Wire Wiring Harness

Engine wiring harnesses for aftermarket ecu’s Link, Ecumaster, Haltech, Syvecs etc. Custom Race / Road car wiring looms. Any petrol Engines possible. Please contact before placing order. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Starters, Alternators, ECUs & Wiring\Wiring Harnesses, Cables & Connectors”. The seller is “wiredin5″ and is located in this country: GB. This item can be shipped to United Kingdom.

• Items Included: Wire Harness
• Brand: Unbranded
• Type: Loom

Item: HALTECH Elite 550 +Basic Universal Wire-in Harness Kit HT-150402. Category : Universal ECU Kits. Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you’re ready to go! Colour coded and labelled wires that match the detailed wiring diagram for a confusion free construction process. The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. The Elite 550 is a simple yet powerful ECU ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and 4 ignition channels and a 3 BAR internal MAP sensor. Alongside the Elite 550 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide. Supports 1 to 8 Cylinder engines. 1 to 2 Rotor engines. Normally aspirated or forced induction. Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF). Sequential, semi sequential, batch or multipoint injection patterns. Distributor ignition systems, multi-coil systems or Haltech Multiplex CDI systems. Connect to a wide range of display dashes and expansion devices via CAN. Waterproof case (IP67) (with USB cover fitted). 34 position AMP connector. 4 x Fuel Injection Outputs peak and hold (0-8A peak / 0-2A hold). 4 x Ignition Outputs. 2 x Dedicated Engine Position inputs with extensive trigger type support. 1 x Digital Pulsed Input. 5 x Digital Pulsed Outputs. 1 x Analogue Voltage Input. 3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature). Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi). Up to 33 channels of Input & Output (I/O) expansion (via CAN). USB Laptop Communication (Windows). ESP Calibration Software – Intuitive and easy to use. This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. Low Impedance Injector control with Programmable Injector Peak and Hold Currents. Closed Loop O2 Control – for precise tuning (With optional external CAN O2 Wideband Controller Kit). Closed Loop Idle Speed Control – requires 1 or 2 user defined outputs (BAC type). Laptop data logging -Data log all available channels directly to your laptops hard drive for both tuning and diagnostics. CAN Bus communication for Haltech Dashes and expansion devices or OBDII (view live engine data & set and clear diagnostic trouble codes). 2 Injection Stages for use with Rotary Engines. ECU comes fully enabled, no additional charges for advanced features. Tuning Table Resolution up to 32 x 16. Limitless tuning flexibility -Tune your engine by a combination of 3D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections. Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height or any channel for ultimate flexibility – Dual mapping is a thing of the past. Per Cylinder Tuning Correction – 3D. Wideband O2 – Connect up to 2 Channels via CAN expansion devices. Thermocouples/EGT (Exhaust Gas Temperature) – Connect up to 12 Channels via external CAN expansion devices. Boost Control -Intelligent 3D Open loop, with flexible user definable axis and 6 fully user definable corrections. Modes – example boost by gear, road speed etc. The item “HALTECH Elite 550+ Basic Universal Wire-in Harness Kit HT-150402″ is in sale since Monday, October 26, 2020. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Electric, Hybrid & PHEV Specific Parts\Control Modules”. The seller is “cjmotor” and is located in AU. This item can be shipped worldwide.

• Brand: HALTECH
• Manufacturer Part Number: HT-150402

Custom made from a Haltech Long Harness but will suit any engine with 34 / 26 style plugs. Comes as per photos and will post. The item “Wiring Harness to suit Mitsubishi 4G63T 6 Bolt Engine Evo Galant Haltech Link” is in sale since Sunday, October 18, 2020. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Performance Parts\Other”. The seller is “pickersgilla” and is located in Toowoomba, QLD. This item can be shipped worldwide.

