Wire Wiring Harness

Archives for: June 20, 2019

Metra 95-7510 Double Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount

Posted on by
Metra 95-7510 Double Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount

Metra 95-7510 Double Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount
(CHECK SPECIFIC VEHICLE APPLICATIONS AND EXCLUSIONS). FOR USE WHEN REPLACING THE FACTORY OEM RADIO WITH AN AFTERMARKET DOUBLE-DIN RADIO. THIS ITEM IS 100% BRAND NEW! AFTERMARKET RADIO INSTALLATION KIT. NEW (FACTORY SEALED PACKAGING). TO MATCH FACTORY COLOR AND FINISH. AVAILABLE IN TWO FINISHES. HIGH GLOSS PIANO BLACK. DOES “NOT” WORK WITH VEHICLES EQUIPPED WITH CLIMATE CONTROLS. MUST BE EQUIPPED WITH STANDARD A/C AND HEATER CONTROLS. Recently Some Radio Manufacturers started making Double Din Radios with 7 Inch Screens (some slightly smaller). These Double Din Radios are about (7″ W x 4″ H) 7 inches wide by 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without some modifications. Some of these kits have been manufactured for many years before this new size radio became available. As far as we know, none of the Aftermarket Kit Manufacturers are using this new size opening at this time. The Standard Radio Opening for this kit is approximately (6 7/8 in x 3 7/8 in) or (173mm x 98mm). If you have one of these larger radios, you will need to “SAND” or “FILE” the opening of the TRIM RING or BEZEL to make it large enough to clear the “FACE” of your radio. Unfortunately at this time there are no other alternatives that we know of. AN EXPLANATION OF DIFFERENT TYPES OF RADIOS AND COMPATIBILITY. ” NOT COMPATIBLE ” WHEN INSTALLING A FACTORY OEM RADIO OR ATTEMPTING A FACTORY RADIO SWAP. ” COMPATIBLE ” WHEN INSTALLING AN AFTERMARKET DOUBLE DIN RADIO. A DOUBLE DIN RADIO IS ABOUT 7 X 4 INCHES IN SIZE. ” COMPATIBLE ” WHEN INSTALLING (2) STACKED ISO-DIN RADIOS TOGETHER. SEE ISO-DIN DESCRIPTION BELOW, BOTH UNITS SHOULD MATCH DESCRIPTION BELOW. ” NOT COMPATIBLE ” WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITH ” THE USE OF A RADIO SLEEVE OR CAN (USUALLY PROVIDED WITH YOUR RADIO). A SINGLE DIN RADIO IS ABOUT 7 X 2 INCHES IN SIZE AND HAS A METAL SLEEVE AROUND THE FIRST 3 INCHES OF THE RADIO. WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITHOUT ” THE USE OF A RADIO SLEEVE OR CAN, UNIT IS SCREW MOUNTED, MUST HAVE MOUNTING HOLES ON SIDE OF CHASSIS. UNIT IS A SINGLE DIN RADIO ABOUT 7 X 2 INCHES IN SIZE. If you are not sure if your radio will work with this kit. Please use the “ASK A QUESTION”. Link on the bottom of the page. Please include your Radio Brand and Model Number for faster service. METRA TURBO2 95-7510 AFTERMARKET RADIO INSTALLATION DASH KIT. Painted Matte Black to Match Factory Color and Finish. Retains Full Functionality of Factory HVAC Controls. Put Your Own Text within the Factory Display. Heavy Duty ABS Plastic Construction. Before you replace your factory radio with your New Aftermarket Radio, make sure you get the same parts a Professional Installer would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, Dual, Jensen, JVC, Kenwood, Panasonic, Pioneer, Sony, Soundstream, Valor or another stereo, you’ll want to get the right parts with the BEST Fit and Finish. Don’t be fooled by cheap or generic brands, only use Genuine Metra Products. This Aftermarket Radio Install Kit comes with good instructions on removing the Factory Radio as well as installing your New Aftermarket Radio. If you would like a Complete Set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING. Do you have Steering Wheel Controls like Volume, Track and Seek Buttons? Are these used on a daily basis? Maybe during a morning or evening commute? If so, the ASWC-1 Steering Wheel Control Interface might be the perfect addition. It works with most major brands like Alpine, Clarion, Kenwood, Pioneer, Sony and more. Please see the ASWC-1 LISTING. For complete list of brands and details. If you have any questions, kindly use the “ASK A QUESTION”. (1) METRA 95-7510 Radio/Climate Control Housing. (2) Climate Control Extension Harnesses. (4) Plastic Panel Clips. This ITEM ships “FREE” in the U. Protectorates and APO/FPO Addresses. Must have a valid U. We are a U. Although these parts work with many vehicles outside the U. To research whether the part they are ordering will MATCH , FIT , WORK or is COMPATIBLE with their vehicle before purchasing. We suggest you check the online forums for your particular vehicle, normally you will find someone who has already posted on this topic and provided the needed information. We apologize, we cannot join every forum to do this. First Class Package International (Trackable). 8-15 Days (about 3 Weeks). First Class Package International. 8-28 Days (about 4 Weeks). 6-10 Days (about 2 Weeks). 6-15 Days (about 3 Weeks). MAKE OFFER Sometimes you might see a lower price or a sale price. It doesn’t mean your offer will be accepted, but it is a way of having your offer considered. Kindly press the button to make an offer for consideration. If we do not have this button posted on this listing, it means this feature is not available for use at this time. We do our very best to correctly represent all items we sell. Unfortunately, sometimes there may be incidents beyond our control. We realize this can be very frustrating and upsetting, but if you give us a chance, you might be pleasantly surprised to find that there can be solutions to just about any problem. By using the “ASK A QUESTION”. We normally will respond to you within 24 hours or within the next day. You can even call our Customer Service Line at 657.464.0713. Please leave us a message, and we will get back to you as soon as possible. Please describe the problem as throughly as possible, pictures are always helpful, so we can see what you are seeing. We reserve the right to determine whether the part(s) will need to be exchanged or another course of action may be taken to resolve this matter quickly and efficiently. We provide our services as a courtesy for all International Buyers ANYONE OUTSIDE THE U. The item “Metra 95-7510 Double Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount” is in sale since Wednesday, November 9, 2011. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation.
  • Supported Radio Sizes: Double-Din, DDin, 2Din, 2 ISO-Din Stacked Radios
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!
  • Interchange Part Number: Aftermarket Trim Plate & Wiring Harness
  • Color: Painted Matte Black Finish
  • Manufacturer Part Number: Metra 95-7510
  • Other Part Number: Installation Mounting Panel & Wire Interface
  • Brand: Metra 95-7510 CD Player DVD D-Din Adapter Bezel

