Wire Wiring Harness

FOR SALE IS A WIRING PACKAGE FOR FARMALL H. THIS IS FOR ANY MODEL “H” OR “HV” TRACTOR WITH THE REGULATOR MOUNTED ON POST. HERE IS WHAT YOU GET. 51972DA GROUND STRAP 17. 63422DA BATTERY TO SWITCH 38. 63423DA SWITCH TO STARTER 48 (THIS CABLE IS A TAD LONG BUT WORKS GREAT). (IGNITION SWITCH TO COIL OR MAG AND GENERATOR TO REGULATOR). 358314R91 STARTER SWITCH TO AMP GAUGE 26 #10 WIRE. 358311R91 REAR LIGHT CABLE 60. THIS IS NOT AN “OEM” TYPE WIRING PACKAGE…….. IT IS HOWEVER, A VERY NICE PACKAGE. “DOES NOT INCLUDE FUSE OR FUSE HOLDER AND WIRE ON LATER MODELS”. BATTERY CABLES ARE #2 GAUGE. I HAVE MADE THIS PACKAGE UP DIRECT FROM THE FACTORY DIAGRAMS AND EVERYTHING. I ALSO HAVE A PACKAGE FOR THE REGULATOR MOUNTED ON THE GENERATOR HERE. ALSO A PACKAGE FOR FARMALL SUPER A. The item “FARMALL MODEL H WIRING KIT. SER# 501=19233. WITH REGULATOR ON POST. SEE DETAILS” is in sale since Friday, February 24, 2012. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Antique & Vintage Equipment Parts”. The seller is “gstractor1952″ and is located in Farmville, Virginia. This item can be shipped to United States, all countries in Europe, Canada, Australia.

• Model: H HV
• Modified Item: No
• Custom Bundle: No
• Model Year: 1939-52
• MAIN HARNESS: REGULATOR HARNESS
• LIGHT HARNESS: BATTERY CABLES
• REAR LIGHT CABLE: ELECTRICAL SYSTEM
• Type: Wiring Harness
• Equipment Type: Tractor
• Equipment Make: Farmall
• FARMALL H: REGULATOR ON POST
• Part Type: WIRING KIT
• Brand: A&I