• Brand: Mitsubishi

Incoming search terms:

• used dash wiring harness for 2002 Mitsubishi galant 2 4l

Haltech Platinum Interceptor ECU Genuine part number #HT-058100. Simple way to retune your engine. Adjusts fuel mixtures & ignition timing. Retains OEM functions like knock control. More affordable than a stand alone ECU. Universal fitment for many vehicles. Includes wiring harness, serial cable, serial to USB adapter, instructions, software CD & stickers. Brand new condition, never installed. Description from Haltech website. The Platinum Interceptor is a totally new piggy back ECU designed to work in parallel with your existing factory ECU. The Platinum Interceptor provides tuning of fuel mixtures, ignition timing, boost levels and many other features. The Platinum Interceptor is installed using a universal type wiring loom and tuning is performed on a laptop with user friendly Interceptor software for Windows. As the Platinum Interceptor works with the factory ECU, you need only tune where necessary, maximising power whilst maintaining factory levels of economy, idle quality, cold start etc. Performance has never been achieved so quickly, easily and affordably. To suit the following vehicles. BMW 325i (E46) -Ford Falcon 4.0 (EF, EL, AU, BA) -Ford Falcon V8 (EL, AU, BA) -Holden Commodore V6 (VR, VS, VT, VX, VY, VZ) -Holden Commodore V8 (VN, VR, VS, VT, VX) -Honda Integra (DC2, DC5) -Honda S2000 -Mazda 3 MPS (BK) -Mazda 6 MPS -Mazda MX-5 (NB, NC) -Mazda RX-7 (FC) -Mazda RX-8 -Mitsubishi 3000GT -Mitsubishi Galant VR4 V6 -MItsubishi Lancer Evolution (6, 7, 8, 9) -Nissan 350Z -Nissan 180SX/200SX (S13, S14) -Nissan Silvia (S13, S14) -Nissan Skyline GTS-T (R32, R33) -Nissan Skyline GTR (R32, R33) -Subaru Impreza WRX (GC, GD) -Subaru Liberty B4 -Subaru Liberty RS -Subaru Liberty GT -Toyota Corolla 1.8 -Toyota Landcruiser V8 -Toyota MR2 Spider -Toyota Supra (MK3, MK4) -Toyota/Lexus Soarer -Volkswagon Golf GTi (MK4). NOTE- fuel control only on these models. Also suits many other models. Check my other listings for more parts. The item “NEW Haltech Platinum Interceptor Piggyback ECU & Universal Wiring Harness Loom” is in sale since Monday, February 22, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\ECUs, Chips, Cruise Control\ECUs”. The seller is “200via” and is located in Banora Point, New South Wales. This item can be shipped to Australia, United States, New Zealand, United Kingdom, Canada.

• Manufacturer Part Number: HT-058100
• Brand: Haltech

2.5m (8 ft) Basic Universal Wire Packs (no relays or fuses connectors or terminals). To simplify and keep costs down, Hard Wired Motorsports can now provide all wires necessary to wire or re-wire existing or new aftermarket or OEM computers. Whether you are installing fresh, piggy-backing or simply cleaning up your existing harness, Hard Wired has you covered. Introducing our Hard Wired Universal Un-Terminated 2.5m Wire Packs. Our Wire packs are made to purchasers specific Aftermarket or OEM ECU & Engine Package. Servicing ALL major aftermarket brands of ECU’s. Motec, Haltech, Link, Autronic, Adaptronic, ECU Master, AEM, Wolf Etc… If your unsure, send me a message and we can let you know. All wires are supplied colour matched to manufacturers diagram using Australian made Tycab automotive specific wire rated to 105deg C. Depending on application most wire packs produced contain. 4, 6 or 8 Injectors. 4, 6 or 8 Ignition. 2 Shielded 2 core wires. Air and Coolant Temp. 3 X 5V Sensor Power. 6 X Signal Grounds. Please Specify your Engine Type and ECU when ordering. See other listing for terminated AMP Superseal Wire Pack if using existing AMP 34 and 26 pin plugs. The item “Harness Wire Pack Un-terminated Haltech Motec Link Autronic Emtron ECU” is in sale since Wednesday, May 9, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Engines, Components\Other”. The seller is “hardwiredmotorsports” and is located in Coffs Harbour. This item can be shipped worldwide.

