’t fit right and should cost a lot less. This Complete Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). SHOWN IN DOUBLE DIN CONFIGURATION WITH AC PANELS ATTACHED. SHOWN IN SINGLE DIN WITH POCKET AND AC PANELS ATTACHED. This kit comes standard with Matte Black AC Vent Panels as shown above. AFTERMARKET RADIO INSTALLATION DASH KIT AND R. RETENTION INTERFACE & ANTENNA ADAPTER. PAINTED BLACK MATTE TO MATCH FACTORY COLOR AND FINISH. METRA RADIO INSTALLATION DASH KIT. Double DIN Radio Provision. Single/ISO-DIN Provision with Pocket. Integrated Controls for INFO Center. Heavy Duty ABS Plastic Construction. Plugs Into Car Harness at Radio. Provides 12 Volt 10 Amp Switched Voltage (Accessory) for Radio Operation. Includes Outputs for the Installation of a Navigation Radio. Provides Parking Brake, Reverse and Vehicle Speed Sense wires. USB Update Interface Compatible. NOTE: Used in Non Amplified Factory Systems. European Factory Antenna With Mini-Style Plug to Aftermarket Radio. (1) Metra 99-5827B Radio Trim Panel. (2) Radio Mounting Brackets. (1) Bottom Trim Panel. (2) Vent Trim Panels. (2) Carriage Bolts & Kep Nuts. (4) #8 X 3/8 Phillips Screws. (1) Metra Ford R. (1) Metra Antenna Adapter. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “99-5827B Double-Din Radio Install Dash Kit & Wires for Focus Car Stereo Mount” is in sale since Wednesday, August 29, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Placement on Vehicle: Front
• Product Type: AFTERMARKET RADIO STEREO INSTALLATION KIT
• SUPPORTED RADIO SIZES: DOUBLE DIN, 2 DIN, SINGLE ISO DIN W/POCKET
• COLOR: MATTE BLACK
• INTERNATIONAL BUYERS (OUTSIDE U.S.A.): PRODUCTS SOLD ARE FOR VEHICLES IN THE U.S.A. ONLY!
• Manufacturer Part Number: Metra 99-5827B + XSVI-5524-NAV + 40-EU10
• Country/Region of Manufacture: United States
• Interchange Part Number: Single-Din Mounting Trim Plate & Wiring Interface
• Other Part Number: 2-Din Installation Panel & Harness Antenna Module
• Brand: Metra 99-5827B CD Player DVD D-Din Adapter Bezel
• Warranty: Yes
• Surface Finish: PAINTED TO MATCH FACTORY COLOR AND FINISH

(CHECK SPECIFIC VEHICLE APPLICATIONS AND EXCLUSIONS). FOR USE WHEN REPLACING THE FACTORY OEM RADIO WITH AN AFTERMARKET DOUBLE-DIN RADIO. THIS ITEM IS 100% BRAND NEW! AFTERMARKET RADIO INSTALLATION KIT. NEW (FACTORY SEALED PACKAGING). PAINTED HIGH GLOSS PIANO BLACK TO MATCH FACTORY COLOR AND FINISH. AVAILABLE IN TWO FINISHES: MATTE BLACK &. HIGH GLOSS PIANO BLACK. DOES “NOT” WORK WITH VEHICLES EQUIPPED WITH CLIMATE CONTROLS. MUST BE EQUIPPED WITH STANDARD A/C AND HEATER CONTROLS. Recently Some Radio Manufacturers started making Double Din Radios with 7 Inch Screens (some slightly smaller). These Double Din Radios are about (7″ W x 4″ H) 7 inches wide by 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without some modifications. Some of these kits have been manufactured for many years before this new size radio became available. As far as we know, none of the Aftermarket Kit Manufacturers are using this new size opening at this time. The Standard Radio Opening for this kit is approximately (6 7/8 in x 3 7/8 in) or (173mm x 98mm). If you have one of these larger radios, you will need to “SAND” or “FILE” the opening of the TRIM RING or BEZEL to make it large enough to clear the “FACE” of your radio. Unfortunately at this time there are no other alternatives that we know of. AN EXPLANATION OF DIFFERENT TYPES OF RADIOS AND COMPATIBILITY. ” NOT COMPATIBLE ” WHEN INSTALLING A FACTORY OEM RADIO OR ATTEMPTING A FACTORY RADIO SWAP. ” COMPATIBLE ” WHEN INSTALLING AN AFTERMARKET DOUBLE DIN RADIO. A DOUBLE DIN RADIO IS ABOUT 7 X 4 INCHES IN SIZE. ” COMPATIBLE ” WHEN INSTALLING (2) STACKED ISO-DIN RADIOS TOGETHER. SEE ISO-DIN DESCRIPTION BELOW, BOTH UNITS SHOULD MATCH DESCRIPTION BELOW. ” NOT COMPATIBLE ” WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITH ” THE USE OF A RADIO SLEEVE OR CAN (USUALLY PROVIDED WITH YOUR RADIO). A SINGLE DIN RADIO IS ABOUT 7 X 2 INCHES IN SIZE AND HAS A METAL SLEEVE AROUND THE FIRST 3 INCHES OF THE