Wire Wiring Harness

For BMW 5′ F07 F10 F18 Adaptive Xenon Headlight Internal Wiring Harness ECE Pair. Condition : New made in China AFS / Adaptive / AHL / AKL : Yes Light Source : Xenon Standard: ECE (European standard) Part location : Left & Right Side Price unit: 1 Pair (Left & Right) Fitment. 520d / 520d ed / 520i / 520Li N20 / 520Li N52N / 523i / 523i N52N / 523i N53 / 523Li / 525d N47S1 / 525d N57 / 525dX / 525Li / 528i / 528i N20 / 528i N52N / 528i N53 / 528iX / 528Li / 530d N57 / 530d N57N / 530dX / 530i N52N / 530i N53 / 530Li / 535d N57S / 535d N57Z / 535dX / 535i / 535iX / 535Li / 550i / 550iX / Hybrid 5 / M5 / M550dX. OE number : 63117271907 / 63117271908 / 63117271905 / 63117271906. PNP focuses on car lights and accessories for Jaguar, Land Rover, Porsche, Mercedes-Benz, BMW, Audi, Maserati, Jeep, Bently, Lexus, etc. PNP has more than 3000 square meters warehouse for the original car lights, which holds more than 10,000 lights at the same time. Our major technical engineers have more than 20 years of experience in car lights. Thank you and have a nice day!

0B5 398 048 D. 0B5 398 048 C. 0B5 398 009 D. 0B5 398 009 F. 0B5 398 009 E. 0B5 398 009 A. 0B5 398 009 B. A4/A4 ALLROAD L4 2.0L V6 3.0L V8 4.0L 7-Speed F/AWD 09-ON. A5/A5 CABRIOLET/A5 SB 2.0L V6 3.0L 3.2L V8 4.0L 7-Speed F/AWD 08-ON. A6 3.0L 3.2L 7-Speed F/AWD 11-ON. A7 3.0L 7-Speed F/AWD 10-ON. Q5 2.0L V6 3.0L 3.2L 7-Speed F/AWD 08-ON. Please leave us your full name, your telephone number and detailed address when ordering. We try our best to pack the products as good and safe as possible, so they always arrive in a good condition. 24 months without mileage limitation.

Please note: This product may be available for back-order when not in-stock, Please enquire for lead times. INTERNAL WIRING HARNESS ALLISON TRANSMISSION 29539792 HARNESS – WIRING – 29539792. Internal Wire Harness 7 Solenoid Type 20-Pin Main Connector LCT1000 Allison 03-06 37955B. 29539792 Internal Wire Harness. Genuine Allison Transmission product. Mitchell Powersystems are an authorised Allison Transmission distributor for the UK. Please message us with your transmission serial number to check compatibility. Don’t forget to subscribe to our news letter for additional discounts. You can also place back orders for out of stock items, Please message us for lead times.

Please note: This product may be available for back-order when not in-stock, Please enquire for lead times. Allison Transmission Internal Control Wiring Harness Assembly 29558426. This part is in limited supply at the Allison factory and must be ordered unit-down with a transmission serial number. Connects the control valve to the main wire harness. Allows the TCM to communicate effectively with the control valve. Controls the control valve solenoids. The Control Valve Internal Control Wiring Harness Assembly provides the connecting link between the solenoids and the transmission control module (TCM). The wiring harness is key to relaying information and transmitting power to the TCM. It is essential to the proper operation and functioning of the transmission. Genuine Allison Transmission product. Mitchell Powersystems are an authorised Allison Transmission distributor for the UK. Please message us with your transmission serial number to check compatibility. Don’t forget to subscribe to our news letter for additional discounts. You can also place back orders for out of stock items, Please message us for lead times.