• Manufacturer Part Number: Does Not Apply
• Brand: Hard Wired

Item: HALTECH Elite 550 +Basic Universal Wire-in Harness Kit HT-150402. Category : Universal ECU Kits. Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you’re ready to go! Colour coded and labelled wires that match the detailed wiring diagram for a confusion free construction process. The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. The Elite 550 is a simple yet powerful ECU ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and 4 ignition channels and a 3 BAR internal MAP sensor. Alongside the Elite 550 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide. Supports 1 to 8 Cylinder engines. 1 to 2 Rotor engines. Normally aspirated or forced induction. Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF). Sequential, semi sequential, batch or multipoint injection patterns. Distributor ignition systems, multi-coil systems or Haltech Multiplex CDI systems. Connect to a wide range of display dashes and expansion devices via CAN. Waterproof case (IP67) (with USB cover fitted). 34 position AMP connector. 4 x Fuel Injection Outputs peak and hold (0-8A peak / 0-2A hold). 4 x Ignition Outputs. 2 x Dedicated Engine Position inputs with extensive trigger type support. 1 x Digital Pulsed Input. 5 x Digital Pulsed Outputs. 1 x Analogue Voltage Input. 3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature). Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi). Up to 33 channels of Input & Output (I/O) expansion (via CAN). USB Laptop Communication (Windows). ESP Calibration Software – Intuitive and easy to use. This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. Low Impedance Injector control with Programmable Injector Peak and Hold Currents. Closed Loop O2 Control – for precise tuning (With optional external CAN O2 Wideband Controller Kit). Closed Loop Idle Speed Control – requires 1 or 2 user defined outputs (BAC type). Laptop data logging -Data log all available channels directly to your laptops hard drive for both tuning and diagnostics. CAN Bus communication for Haltech Dashes and expansion devices or OBDII (view live engine data & set and clear diagnostic trouble codes). 2 Injection Stages for use with Rotary Engines. ECU comes fully enabled, no additional charges for advanced features. Tuning Table Resolution up to 32 x 16. Limitless tuning flexibility -Tune your engine by a combination of 3D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections. Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height or any channel for ultimate flexibility – Dual mapping is a thing of the past. Per Cylinder Tuning Correction – 3D. Wideband O2 – Connect up to 2 Channels via CAN expansion devices. Thermocouples/EGT (Exhaust Gas Temperature) – Connect up to 12 Channels via external CAN expansion devices. Boost Control -Intelligent 3D Open loop, with flexible user definable axis and 6 fully user definable corrections. Modes – example boost by gear, road speed etc. The item “HALTECH Elite 550+ Basic Universal Wire-in Harness Kit HT-150402″ is in sale since Wednesday, December 18, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Electric Vehicle Parts\Controllers”. The seller is “cjmotor2″ and is located in AU. This item can be shipped worldwide.

• Brand: HALTECH
• Manufacturer Part Number: HT-150402

Haltech HT-150402 Elite 550 ECU +2.5m (8 ft) Basic Universal Wire-in Harness Kit. Includes Waterproof USB cap, USB programming cable and Software CD (no relays or fuses). The Elite 550 is ideal for basic 4 to 8 cylinder or 12 rotor engine applications. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and ignition channels and a 3 BAR internal MAP sensor. The Elite 550 ECU is powered by the Elite Software Programmer (ESP) a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package. 1 to 8 cylinder engines or 1 to 2 rotor engines. Normally aspirated or forced induction. Waterproof Case (IP67) (with USB Cover Fitted). 34 Position AMP connector. 4 x Fuel Injection Outputs Peak And Hold (0-8A Peak / 0-2A Hold). 4 x Ignition Outputs. 2 x Engine Position Inputs with extensive trigger type support. 1 x Digital Pulsed Inputs (Digital inputs only supported). 5 x Digital Pulsed Outputs. 2 x Analogue Voltage Inputs. 1 x Throttle Position Input. 1 x Coolant Temperature Input. 1 x Air Temperature Input. 1 x CAN Bus communication for Haltech CAN Expansion. Internal 3Bar Map Sensor rated up to 200kPa of Boost (2bar/29psi). ESP Calibration Software Intuitive and easy to use. Closed Loop O2 Control. ECU comes fully enabled, no additional charges for advanced features. Sequential, semi sequential, batch or multipoint injection patterns. Distributor ignition systems, multi-coil systems or Haltech Multiplex CDI systems. Manifold Absolute Pressure (MAP) or. Mass Air Flow (MAF). 4 x Current controlled injector drivers, high or low impedance injector compatible. 4 x Over current protected ignition drivers. 5 x Over current protected low side pulsed outputs. 2 x User definable analogue voltage inputs. 1 x Digital Pulsed Input. 3 x Function dedicated analogue voltage inputs. 1 x Coolant temperature. 1 x Air temperature. 1 x Throttle position sensor. 2 x Engine position inputs with extensive trigger type support. 1 x 3 BAR internal MAP sensor. 1 x CAN Bus communication for Haltech CAN expansion. 1 x USB connection for programming. Founded by Racers and for Racers. We are here to provide you with help for all your performance needs! -Customer service around the clock. As racers ourselves we know the struggles of searching for a place you can trust and depend on. With over 15 years in the industry we have done drag racing, engine building, dyno tuning and much more which has helped us along the way in order to provide the best customer service possible and give you some of the answers you may need when debating on what product will be better suited for your build. Feel free to message us with any inquiries. A Wholesale program is available for Businesses. Message us for Details! Virgin Islands and any other U. Territory is by the US Postal service. Additional costs may apply. International orders are generally delivered within 7 days from date of order. Extended regions may require up to 14 days to be delivered. The item “Haltech HT-150402 Elite 550 ECU +2.5m (8 ft) Basic Universal Wire-in Harness Kit” is in sale since Friday, February 1, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “ostarmotorsportsosm” and is located in Orlando, Florida. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Haltech
• Manufacturer Part Number: HT-150402