Metra 95-7510 Double Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount
Metra_95_7510_Double_Din_Radio_Install_Dash_Kit_for_RX_8_RX8_Car_Stereo_Mount_01_jt Tagged: , , , , , , , , .

Harley 70321-48 Complete Panhead 1949-57 Wiring Harness With Wired Switches USA

Posted on by
Harley 70321-48 Complete Panhead 1949-57 Wiring Harness With Wired Switches USA
Harley 70321-48 Complete Panhead 1949-57 Wiring Harness With Wired Switches USA
Harley 70321-48 Complete Panhead 1949-57 Wiring Harness With Wired Switches USA

Harley 70321-48 Complete Panhead 1949-57 Wiring Harness With Wired Switches USA
This will take the soldering work out of installing your new harness if you are not confident in your soldering skills in re-wiring your switches. This harness is correct for use with the new seat post terminal box introduced in 1948 and the terminal plate under the tin on the Hydra-Glide front end. We do sell a wiring kit for you 1948 Panhead owners which is all the correct wires for the spring forks which you would also use if you have one of the rare 1949 springer Panheads. This is everything you need from nose to tail to wire your bike. If you are re-wiring your tail lamp, you will need to solder two copper ends and that’s it. If that’s not to your liking, we offer a tail lamp wire kit with the bakelite terminal plate and with the copper terminals already soldered on, just let us know if you want to add that to your order or if you want to add wiring clips. We also sell the harness by itself, the dimmer and horn switches, as well as complete wiring clip kits to finish out your installation. We will be adding kits complete with the clips in the near future. If you don’t see them, just ask. Includes everything you need to wire up your H-D from nose to tail. Used on the following. We work with a small and select group of vendors and dedicated craftsmen to bring you the very best restoration and repair parts for 1915 to 1984 Harley-Davidson motorcycles. We also offer a huge collection of restoration quality plain head, CP-1038, & CP-1035 bolts; fillister head & round head screws; correctly machined nuts & washers; fuel & oil lines; wiring harnesses; handlebar switches; air cooled spark plugs; clips, clamps, and ties in cadmium, parkerized, zinc, chrome, and raw finishes. The item “Harley 70321-48 Complete Panhead 1949-57 Wiring Harness With Wired Switches USA” is in sale since Wednesday, November 22, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “blarneyrubble104″ and is located in Cimarron, New Mexico. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Surface Finish: Cloth covered wiring asphalt looms chrome housings
  • Manufacturer Part Number: 70321-48 71800-26A 71840-29
  • Brand: Cimarron Cycle Works
  • Warranty: No

Harley 70321-48 Complete Panhead 1949-57 Wiring Harness With Wired Switches USA
Harley_70321_48_Complete_Panhead_1949_57_Wiring_Harness_With_Wired_Switches_USA_01_hxf Tagged: , , , , , , , , .