RADIO. WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITHOUT ” THE USE OF A RADIO SLEEVE OR CAN, UNIT IS SCREW MOUNTED, MUST HAVE MOUNTING HOLES ON SIDE OF CHASSIS. UNIT IS A SINGLE DIN RADIO ABOUT 7 X 2 INCHES IN SIZE. If you are not sure if your radio will work with this kit. Please use the “ASK A QUESTION”. Link on the bottom of the page. Please include your Radio Brand and Model Number for faster service. METRA TURBO2 95-7510HG AFTERMARKET RADIO INSTALLATION DASH KIT. Painted High Gloss Piano Black to Match Factory Color and Finish. Retains Full Functionality of Factory HVAC Controls. Put Your Own Text within the Factory Display. Heavy Duty ABS Plastic Construction. Before you replace your factory radio with your New Aftermarket Radio, make sure you get the same parts a Professional Installer would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, Dual, Jensen, JVC, Kenwood, Panasonic, Pioneer, Sony, Soundstream, Valor or another stereo, you’ll want to get the right parts with the BEST Fit and Finish. Don’t be fooled by cheap or generic brands, only use Genuine Metra Products. This Aftermarket Radio Install Kit comes with good instructions on removing the Factory Radio as well as installing your New Aftermarket Radio. If you would like a Complete Set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING. Do you have Steering Wheel Controls like Volume, Track and Seek Buttons? Are these used on a daily basis? Maybe during a morning or evening commute? If so, the ASWC-1 Steering Wheel Control Interface might be the perfect addition. It works with most major brands like Alpine, Clarion, Kenwood, Pioneer, Sony and more. Please see the ASWC-1 LISTING. For complete list of brands and details. If you have any questions, kindly use the “ASK A QUESTION”. (1) METRA 95-7510HG Radio/Climate Control Housing. (2) Climate Control Extension Harnesses. (4) Plastic Panel Clips. This ITEM ships “FREE” in the U. Protectorates and APO/FPO Addresses. Must have a valid U. We are a U. Although these parts work with many vehicles outside the U. To research whether the part they are ordering will MATCH , FIT , WORK or is COMPATIBLE with their vehicle before purchasing. We suggest you check the online forums for your particular vehicle, normally you will find someone who has already posted on this topic and provided the needed information. We apologize, we cannot join every forum to do this. First Class Package International (Trackable). 8-15 Days (about 3 Weeks). First Class Package International. 8-28 Days (about 4 Weeks). 6-10 Days (about 2 Weeks). 6-15 Days (about 3 Weeks). MAKE OFFER Sometimes you might see a lower price or a sale price. It doesn’t mean your offer will be accepted, but it is a way of having your offer considered. Kindly press the button to make an offer for consideration. If we do not have this button posted on this listing, it means this feature is not available for use at this time. We do our very best to correctly represent all items we sell. Unfortunately, sometimes there may be incidents beyond our control. We realize this can be very frustrating and upsetting, but if you give us a chance, you might be pleasantly surprised to find that there can be solutions to just about any problem. By using the “ASK A QUESTION”. We normally will respond to you within 24 hours or within the next day. You can even call our Customer Service Line at 657.464.0713. Please leave us a message, and we will get back to you as soon as possible. Please describe the problem as throughly as possible, pictures are always helpful, so we can see what you are seeing. We reserve the right to determine whether the part(s) will need to be exchanged or another course of action may be taken to resolve this matter quickly and efficiently. We provide our services as a courtesy for all International Buyers ANYONE OUTSIDE THE U. The item “Metra 95-7510HG Double-Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount” is in sale since Wednesday, November 9, 2011. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation.