Diagnostics Tools Performance Products Tuning Equipment and more Includes access to our technical experts and Tech support! Haltech Elite 550 Ecu + 2.5m (8ft) Premium Universal Wire-in Harness Kit. The Elite 550 is ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and ignition channels and a 3 BAR internal MAP sensor. The Elite 550 ECU is powered by the Elite Software Programmer (ESP) – a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package. 1 to 8 cylinder engines or 1 to 2 rotor engines Normally aspirated or forced induction. Waterproof Case (IP67) (with USB Cover Fitted) 34 Position AMP connector 4 x Fuel Injection Outputs Peak And Hold (0-8A Peak / 0-2A Hold) 4 x Ignition Outputs 2 x Engine Position Inputs with extensive trigger type support 1 x Digital Pulsed Inputs (Digital inputs only supported) 5 x Digital Pulsed Outputs 2 x Analogue Voltage Inputs 1 x Throttle Position Input 1 x Coolant Temperature Input 1 x Air Temperature Input 1 x CAN Bus communication for Haltech CAN Expansion Internal 3Bar Map Sensor rated up to 200kPa of Boost (2bar/29psi) ESP Calibration Software Intuitive and easy to use User definable tables Closed Loop O2 Control ECU comes fully enabled, no additional charges for advanced features. Sequential, semi sequential, batch or multipoint injection patterns Distributor ignition systems, multi-coil systems or Haltech Multiplex CDI systems Load sensing by: Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF). Inputs and Outputs: 4 x Current controlled injector drivers, high or low impendance injector compatible 4 x Over current protected ignition drivers 5 x Over current protected low side pulsed outputs 2 x User definable analogue voltage inputs 1 x Digital Pulsed Input 3 x Function dedicated analogue voltage inputs: 1 x Coolant temperature 1 x Air temperature 1 x Throttle position sensor 2 x Engine position inputs with extensive trigger type support 1 x 3 BAR internal MAP sensor. Communications: 1 x CAN Bus communication for Haltech CAN expansion 1 x USB connection for programming. Tuner Tools provides direct support for our customers on every product we sell. We use and install all the products we sell and our technical sepcialsts would be happy to assist you. Don’t know which part fits your needs? Contact Tuner Tools and we our sales and technical staff will get you exactly what you need! Items must be in sealed original packaging and in new condition. We would be glad to assist you. The item “Haltech Elite 550 ECU + 2.5m (8 ft) Premium Universal Wirein Harness Kit” is in sale since Monday, October 10, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “tunertools” and is located in Columbus, Ohio. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Panama, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Canada.

• Part Brand: Haltech
• Country/Region of Manufacture: Australia
• Manufacturer Part Number: HT-150404
• Brand: Haltech
• Warranty: Yes
• Country of Manufacture: Australia

Haltech E6x ECU with wiring harness. Originally setup for a 4age but can be reconfigured to suit any application and comes with a Apexi rsm. Sent with Australia Post Standard. In good working order as per photo. The item “Haltech E6x ECU with long length wiring harness 4age Apexi RSM” is in sale since Tuesday, April 21, 2020. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\ECUs, Chips, Cruise Control\ECUs”. The seller is “shortyha78″ and is located in Toowoomba, QLD. This item can be shipped worldwide.

• Brand: Haltech