Wire Wiring Harness

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 94 -’97 LT1/LT4 Drive by Cable Standalone Wiring Harness. Application’94 -’97 LT1/LT4 Engines with Mechanical Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’94 -’97 LT1/LT4 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 96 -’97 LT1 Engines require’94 -’95 LT1 PCM (Service Number’051), contact. Note that the’96 LT1 PCM (Service Number’399) will work with this harness, however, PSI does not tune these model year PCMs. Harness is designed to use 96′-97′ single connector ignition coil, which is an improved design over the 92′-95′ style (DELCO# D-577). Harnesses are available for 4L60E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto” is in sale since Friday, March 02, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: HAR-1006
• Warranty: Yes
• Part Brand: PSI

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 94 -’97 LT1/LT4 Drive by Cable Standalone Wiring Harness. Application’94 -’97 LT1/LT4 Engines with Mechanical Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’94 -’97 LT1/LT4 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 92 -’97 LT1 Engines require’94 -’95 LT1 PCM (Service Number’051), contact. Note that the’96 LT1 PCM (Service Number’399) will work with this harness, however, PSI does not tune these model year PCMs. Harness is designed to use 96′-97′ single connector ignition coil, which is an improved design over the 92′-95′ style (DELCO# D-577). Harnesses are available for 4L60E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E” is in sale since Monday, June 06, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: HAR-1005
• Warranty: Yes
• Brand: PSI

Please specify the year, make and model of the car the engine came from. Once every sensor is plugged in, you will have 3 wires to hook up (Battery feed, Ignition feed and ground). It is built in the U. With brand new OEM Ford connectors, 260 degree automotive grade GXL wire (quality automotive fireproof wire with thicker insulation than TXL wire). This harness is properly fused with quality relays. Harness can be used with long tube headers or stock exhaust manifolds. Harness is designed to mount the ECM under the dash (42 inches of wire from the back of the motor). Harness can be used with 5 speed manual, AOD, or any Non-computer controlled transmission. EGR eliminator is included and comes pre-installed. It will work with any performance upgrades or engine diagnostic tool designed for the Mustang 5.0L engine. This harness is made for the H. Firing order/Cam (1-3-7-2-6-5-4-8), but can be changed for Non-H. System includes: complete instructions, an assortment of 300 degree F wire loom, harness wrap and zip ties (not bare wire like other harnesses) to give it a finished look and protection. Manufactured by the Detail Zone (a division of Ron Francis Wiring) with RJM Technology. These are built right with quality parts from the correct manufacturers and quality checked for performance. Circuits tested to assure quality. The item “Ford 5.0 EFI universal wiring harness 1989-1993″ is in sale since Saturday, November 15, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “qualityautospecialties” and is located in Blacksburg, Virginia. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan, South africa, New Zealand.

• Warranty: Yes
• Country of Manufacture: United States
• Brand: The Detail Zone
• Manufacturer Part Number: Cobra-75

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 99 -’03 Vortec Drive by Cable Standalone Wiring Harness. With T56 or Non-Electronic Transmission. Application’99 -’03 Vortec 4.8, 5.3, 6.0 Engines with Mechanical Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’99 -’03 Vortec retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. Harnesses designed to use’99 -’04 LS1 /’99 -’02 Vortec PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use Multec fuel injectors (gas), 5 wire MAF sensor, and 24x Crank Sensor. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. If using LS car style intake and EV1 injectors, please order HAR-1012. For harness modification including 4L80E transmission, 5 wire MAF, or Fuel Injector (EV6 Flex Fuel) Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)” is in sale since Saturday, March 03, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: HAR-1019
• Warranty: Yes
• Part Brand: PSI

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 99 -’03 Vortec Drive by Cable Standalone Wiring Harness. Application’99 -’03 Vortec 4.8, 5.3, 6.0 Engines with Mechanical Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’99 -’03 Vortec retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. Harnesses designed to use’99 -’04 LS1 /’99 -’02 Vortec PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use Multec fuel injectors (gas), 5 wire MAF sensor, and 24x Crank Sensor. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. If using LS car style intake and EV1 injectors, please order HAR-1012. For harness modification including 4L80E transmission, 5 wire MAF, or Fuel Injector (EV6 Flex Fuel) Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)” is in sale since Saturday, March 03, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: HAR-1018
• Warranty: Yes
• Part Brand: PSI

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 97 -’04 LS1/LS6 Drive by Wire Standalone Wiring Harness. Application’97 -’04 Corvette / CTS-V LS1/LS6 Engines with Electronic Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’97 -’04 LS1/LS6 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 97 -’98 LS1 Engines require’99 -’04 LS1 PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use EV1 fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. LS1/LS6 Drive by Wire harnesses require Corvette, Z06, CTS-V Throttle Body (GM P/N 17113669) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, 5 wire MAF, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)” is in sale since Friday, March 02, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Toms River, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: HAR-1016
• Warranty: Yes
• Part Brand: PSI

It is designed to plug into the original Ford body harness or aftermarket body harness with 3 wires. It is built in the U. With brand new OEM Ford connectors, 260 degree GXL wire (quality automotive fireproof wire with thicker insulation than TXL wire), 300 degree corrugated wire loom, and 1200 degree fiberglass loom around the exhaust. The harness is properly fused with quality relays. Can be used with long tube headers or stock exhaust manifolds. Harness is designed to mount the ECM (30 inches from the back of the motor) under the dash. It’s pre-wired for Air Conditioning or On-Board-Air compressor. Harness can be used with 5 speed manual, AOD, or any Non-computer controlled transmission. EGR eliminator comes pre-installed. It will work with any performance upgrades or engine diagnostic tool designed for the Mustang 5.0L engine. This harness is made for the H. Firing order/Cam (1-3-7-2-6-5-4-8), but can be changed for Non-H. System includes firewall grommet and complete instructions. Manufactured by the Detail Zone (a division of Ron Francis Wiring) with RJM Technology. These are built right with quality parts from the correct manufacturers and quality checked for performance. Circuits tested to assure quality. The item “Ford 5.0 EFI Mustang/Bronco wiring harness 1989-1993″ is in sale since Friday, April 24, 2009. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “qualityautospecialties” and is located in Blacksburg, Virginia. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan, South africa, New Zealand.