Clothes, Shoes & Accessories. Home, Furniture & DIY. Car Parts & Accessories. Car Tuning & Styling. In-Car Technology, GPS & Security. ATV, Side-by-Side & UTV Parts. Clothing, Protective Gear & Merchandise. Car Care, Utility & Trailers. Garage Equipment & Tools. Oils, Fluids & Lubricants. View all shop categories. Jaguar Genuine Gearbox Internal Harness Wiring Loom Cable Wire Fits XJ LNC3380AA. This is part 4 on the illustration. ASK US A QUESTION. Genuine OEM LNC3380AA – Jaguar Gearbox internal harness (LNC3380AA) part for XJ 1998 – 2003 (from 812317 To F59525) Classic. XJ 1998 – 2003 (from 812317 To F59525) Classic. A signature will be required upon receipt. We at Jaguar Land Rover Limited want you to be completely happy with your product. It has been designed and manufactured with as much care, attention to detail and quality control, as our vehicles. Supplying genuine OEM parts for Classic Jaguar vehicles that have been out of production for 10 years or more. We use original drawings and tooling, often by the original suppliers to manufacture quality parts to the precise specifications to ensure 100% authenticity. Operating from our purpose-built Classic Works facility in Coventry we have accurately recreated iconic Golden Growler badge, original E-Type panelling, and Pirelli P-Zero XJ220 tyres engineered to the finest tolerances. From Daimler Limousine to S-Type & X-Type we have genuine parts available to order online and be delivered direct to your door. We understand the importance of preserving as much as much of your classic vehicle as possible which is why our expert craftsmen and engineers are committed to maintain the unique spirit of a true classic. We supply genuine classic parts to thousands of owners, collectors & enthusiasts worldwide. Tailor made & bespoke. Our tailor made by Jaguar Land Rover service allows you to request one-off bespoke & unlisted from our Classic experts. If you need any technical parts advice please contact one of our CLassic experts who will be happy to help.

Internal Transmission Wiring Harness. Save a bundle here over the cost from a dealership. The item “Ford 5R110W Transmission Internal Wire Harness with connector New OEM! (99619)” is in sale since Thursday, January 26, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Gauges\Individual Gauges”. The seller is “usa.industries” and is located in Bay Shore, New York. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Brand: Does not apply
• Manufacturer Part Number: 3C3Z-7G276AA
• Interchange Part Number: 3C3Z7G276AA 36986 D16431
• Other Part Number: Internal Wiring Harness
• Surface Finish: Brand New
• Part Brand: Original Ford Motorcraft
• Country of Origin (Primary): US
• AKA:: Torque Shift Torq Shift Torqshift 5 Speed
• Fits Vehicles including:: F-150 250 350 450 550 Superduty Super Duty 5 Speed
• Type: Gauge Set

0B5398048 Transmission Solenoid & Internal Wire Harness Repair Kit fit Audi 0B5. 7-Speed WD Clutch Automatic Transmission. A4/A4 ALLROAD L4 2.0L V6 3.0L V8 4.0L 7-Speed F/AWD 09-ON. A5/A5 CABRIOLET/A5 SB 2.0L V6 3.0L 3.2L V8 4.0L 7-Speed F/AWD 08-ON. A6 3.0L 3.2L 7-Speed F/AWD 11-ON. A7 3.0L 7-Speed F/AWD 10-ON. Q5 2.0L V6 3.0L 3.2L 7-Speed F/AWD 08-ON. Message us for more information. (we speak spanish too). If you are interest in other differents transmission parts (TOYOTA, NISSAN, BMW, CHEVROLET, VOLKSWAGEN, FORD, CVT ETC) just ask by message. The item “0B5 DL501 Audi Transmission Solenoid & Internal Wire Harness Repair Kit” is in sale since Saturday, February 27, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Automatic Transmission & Parts\Automatic Transmission Parts”. The seller is “ardo1910″ and is located in Opa-Locka, Florida. This item can be shipped worldwide.

• Brand: Audi
• Other Part Number: 0B5 Mechatronics Repair Kit
• Interchange Part Number: 0B5
• Fitment Type: Direct Replacement
• Manufacturer Part Number: OB5398048
• Drive Type: AWD
• Surface Finish: New Original Parts
• Country/Region of Manufacture: Germany

