Wire Wiring Harness

Standalone plug & play wiring harness supplied with a brand new high pressure inline fuel pump. Looms available for both types of ECU’s. Early 5 plug ECU’s known as DDE4’s found in the E46 and E39’s. Later 2 plug ECU’s known as DDE5/6 found in the E60 and X5’s etc.. Compatible with both 2.0 (M47 and 3.0 M57) engines. The loom has the following. ECU plug which plugs directly into your BMW ecu and replaces the original BMW body loom. Choice of BMW or land rover Tdci/puma throttle pedal plug. OBD plug (for diagnostics). Fuel pump plug, roughly 9ft length of wire to allow for universal fitment. It has output wires for an RPM gauge and an oil warning light for the dash. Compatible with auto and manual gearboxes (comes with CANBUS high and low wires for auto gearbox’s). Designed for use with a de-immobilised ecu which I can assist with too. Comes fully labelled up. V’s, sprinters and even boats Etc… The M57 is an increasingly popular engine swap. These looms allow you to run your M57 engine with minimal wiring and are designed to make your life easier when doing an M57 swap. You can have your engine up and running within minutes, on a pallet or in your conversion vehicle. If your planning on using a standalone wiring loom then you’ll need the immobiliser (EWS) removing form your ecu. Once received ill remove the EWS properly via software rather than the old method of fitting emulators which can fail causing the EWS to re-arm. Once your ecu is done ill send it back with the loom. Any questions give me a message thanks. Please state which throttle plug you require on checkout, if unsure leave me a message or give me a call on 07432738429, if no message is left you will receive a loom with a BMW throttle pedal plug.

Standalone plug & play wiring harness to run BMW 2.0(M47) and 3.0 (M57) diesel engines. Looms available for both types of ECU’s. Early 5 plug ECU’s known as DDE4’s found in the E46 and E39’s. Later 2 plug ECU’s known as DDE5/6 found in the E60 and X5’s etc.. The loom has the following. ECU plug which plugs directly into your BMW ecu and replaces the original bmw body loom. Choice of BMW or land rover Tdci/puma throttle pedal plug. OBD plug (for diagnostics). Its has output wires for an RPM gauge, an oil warning light for the dash as well as a Charge light for the dash. Compatible with auto and manual gearboxes (comes with canbus high and low wires for auto gearbox’s). Designed for use with a deimmobilised ecu which I can assist with too. Send me your ecu and I can remove the immo properly with software rather than the old method of fitting emulators which can fail leaving you stranded. Comes fully labelled up. The M57 is an increasingly popular engine swap. These looms allow you to run your M57 engine with minimal wiring and are designed to make your life easier when doing an M57 swap. You can have your engine up and running within minutes, on a pallet or in your conversion vehicle. Any questions give me a message thanks. Please state which loom & throttle plug you require on checkout, if unsure leave me a message or give me a call on 07432738429 thanks.

Premium Material: Standalone wire is made of premium ABS and copper material, high temperature resistant, high toughness and. Excellent Performance: Standalone harness has lower eccentricity and resistance, wear resistant, anti deformation, good electrical conductivity. Strict Standards: Built to greatly quality control standards, professional standalone wiring harness has stable performance and high reliability. Easy Installation: Easy to install, no complicated operation is required, direct replacement, convenient for using, save your time and energy. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

All wi harnesses are long enough to install the PCM under the dashboard (18 inches have been added to facilitate computer installation). All wi harnesses are equipped with high-quality buttonholes (installable on demand). High-quality reinforced terminal, made of high-quality ABS material, and sturdy, not easy to damage. Comes with all the relevant accessories in this package, which is made to meet your needs. Item Type: Standalone Wi Harness Material: ABS. How to Use: 1. Do not disconnect the battery du ignition. Never make any wire in the wi harness short-circuit to the ground (except the grounding wire), this will cause damage to the PCM. 1 x Wire Harness Assembly. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before orde. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

WE also have GEN V 6L80E/6L90E T56 3 wire 4 wire 8L90E 3 wire 4 wire. WARNING:: WARNING: ECU NOT INCLUDED This is a 4 wire. In 2017 is was a split year for 3 wire and 4 wire so please make sure you know which wire you have. This harness is for a car or truck pedal. This harness is also for a 2 wire alternator. We sell alot of different standalone harnesses, If you need a different harness then check out the link below. You can message them and see for your self. We also sell thousands of fuel injectors every year too. APPLICATION: 2014 2017 4 wire GEN V LT1 and L83 / L86 ECOTEC3 ENGINES WITH 6L80E/6L90E AUTOMATIC TRANS PARTS INCLUDED: Complete engine and transmission wiring harness, Instruction Manual Fuse/Relay Box Fuel Pump Control (Relay included) Fan control option wires, Check Engine Light, Speedo output, Tachometer, OBD2 Port Accelerator Pedal and Throttle Body control (DBW setups) IAC and TPS on DBC setups MAF Sensor MAP Sensor Engine Coolant Temp Sensor Alternator Control (2) Upstream Oxygen Sensors Crankshaft Position Camshaft Position Fuel Injectors Coil Packs Automatic or Manual Transmission control Knock Sensors NOTES: These harnesses are designed for retrofitting 14 17 4 wire LT1/L83/L86 GEN V engines with a 6L80E/6L90E automatic transmission into older muscle cars and street rods or newer non-emissions controlled vehicles. 2014 2017 GEN V LT1 and L83 / L86 ECOTEC3 ENGINES WITH 6L80E/6L90E AUTOMATIC TRANS. Complete engine and transmission wiring harness, Instruction Manual. Fuel Pump Control (Relay included). Fan controls (Relays and fuse available seperately KIT-1010). Check Engine Light, Speedo output, Tachometer, OBD2 Port. Accelerator Pedal and Throttle Body control (DBW setups). IAC and TPS on DBC setups. Engine Coolant Temp Sensor. (2) Upstream Oxygen Sensors. Automatic or Manual Transmission control. These harnesses are designed for retrofitting 14 17 4 wire LT1/L83/L86 GEN V engines with a 6L80E/6L90E automatic transmission into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. E92 ECM, T43 TCM (LOCATED IN VALVE BODY OF 6L80E/6L90E TRANSMISSION). 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). Harness comes with a complete install instruction packet. The item “2014-2017 Gen V LT1 / L83 5.3/ L86 6.2 With 6L80E/6L90E 4 wire Standalone Harness” is in sale since Thursday, September 9, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Injection Parts\Additional Fuel Injection Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Modified Item: No
• Custom Bundle: No
• Type: stand alone harness
• Part Brand: HPI
• Manufacturer Part Number: 2014-18 Gen V LT1 / L83 5.3/ L86 6.2 W/ 6L80E/6L90
• PSI: HPI
• Brand: 2014-18 Gen V LT1 / L83 5.3/ L86 6.2 W/ 6L80E/6L90
• Non-Domestic Product: No
• Manufacturer Warranty: 1 Year