• Supported Radio Sizes: Double-Din, DDin, 2Din, 2 ISO-Din Stacked Radios
• Product Type: Aftermarket Radio Car Stereo Installation Kit
• Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
• Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
• International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!
• Interchange Part Number: Aftermarket 2-Din Trim Plate & Wiring Harness
• Color: Painted High Gloss Black Piano Finish
• Manufacturer Part Number: Metra 95-7510HG
• Placement on Vehicle: Front
• Other Part Number: Installation Mounting Panel & Wire Interface
• Brand: Metra 95-7510HG CD Player DVD D-Din Adapter Bezel

FOR PREMIUM AMPLIFIED FACTORY SYSTEM RADIO REPLACEMENT. DOUBLE-DIN and SINGLE-DIN PROVISIONS INCLUDED (COMBO INCLUDES : DASH KIT and AMP TURN-ON INTERFACE). This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. Some “SELLERS” say they will send you what is “available” at the time. They substitute cheap, poor quality generic products for the Metra Harnesses and Antenna Adapters (when applicable). Wouldn’t you rather get what you paid for? Don’t fall for cheap substitutions that come in plain plastic bags, don’t fit right and should cost a lot less. This Complete Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). DASH KIT and AMP TURN-ON INTERFACE. FACTORY ROCKFORD FOSGATE SYSTEM. DIN Radio Provision with Pocket. ISO Mount Radio Provision with Pocket. Double DIN Radio Provision. Stacked ISO Mount Units Provision. Retains Factory Air Vents, Hazard Button, & Passenger Airbag Light in Original Locations. Quick-Release, Snap-In ISO Mount System with Custom Trim Ring. Removable Oversized Storage Pocket with Built-In Radio Supports. Contoured, Textured and Painted to Match the Factory Dash. Heavy Duty ABS Plastic Construction. METRA MITSUBISHI DATA BUS INTERFACE. Designed to be used in vehicles that have the Rockford Fosgate audio system. The MITO-02 supplies a digital signal to turn the amplifier on. When installing a radio that has navigation built-in, the MITO-02 can supply VSS (Vehicle Speed Sense), Parking Brake, and Reverse. Reverse is not available on manual transmission vehicles. If vehicle is equipped with Bluetooth, that feature will be retained. (1) Metra Radio Housing 99-7011. (1) ISO Trim Plate. (2) Double DIN Brackets. (1) Double DIN Trim Plate. (1) Removable Storage Pocket. (1) Metra Amp Turn-On Interface. (1) 14-Pin Harness with RCA’s. (1) Vehicle Side Harness. Metra Amp Turn-On Interface. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “99-7011 Car Stereo Double-Din Radio Install Dash Kit for Lancer with Fosgate Amp” is in sale since Wednesday, June 13, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam.