I have modify a new EW 7975 harness for a battery in the seat post to get rid that the ugly Di2 battery on the frame. If you’re building a new Di2 bike this is a clean way to finish off the build. This kit includes a internal modified harness, seat post battery, 2 grommets, 4 shrink sleeve, plug removal tool, and harness. Please indicate size and type of frame at checkout. This modified version can be custom build to any buyers special. Special hard to fit frames like some Look, Cervelo, Felt. And any custom frame… Just tell me what length for any section and I’ll make it. DOES NOT REQUIRE YOU TO REMOVE THE SEAT POST TO RECHARGE THE BATTERY! It charges through the harness via. FD/RD(4pin) harness plug, it can also charge any standard Shimano battery without removing the battery, so if you have another bike with the standard Di2 battery you can charge with this charger as well. If you are looking for Ultegra see my other listing. New size battery is a smaller round battery 800mah, will last 5-7 months on one charge 40 grams, 0.748″ (19mm) diameter x 3.6 ” battery can be placed anywhere in the frame, seat tube, down tube, doesn’t matter where you place the battery since it does not need to be removed to charge. High discharge rate capacity. 7.4V 650mAh 14500 li ion battery. Discharge from 4.2V to 3.0V at 0.2C mA. Charge with constant current 1C to 4.2V, then charge with constant voltage 4.2V till charge current is less than 0.01C. 3.0 V, the over-discharge detection voltage of PCM. Charging, 0°C 45°C ; 65±20%RH. Storage for a long time(>3 months) and the storage condition shall be. Charger for 7.2V/7.4V Li-ion or Li-Polymer rechargeable battery Pack connected by 2 cells in series. Automatic stop after full charged. Light is green: power on (standby) or full charged. Light is red: in charging. DC 8.4V 500mA Max. This battery will fit in all 26.8 seat post AND LARGER. If you can fit a AA battery in your post with a little wiggle room, than this battery will fit. I also do custom installs on non Di2 specific frames using a complete internal harness, if you need my service just ask. If you need a complete internal harness with this option, with the battery in the seat post (see my other listing). I have an option for just the battery in the seat post if you already have a bike with an internal harness (see my other listing for just the cable). Note: wire and connector color varies, depending on what I have in stock. To install the battery. Apply electrical tape around the battery so it fits snug inside your seat post (see pictures). Push it in I provided zip-tie around the battery for removal see pic. Plug the battery connector into the seat tube cable coming out the top of the seat tube in the frame. Put the seat post back in the bike, and your ready to ride. Seat post not included. Battery can only be charged through the harness! Your kit will arrive soon and the battery is fully charged, but some time next year it will need to be recharged please follow these instructions, and always remember to unplug both front and rear derailleurs when charging just to be safe. Plug the charger plug into the front junction plug of the harness if your charger plug has 5 pins, if it has 4 pins it plugs into the rear derailleur. Your kit will arrive soon and the battery is fully charged, but some time next year it will need to be recharged please follow these instructions, for EU buyers due to the unstable 240ac power systems. Always remember to unplug both front and rear derailleurs, or use a surge protector when charging just to be safe. The light on the charger will be red when charging, green when charged, 60-90 minutes. To check the battery level. Press and hold either shifting switch for 0.5 seconds or more. You can check the amount of battery charge remaining using the. Battery indicator on top of junction (A). 100 % Illuminates green (for 2 seconds). 50 % Flashes green (5 times). 25 % Illuminates red (for 2 seconds). 0 % Flashes red (5 times). When the battery charge is low, first the front derailleur will stop operating, and then the rear derailleur will. When the battery is fully spent, the derailleurs will stop at the positions where they were last. If the battery indicator is illuminated red, it is recommended that you recharge the battery as. As is the case with ALL Lithium-ion rechargeable batteries running them completely dead can damage the battery, including the OEM Shimano battery. If this happens it may not be possible to charge the battery without removing it, and although it MAY be possible to revived the the battery, the cells may still be damaged, and the battery may run dead in a matter of days… So it is your responsibility to check your battery and recharge it before it goes completely dead. Nternational Buyers Please Note. The item “Shimano Dura-Ace Di2 7970 EW-7975 Modified Internal Wiring Seat Post Battery Kit” is in sale since Tuesday, October 27, 2020. This item is in the category “Sporting Goods\Cycling\Bicycle Components & Parts\Electric Bicycle Components”. The seller is “eapathome” and is located in Altadena, California. This item can be shipped worldwide.

• Battery Type: Lithium Ion (Li-Ion)
• Compatible Brand: Shimano
• Color: Black
• Part Type: Harness
• Brand: Di2diy
• Set Includes: Seatpost Battery