• Warranty: Yes
• Country of Manufacture: United States
• Brand: The Detail Zone
• Manufacturer Part Number: Bronco-75

Complete Standalone Harness DBW. GM LS Series 24x Engines. The Engine Wiring harness is one of the most overlooked and under invested items on a project build, yet one of the most important. We have changed that, but with your budget in mind. Our premium harnesses are guaranteed to be the MOST appealing, BEST fitting, and EASIEST installing harness you have ever installed. We also run each and every harness on an actual motor or dyno before it ships to you to assure everything is 100% tested and built to your specific project. Let the quality of your wiring reflect the quality of your project….. Custom Premium Mesh Wrapped LS Harness. Harness is designed for GM Gen III (24x) engines being used for transplants. 100% Engine/Dyno Run and Tested. Hand made in the USA- We build these harnesses ON AN ACTUAL ENGINE to make it the best fitting harness on the Market. Harness is 100% weatherproof. From the PCM to the fuse box, you can mount the entire unit under the hood or in the car. Easy install, all wires are exact length and labeled for a clean, hassle-free installation. Any Transmission- we will get your project info and build it accordingly (350/400th, 700R4, 4L60/80e, M/T, ect). Made only with highest quality copper strand TXL Automotive Wire. (Not the GXL wire like most companies). Harness has outputs included: Tachometer, VSS-Speedo, Check Engine Light, and OBD2 Diagnostics Port. Here is how it works. Then, we customize a harness to fit your exact needs. Feel free to call anytime- (989) 720-SWAP (7927). We guarantee that the harness will be hassle free, and the easiest harness to install on the market. With person-to-person tech support and Industry leading quality we promise your satisfaction! Please let us know if you have any questions or concerns- we are here to help. The item “LS Standalone Wiring Harness by Swap DBW Dyno Run LIFETIME WARRANTY” is in sale since Thursday, July 16, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “swapspecialtiesperformance” and is located in Oxford, Michigan. This item can be shipped to North, South, or Latin America, United Kingdom.

• Brand: Swap Specialties
• Manufacturer Part Number: G3-HN-R-30-60E
• Placement on Vehicle: Left
• Surface Finish: Nylon Mesh
• Warranty: Yes
• Country/Region of Manufacture: United States

As the owner of a classic, you know adding amenities is very limited with OE wiring. These kits include all you need to modernize and upgrade your classic vehicle and are made in the USA specific for your year, make and model. Now you can easily add power accessories such as windows, fuel injection, air conditioning and more easily. Order your kit today. A replacement headlight switch with internal 25-amp circuit breaker, adjustable length shaft, and custom knob. Standard turn signal flasher, hazard flasher, and horn relay mounted remotely on harness. Upgraded fuse box designed to fit in original location with no modification. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. All necessary attaching hardware included. Many original switch connector bodies – an American Autowire exclusive feature. Steering column connectors will plug directly into most stock 1976-86 Jeep columns and most aftermarket steering columns. Column adapter and terminals also included in the kit. Separate under dash courtesy lamp assemblies are also included for use along with your original dome/interior lighting feeds. New floor dimmer switch is providede for ease of installation. Wire length and connection accommodate original floor mount dimmer switch. Instrument cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. Original terminals, connectors, lamp sockets, and attaching nuts (another American Autowire exclusive) are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as DAKOTA DIGITAL, CLASSIC INSTRUMENTS, AUTOMETER, VDO, and others. A completely assembled “plug and play” OE style weatherproof tail lamp harness using stock Jeep molded connector plugs is included (another American Autowire exclusive). Our longer leads allow for stock or custom routing of the wires. Rear body wiring includes backup, stop and tail, and rear side marker light lead wires all molded into the stock style Jeep T/L plugs. New side marker lamp socket pigtail extensions, license plate lamp lead connection, as well as the fuel tank sender lead connection are also included. Additional power lead wires in included for optional equipment. Complete fog lamp circuit including OE switch connector along with supplied power relay. New high and low beam relay circuits along with supplied relays for halogen headlights. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, electric choke, transfer case warning lamp, under hood lamp, transmission kickdown and electric speedometer (if needed). A heavy gauge alternator feed and fusible link are also included for any typical high output 1 wire or internally regulated “SI” alternator. Connectors supplied for power and tach leads for GM style H. Distributors along with various oil and temp senders. Front lighting includes extra long leads that can be routed for stock or optional appearances. All head light, parking light, directional light and side marker light leads, along with horn, washer pump, brake warning wires and a switched trigger wire for an electric fan relay (usually recommended with AC) are provided. Mating terminals and connectors are also provided for you to complete your custom installation. New 1983-86 windshield wiper switch adapter assembly included (another American Autowire exclusive). 1976-86 motor and pump feeds also included. For customers building a fiberglass bodied vehicle, or one requiring extra grounding capabilities, a vehicle grounding kit is available to accommodate your needs. Made in the U S A! The item “1976-86 Jeep CJ American Autowire Wiring Harness” is in sale since Tuesday, November 17, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “pstbay” and is located in Boonton, New Jersey. This item can be shipped worldwide.

• Manufacturer Part Number: 510573
• Warranty: Yes
• Country/Region of Manufacture: United States
• Brand: American Autowire