• Brand: Metra 99-7011 CD Player DVD D-Din Adapter Bezel
• Manufacturer Part Number: Metra 99-7011 + Axxess MITO-02
• Placement on Vehicle: Front
• Surface Finish: FACTORY MATCHED
• Warranty: Yes
• Product Type: AFTERMARKET RADIO STEREO INSTALLATION KIT
• SUPPORTED RADIO SIZES: DOUBLE DIN, 2 ISO DIN RADIOS, SINGLE DIN W/POCKET
• INTERNATIONAL BUYERS (OUTSIDE U.S.A.): PRODUCTS SOLD ARE FOR VEHICLES IN THE U.S.A. ONLY!
• Interchange Part Number: MI3019B 2-Din Mounting Trim Plate & Wiring Harness
• Other Part Number: MIT-K894 Single-Din Installation Panel & Plugs
• Country/Region of Manufacture: United States

(CHECK SPECIFIC VEHICLE APPLICATIONS AND EXCLUSIONS). FOR USE WHEN REPLACING BOTH FACTORY AMPLIFIED OR NON-AMPLIFIED RADIO WITH AN AFTERMARKET DOUBLE-DIN RADIO. THIS ITEM IS 100% BRAND NEW! 95-7605 + 70-7551 + 40-NI10. AFTERMARKET RADIO INSTALLATION KIT WITH. HARNESS AND ANTENNA ADAPTER COMBINATION PACKAGE. NEW (FACTORY SEALED PACKAGING). PAINTED SILVER TO MATCH FACTORY COLOR AND FINISH. Recently Some Radio Manufacturers started making Double Din Radios with 7 Inch Screens (some slightly smaller). These Double Din Radios are about (7″ W x 4″ H) 7 inches wide by 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without some modifications. Some of these kits have been manufactured for many years before this new size radio became available. As far as we know, none of the Aftermarket Kit Manufacturers are using this new size opening at this time. The Standard Radio Opening for this kit is approximately (6 7/8 in x 3 7/8 in) or (173mm x 98mm). If you have one of these larger radios, you will need to “SAND” or “FILE” the opening of the TRIM RING or BEZEL to make it large enough to clear the “FACE” of your radio. Unfortunately at this time there are no other alternatives that we know of. AN EXPLANATION OF DIFFERENT TYPES OF RADIOS AND COMPATIBILITY. ” NOT COMPATIBLE ” WHEN INSTALLING A FACTORY OEM RADIO OR ATTEMPTING A FACTORY RADIO SWAP. ” COMPATIBLE ” WHEN INSTALLING AN AFTERMARKET DOUBLE DIN RADIO. A DOUBLE DIN RADIO IS ABOUT 7 X 4 INCHES IN SIZE. ” COMPATIBLE ” WHEN INSTALLING (2) STACKED ISO-DIN RADIOS TOGETHER. SEE ISO-DIN DESCRIPTION BELOW, BOTH UNITS SHOULD MATCH DESCRIPTION BELOW. ” NOT COMPATIBLE ” WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITH ” THE USE OF A RADIO SLEEVE OR CAN (USUALLY PROVIDED WITH YOUR RADIO). A SINGLE DIN RADIO IS ABOUT 7 X 2 INCHES IN SIZE AND HAS A METAL SLEEVE AROUND THE FIRST 3 INCHES OF THE RADIO. WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITHOUT ” THE USE OF A RADIO SLEEVE OR CAN, UNIT IS SCREW MOUNTED, MUST HAVE MOUNTING HOLES ON SIDE OF CHASSIS. UNIT IS A SINGLE DIN RADIO ABOUT 7 X 2 INCHES IN SIZE. If you are not sure if your radio will work with this kit. Please use the “ASK A QUESTION”. Link on the bottom of the page. Please include your Radio Brand and Model Number for faster service. METRA TURBO2 95-7605 AFTERMARKET RADIO INSTALLATION DASH KIT. Painted Silver to Match Factory Color and Finish. Replaces the Entire Climate Control Panel. Retains Full Functionality of the Factory HVAC System. Heavy Duty ABS Plastic Construction. METRA 70-7551 AMP INTEGRATION WIRE HARNESS. Plugs Into Car Harness at Radio. Power and 4 Composite Inputs. RCA Connectors for Factory Amp Retention. METRA 40-NI10 ANTENNA ADAPTER. Nissan Factory Diversity Antenna Plug to Aftermarket Radio Antenna Adapter. Before you replace your factory radio with your New Aftermarket Radio, make sure you get the same parts a Professional