One new 1963 Chevrolet Impala Belair Biscayne V8 Forward Light Harness with 283, 327,409 modified for internal regulated alternator. Modified for internal regulated alternator. Mounted on the driver side. 1986 and earlier type Si V-Belt alternators. Will work with “1 wire alternators” (do not use the exciter two terminal plug)(just connect thick red wire to back post). Harness has connections for headlights high and low beam. Front parking lights/turn signals. Horns, horn relay connections. Alternator ground wires on radiator support etc… Connects into the bulkhead connector/fuse box closest to the motor. The connection closest to the driver fender is for the engine harness. Wiring harness has exact colors, lengths of wires, plastic clips and wrappings as original. Made in the USA. Fits: 1963 Chevrolet Impala Belair Biscayne with 283, 327, 409. Modified for internal regulated alternator 1986 and earlier Si type alternators. All models 2 and 4 Door Hardtop Sedan Wagon SS Super Sport and Convertible. Per California Prop 65 Law we are required to put the following warning on all our listings. This product can expose you to a chemical known to the state of California to cause cancer or reproductive harm. The item “1963 63 Chevy Impala Forward Front Light Wiring Harness Internal Regulated” is in sale since Monday, October 29, 2018. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “24kaccents” and is located in Niagara Falls, New York. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Surface Finish: Wiring Harness
• Manufacturer Part Number: CF50142DI
• Brand: AAW
• Warranty: Yes
• Placement on Vehicle: Front
• California Prop 65 Warning: This product can expose you to a chemical known to the state of California to cause cancer or reproductive harm

New in package, replacement wire harness for 20-150 hp Mercury outboard motor applications as detailed in the chart below. Harness exits through the side of the cowling. For more than 30 years, CDI Electronics® has engineered and manufactured top quality marine ignition products. CDI Electronics’ products are designed and manufactured in the United States in Huntsville, Alabama. Replaces Mercury Part #: 37628, 38072, 38920, 39177, 45070, 46285, 46905, 48150, 49370, 52769, 52770, 52771, 52820, 56370, 59741, 52770A 1, 52771A 1, 52771A 2, 84-46463, 84-62534, 84-66055, 84-66055A 1, 84-66297, 84-66297A 1, 84-69236, 84-69236A 1, 84-71443, 84-71443A 1, 84-73826, 84-73826A1, 84-74904, 84-74904A1 Please Note: Motors Listed In Contrasting Color from the 60’s may have used a different securing method for the harness to hold the harness into the lower cowling, modification to the brackets may be required. Fits the Following Mercury Applications. 20 hp, 200 (2 Cylinder). 40 hp, 400 Electric Start (2 Cylinder). 40 hp, 402 Electric Start (2 Cylinder). 40 hp, Electric Start (2 Cylinder). 50 hp, 500 (4 Cylinder). 50 hp, Electric Start (4 Cylinder). 65 hp, 650 (4 Cylinder). 65 hp (4 Cylinder). 80 hp, 800 (4 Cylinder). 85 hp, 850 (4 Cylinder). 90 hp (Inline 6 Cylinder). 95 hp, 950 (Inline 6 Cylinder). 100 hp, 1000 (Inline 6 Cylinder). 115 hp, 150SS (Inline 6 Cylinder). 125 hp, 1250 (Inline 6 Cylinder). 135 hp, 1350 (Inline 6 Cylinder). 140 hp, 1400 (Inline 6 Cylinder). 140 hp (Inline 6 Cylinder). 150 hp, 1500 (Inline 6 Cylinder). We are happy to help you select the proper replacement part for your application but we trust that you have the proper skills, tools and manuals to properly diagnose your particular engine. Please include your engine model and year of manufacture when contacting us. The weight of each item will be added together when you check out. Note: UPS cannot deliver to a P. Please note: While most (about 98%) of 1st Class packages arrive in a timely manner, it has been our experience that about 2% are delayed or misdirected by the Post Office. Under no circumstances will we falsify or undervalue export or declared value documents. If you are returning an item please call for return authorization. Torn, broken, written on, greasy finger prints, etc. We will assist you with the information needed to obtain return authorization. In most cases the item will be replaced at no charge to you. Cheap cheapest low lowest cost price. 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 18hp 20hp 25hp 35hp 40hp. The item “CDI 414-2770 Internal Engine Wire Harness for Mercury Outboard 20-150 Hp” is in sale since Thursday, September 19, 2019. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Outboard Engines & Components\Electrical Systems”. The seller is “wulffe.marine.and.powersports” and is located in Mentor, Ohio. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• California Prop 65 Warning: Warning: This product may contain chemical(s) that are known to the state of California to cause cancer, birth defects or other reproductive harm.
• Specific applications: See item description for application chart
• Manufacturer Part Number: 414-2770
• Brand: CDI Electronics
• Non-Domestic Product: No