I have modify a new EW 7975 harness for a battery in the seat post to get rid that the ugly Di2 battery on the frame. If you’re building a new Di2 bike this is a clean way to finish off the build. This kit includes a internal modified harness, seat post battery, 2 grommets, 4 shrink sleeve, plug removal tool, and harness. Please indicate size and type of frame at checkout. This modified version can be custom build to any buyers special. Special hard to fit frames like some Look, Cervelo, Felt. And any custom frame… Just tell me what length for any section and I’ll make it. DOES NOT REQUIRE YOU TO REMOVE THE SEAT POST TO RECHARGE THE BATTERY! It charges through the harness via. FD/RD(4pin) harness plug, it can also charge any standard Shimano battery without removing the battery, so if you have another bike with the standard Di2 battery you can charge with this charger as well. If you are looking for Ultegra see my other listing. New size battery is a smaller round battery 800mah, will last 5-7 months on one charge 40 grams, 0.748″ (19mm) diameter x 3.6 ” battery can be placed anywhere in the frame, seat tube, down tube, doesn’t matter where you place the battery since it does not need to be removed to charge. High discharge rate capacity. 7.4V 650mAh 14500 li ion battery. Discharge from 4.2V to 3.0V at 0.2C mA. Charge with constant current 1C to 4.2V, then charge with constant voltage 4.2V till charge current is less than 0.01C. 3.0 V, the over-discharge detection voltage of PCM. Charging, 0°C 45°C ; 65±20%RH. Storage for a long time(>3 months) and the storage condition shall be. Charger for 7.2V/7.4V Li-ion or Li-Polymer rechargeable battery Pack connected by 2 cells in series. Automatic stop after full charged. Light is green: power on (standby) or full charged. Light is red: in charging. DC 8.4V 500mA Max. This battery will fit in all 26.8 seat post AND LARGER. If you can fit a AA battery in your post with a little wiggle room, than this battery will fit. I also do custom installs on non Di2 specific frames using a complete internal harness, if you need my service just ask. If you need a complete internal harness with this option, with the battery in the seat post (see my other listing). I have an option for just the battery in the seat post if you already have a bike with an internal harness (see my other listing for just the cable). Note: wire and connector color varies, depending on what I have in stock. To install the battery. Apply electrical tape around the battery so it fits snug inside your seat post (see pictures). Push it in I provided zip-tie around the battery for removal see pic. Plug the battery connector into the seat tube cable coming out the top of the seat tube in the frame. Put the seat post back in the bike, and your ready to ride. Seat post not included. Battery can only be charged through the harness! Your kit will arrive soon and the battery is fully charged, but some time next year it will need to be recharged please follow these instructions, and always remember to unplug both front and rear derailleurs when charging just to be safe. Plug the charger plug into the front junction plug of the harness if your charger plug has 5 pins, if it has 4 pins it plugs into the rear derailleur. Your kit will arrive soon and the battery is fully charged, but some time next year it will need to be recharged please follow these instructions, for EU buyers due to the unstable 240ac power systems. Always remember to unplug both front and rear derailleurs, or use a surge protector when charging just to be safe. The light on the charger will be red when charging, green when charged, 60-90 minutes. To check the battery level. Press and hold either shifting switch for 0.5 seconds or more. You can check the amount of battery charge remaining using the. Battery indicator on top of junction (A). 100 % Illuminates green (for 2 seconds). 50 % Flashes green (5 times). 25 % Illuminates red (for 2 seconds). 0 % Flashes red (5 times). When the battery charge is low, first the front derailleur will stop operating, and then the rear derailleur will. When the battery is fully spent, the derailleurs will stop at the positions where they were last. If the battery indicator is illuminated red, it is recommended that you recharge the battery as. As is the case with ALL Lithium-ion rechargeable batteries running them completely dead can damage the battery, including the OEM Shimano battery. If this happens it may not be possible to charge the battery without removing it, and although it MAY be possible to revived the the battery, the cells may still be damaged, and the battery may run dead in a matter of days… So it is your responsibility to check your battery and recharge it before it goes completely dead. Nternational Buyers Please Note. The item “Shimano Dura-Ace Di2 7970 EW-7975 Modified Internal Wiring Seat Post Battery Kit” is in sale since Tuesday, October 27, 2020. This item is in the category “Sporting Goods\Cycling\Bicycle Components & Parts\Electric Bicycle Components”. The seller is “eapathome” and is located in Altadena, California. This item can be shipped worldwide.

• Battery Type: Lithium Ion (Li-Ion)
• Compatible Brand: Shimano
• Color: Black
• Part Type: Harness
• Brand: Di2diy
• Set Includes: Seatpost Battery

This is a new 1966 GTO rear body tail light wiring harness. This fits 1966 Pontiac GTO coupe and post sedan not convertible or lemans tempest (although we do have in other listings). (Photo may not be of actual item, but to give graphic representation). EXACT REPRODUCTION WIRING HARNESS. Exact reproduction wiring harness made to factory specifications using the factory blueprints. Our wiring harnesses are correct in every detail. Wiring harnesses connect to different electrical components in various locations throughout the vehicle. Often cars have wiring harnesses that have been “hacked” up and are missing correct connectors to plug into factory components, have corrosion or deterioration damage. These are manufactrued to the original blueprint NOS specifications. In order to satisfy the most discriminating enthusiast/restorer, we offer these authentic reproduction wiring harnesses. These harnesses will provide the finishing touch for any original or restored vehicle. They are built using original GM blue prints, cut to the exact lengths to provide a tailored look, and contain the correct type and color wire as well as the correct terminals. For those of you concerned about having your car judged, our reproduction wiring harnesses will pass all judging standards. These harnesses are ready to use just “plug in and go”. These harnesses are for owners who want a properly restored concourse quality vehicle, for owners to want to update old existing wiring, or for those who want to add factory installed options. They will look, fit and perform exactly as original. If you dont see it listed just ask as we are always expanded our inventory for the highest in customer service. 64 65 66 67 68 69 70 71 72 1964 1965 1966 1967 1968 1969 1970 1971 1972 ram air I II 1 2 3 4 III IV V 5judge 326 350 389 400 428 455 muncie saginaw pontiac gto lemans tempest gp g/p grand prix firebird executive catalina ventura bonneville judge. Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “Rear body tail light wiring harness 66 Pontiac GTO 1966 coupe & post” is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Ignition Systems”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.