Installer would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, Dual, Jensen, JVC, Kenwood, Panasonic, Pioneer, Sony, Soundstream, Valor or another stereo, you’ll want to get the right parts with the BEST Fit and Finish. Don’t be fooled by cheap or generic brands, only use Genuine Metra Products. This Aftermarket Radio Install Kit comes with good instructions on removing the Factory Radio as well as installing your New Aftermarket Radio. This listing INCLUDES a Complete Set with Amp Integration Wiring Harness and Antenna Adapte r. Do you have Steering Wheel Controls like Volume, Track and Seek Buttons? Are these used on a daily basis? Maybe during a morning or evening commute? If so, the ASWC-1 Steering Wheel Control Interface might be the perfect addition. It works with most major brands like Alpine, Clarion, Kenwood, Pioneer, Sony and more. Please see the ASWC-1 LISTING. For complete list of brands and details. If you have any questions, kindly use the “ASK A QUESTION”. (1) METRA 95-7605 Radio Housing. (1) Climate Control Cable. (1) METRA 70-7551 Nissan Amp Integration Wire Harness. (1) METRA 40-NI10 Nissan Antenna Adapter. METRA 70-7551 NISSAN AMP INTEGRATION WIRE HARNESS. METRA 40-NI10 NISSAN ANTENNA ADAPTER. This ITEM ships “FREE” in the U. Protectorates and APO/FPO Addresses. Must have a valid U. We are a U. Although these parts work with many vehicles outside the U. To research whether the part they are ordering will MATCH , FIT , WORK or is COMPATIBLE with their vehicle before purchasing. We suggest you check the online forums for your particular vehicle, normally you will find someone who has already posted on this topic and provided the needed information. We apologize, we cannot join every forum to do this. First Class Package International (Trackable). 8-15 Days (about 3 Weeks). First Class Package International. 8-28 Days (about 4 Weeks). 6-10 Days (about 2 Weeks). 6-15 Days (about 3 Weeks). MAKE OFFER Sometimes you might see a lower price or a sale price. It doesn’t mean your offer will be accepted, but it is a way of having your offer considered. Kindly press the button to make an offer for consideration. If we do not have this button posted on this listing, it means this feature is not available for use at this time. We do our very best to correctly represent all items we sell. Unfortunately, sometimes there may be incidents beyond our control. We realize this can be very frustrating and upsetting, but if you give us a chance, you might be pleasantly surprised to find that there can be solutions to just about any problem. By using the “ASK A QUESTION”. We normally will respond to you within 24 hours or within the next day. You can even call our Customer Service Line at 657.464.0713. Please leave us a message, and we will get back to you as soon as possible. Please describe the problem as throughly as possible, pictures are always helpful, so we can see what you are seeing. We reserve the right to determine whether the part(s) will need to be exchanged or another course of action may be taken to resolve this matter quickly and efficiently. We provide our services as a courtesy for all International Buyers ANYONE OUTSIDE THE U. The item “95-7605 Double-Din Radio Install Dash Kit with Wires for G35, Car Stereo Mount” is in sale since Wednesday, November 09, 2011. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “honestdee” and is located in Los Angeles, CA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Dominican republic, El salvador.