WE also have GEN V 6L80E/6L90E T56 3 wire 4 wire 8L90E 3 wire 4 wire. WARNING:: WARNING: ECU NOT INCLUDED This is a 3 wire. In 2017 is was a split year for 3 wire and 4 wire so please make sure you know which wire you have. This harness is for a car or truck pedal. This harness is also for a 2 wire alternator. We sell alot of different standalone harnesses, If you need a different harness then check out the link below. You can message them and see for your self. We also sell thousands of fuel injectors every year too. Complete engine and transmission wiring harness, Instruction Manual. Fuel Pump Control (Relay included). Fan controls (Relays and fuse available seperately KIT-1010). Check Engine Light, Speedo output, Tachometer, OBD2 Port. Accelerator Pedal and Throttle Body control (DBW setups). IAC and TPS on DBC setups. Engine Coolant Temp Sensor. (2) Upstream Oxygen Sensors. Automatic or Manual Transmission control. These harnesses are designed for retrofitting 17-20 3 wire LT1/L83/L86 GEN V engines with a 8L90E automatic transmission into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. E92 ECM, T87TCM Reprogramming. 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). Harness comes with a complete install instruction packet. The item “2017-2021 Gen V LT1 / L83 5.3/ L86 6.2 8L90E 3 wire Standalone Harness” is in sale since Thursday, September 9, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Injection Parts\Additional Fuel Injection Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Modified Item: No
• Custom Bundle: No
• Type: stand alone harness
• Part Brand: HPI
• Manufacturer Part Number: 2014-18 Gen V LT1 / L83 5.3/ L86 6.2 W/ 6L80E/6L90
• PSI: HPI
• Brand: 2014-18 Gen V LT1 / L83 5.3/ L86 6.2 W/ 6L80E/6L90
• Non-Domestic Product: No
• Manufacturer Warranty: 1 Year

SPINDLE MOTOR AND INVERTER VFD. Healthy and beauty machines. Steam generator for bath SPA. Listing for Winit and 4PX. Small Value Product in U. You may also like. Catalytic Converter For 2010 2011 2012 2013 2014 2015 Toyota Prius 1.8L 16649. Polaris RZR TURBO XP Primary Clutch Drive 1323327 1323365 For Polaris Turbo XP. New Set of 6 Diesel Fuel Injectors for Dodge Ram Cummins 5.9L 03-04.5. (Drive by Cable Only) LS1 Engine Manual transmission w/ T56 or non-electric 4.8 5.3 6.0. Product name: Standalone Wiring Harness T56. Compatible with ev1 injector. Package size: 34×23×15cm / 13.4. Gross weight: 2.74kg / 6lb. This harness is compatible with ev1 injector. Moisture-proof, waterproof and explosion-proof. High quality, quick and easy installation. Fit for EV1 fuel injectors only and 3 MAF plug! T56 Manual Transmission Wiring Harness. Locations: California Warehouse: City of Industry, CA. Texas Warehouse: Houston, TX. Kentucky Warehouse: Hebron, KY. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. PaymentShippingReturn policyAbout usContact us. The item “STANDALONE WIRING HARNESS T56 or Non-Electric Tran 4.8 5.3 6.0 1997-2006 DBC LS1″ is in sale since Monday, August 23, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Injection Parts\Additional Fuel Injection Parts”. The seller is “solar.jean” and is located in City of Industry, California. This item can be shipped worldwide.

• Applicable model: Manual Transmission
• Brand: TaiShi
• Compatible Year: 1997-2006
• Country/Region of Manufacture: China
• Engine type: For 97-06 LS1 Engine
• Fitment Type: Performance/Custom
• Fits for: For S1-T56
• Fittings: 1997-2006 Drive By Cable LS1 Engines
• Gross weight: 2.74kg / 6lb
• Manufacturer Part Number: US2021082330
• Material: Metal/Rubber/Plastic
• Model: Standalone Wiring Harness T56
• Modification Description: T56 Manual Transmission Wiring Harness
• Other Part Number: Standalone Wire
• Package size: 13.4×9×5.9″
• Placement on the vehicle: Car Reserved Harness Position
• Type: Transmission Harness LS1-T56