• Brand: Metra 95-7605 + 70-7551 + 40-NI10
• Manufacturer Part Number: Metra 95-7605 CD Player DVD D-Din Adapter Bezel
• Interchange Part Number: 2-Din Mounting Trim Panel & Wiring Harness
• Other Part Number: Aftermarket Installation Plate & Antenna Plugs
• Placement on Vehicle: Front
• Surface Finish: PAINTED TO MATCH FACTORY COLOR AND FINISH
• Warranty: Yes
• Country/Region of Manufacture: United States
• Product Type: AFTERMARKET RADIO STEREO INSTALLATION KIT
• SUPPORTED RADIO SIZES: DOUBLE-DIN, 2-DIN, 2 ISO-DIN STACKED RADIOS
• COLOR: PAINTED SILVER
• RADIO OPENING DIMENSIONS: 6 x 3 INCHES (173mm x 98mm)
• RADIO SIZE EXCLUSIONS: DOES NOT WORK WITH 7 x 4 IN (180mm x 100mm) RADIOS
• INTERNATIONAL BUYERS: PRODUCTS SOLD ARE FOR VEHICLES IN THE U.S.A. ONLY!

FOR VEHICLES EQUIPPED WITH PREMIUM AMPLIFIED FACTORY SYSTEMS. INCLUDES: DASH KIT, WIRE HARNESS, AND ANTENNA ADAPTER. EVERYTHING YOU NEED BESIDES A NEW RADIO. This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. Some “SELLERS” say they will send you what is “available” at the time. They substitute cheap, poor quality generic products for the Metra Harnesses and Antenna Adapters (when applicable). Wouldn’t you rather get what you paid for? Don’t fall for cheap substitutions that come in plain plastic bags, don’t fit right and should cost a lot less. This Complete Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). DASH KIT, WIRE HARNESS, ANTENNA ADAPTER. Replaces the Entire Climate Control Panel. Retains Full Functionality of the HVAC System. Custom Design Allows Retention of Factory Air Vents in Original Locations. Removable Oversized Storage Pocket with Built-In Radio Supports. Includes Installation Parts for a Double-DIN Radio, or 2 Single-DIN Radios. Quick Release Snap-In ISO Mount System with a Custom Trim Ring. Painted to Match Factory Color and Texture. Contoured and Textured to Match the Factory Dash. Includes All Necessary Hardware for a Complete Installation. Step-By-Step Disassembly and Assembly Instructions. METRA AMP INTEGRATION WIRE HARNESS. Plugs Directly Into The Factory Harness. Fast and Easy Installation. Diversity Factory Antenna with 2-Pin Plug to Aftermarket Radio. (1) Metra 99-7604 Radio Housing. (1) ISO Trim Plate. (1) Double DIN Trim Plate. (2) Double DIN Brackets. (1) Top Radio Housing Bracket. (2) #8 x 3/8 Phillip Screws. (1) Climate Control Cable. (1) Metra Amp Integration Wire Harness. (1) Metra Antenna Adapter. Metra Amp Integration Harness. In the (48 States) Contiguous. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The free listing tool. The item “Aftermarket Double-Din Radio Install Dash Kit with Wires for G35 Car Stereo Mount” is in sale since Wednesday, October 19, 2011. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: Metra 99-7604 CD Player DVD D-Din Adapter Bezel
• Placement on Vehicle: Front
• Surface Finish: PAINTED TO MATCH FACTORY COLOR AND FINISH
• Warranty: Yes
• Brand: Metra 99-7604 + 70-7551 + 40-NI10
• Product Type: AFTERMARKET RADIO STEREO INSTALLATION KIT
• SUPPORTED RADIO SIZES: DOUBLE DIN, 2-DIN, ISO STACKED, ISO/SINGLE-DIN
• INTERNATIONAL BUYERS (OUTSIDE U.S.A.): PRODUCTS SOLD ARE FOR VEHICLES IN THE U.S.A. ONLY!
• COLOR: PAINTED SILVER
• Interchange Part Number: 2-Din Mounting Trim Plate & Wiring Harness
• Other Part Number: Single-Din Installation Panel & Antenna Plugs
• Country/Region of Manufacture: United States