Wire Wiring Harness

ULTIMA COMPLETE MOTORCYCLE ELECTRONIC WIRING MODULE HARNESS. This module is perfect for motorcycles using stock HD 85-95 & 96-Ltr hand controls. Detailed Instructions Included & Available Online. Flashers, Relays & Breakers Are All Built In. Flash Works With L. All pins & connectors needed are included. Can be mounted in many different areas of your motorcycle although between split tanks is most common. Will also work for other makes & models of motorcycles. We always strive to give the best description & provide you with the best customer service. Be sure to add me to your FAVORITES list. We will be adding more parts daily. Our inventory is always growing, so if you don’t see it listed here, give us a call. Serious injury, death, and property damage can result from the improper use, control, alteration, or maintenance of motorcycles. The dealer and dealers customers must exercise good judgment in the use, control, alteration, part selection and installation, and maintenance, of motorcycles. Rivercity Cycle Parts has no control over the judgment of others and assumes no responsibility or liability of any nature for the failure of others to use good judgment. The item “ULTIMA COMPLETE MOTORCYCLE ELECTRONIC WIRING MODULE HARNESS HARLEY & CUSTOMS” is in sale since Thursday, February 28, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Other Electrical & Ignition”. The seller is “rivercity-cycle-parts” and is located in Saint Louis, Missouri. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation.

• Manufacturer Part Number: 18-530
• Brand: ULTIMA
• Manufacturer: Ultima
• UPC: Does Not Apply

This harness is a 3 wire MAF and a 1 wire alternator. TH350 TH400 power-glide 700R4 or nonelectric transmission. 1997 – 2004 CORVETTE/CTS-V LS1/LS6 ENGINES (DRIVE BY CABLE ONLY) WITH T56 OR NON-ELECTRONIC AUTOMATIC TRANSMISSION (TH350, TH400, POWERGLIDE, 700R4, 200-4R). Our Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak-proof installation. All of our harnesses are designed with the Highest quality in mind. All Harnesses have extended wiring (ADDED 36 FOR EASY COMPUTER MOUNTING). We have full GM Color Codes. All Factory OE connectors. 100% HANDMADE , right here in the U. The harness comes with a complete install instruction packet. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. MADE IN THE U. The item “1997-2006 DBC LS1 STANDALONE WIRING HARNESS T56 or Non-Electric Tran 4.8 5.3 6.0″ is in sale since Tuesday, September 3, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “templeracingco” and is located in Las Vegas, Nevada. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Modified Item: No
• Custom Bundle: No
• Manufacturer Part Number: Ls1Harenss-T56
• Brand: TRC
• Non-Domestic Product: No

This 1948-56 F1 F100 Ford Truck Power Window Kit INCLUDES SWITCHES AND A COMPLETE PLUGPLAY WIRING HARNESS. Feature –> Reinforced Guide Track Feature –> Adjustable Window Base Feature –> Worm-Gear Driven Bosch Motor Feature –> Custom Mounting Brackets Included Feature –> New Heavy Duty Motor Is Smoother, Stronger, And Quieter Feature –> Multi-Position Brackets Feature –> Heavy Duty, Durable Motors Feature –> Adjustable Track Feature –> Custom OEM Manufactured Feature –> Quick And Easy Installation Feature –> Direct Bolt-in Feature –> Heavy-Duty Regulator Feature –> Wire Harness and Window Switches Not Included Mounting Base holes –> 0.25 Regulator Length –> 25. Top End Speed was founded on 3 principals. Weve worked hard to take care of our customers and treat you the way that we ourselves want to be treated, and that has led to much of our success and Top End Reputation! Over the years we have grown to become one of the industry leaders in Hot Rod, Street Rod, Muscle Car, Vintage Truck, Track & Strip Car, Pro Touring and even Late Model parts and accessories for just about anything you can think of to upgrade your vehicle’s performance. As we look towards the future, we are always researching & adding new technology and advanced products & services to our already loaded parts and accessories inventory! So keep us at the TOP of your list as your one stop performance parts & accessories shop and we will show you why we are at the TOP in the business by offering you TOP END products at the best prices with unmatched TOP END service. 1948-56 F1 F100 Ford Truck Power Window Kit cut-to-fit bolt-in wiring harness. TOP END WINDOW KITS. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1948-56 F1 F100 Ford Truck Power Window Kit cut-to-fit bolt-in wiring harness” is in sale since Monday, March 11, 2019. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Glass”. The seller is “topendspeed” and is located in Tampa, Florida. This item can be shipped worldwide.

• Brand: TOP END WINDOW KITS
• Manufacturer Part Number: ZTP1723555
• eBayMpn: ZTP1723555

Our Pro-Series is ideal for those looking for the best aesthetics, weight savings and reliability. Completely replace your old harness and forget about electrical gremlins. Dress up your bay and take all the pain out of wiring work with this harness. This Wiring Specialties PRO Series harness was designed from the ground-up, specifically for a Universal installation with a 1JZGTE VVTI engine swap. It was developed in house on an actual JDM JZ engine to ensure a perfect fit to all engine sensors. This harness will work exceptionally well in any installation chassis. Anything from a Dune buggy to a Classic car or a race car. The engine fires up with only 2 wires needing connection, along with a fuel line and a good battery. The harness is designed’Tucked’ for a clean installation. The harnesses are built to exceed OEM spec for wire quality and power/ground routing. Wiring Specialties offers a number of options for common performance upgrades for this product. Build your perfect harness by selecting from the available options to the right. Engine: JZZ30 and JZX100 1JZGTE VVTi. Any VVTI 1JZGTE from Chaser/Mark II. Any VVTI 1JZGTE from Soarer/Crown. Sports cars with no OEM body wiring or Non EFI cars. Cars that benefit from EFI wiring run without body wiring connections. 1JZ VVTi Specific Details. Oval alternator connector supplied, unless requested otherwise. New Style Starter, Plastic coolant and Oil pressure connector supplied be default. Standard – batched ignition (chip and coils) is supplied, but sequential NON VVTi is available as an option. External and removable Fuse and Relay block. Relay system installed for proper ECCS ON and OFF operation with ECU Memory retention. Relay block includes the Ignition, Fuel Pump and Fan relays. The Fan relay can be reclaimed as the AC relay. Fuel Pump output wire that connects directly to the pump. Starter trigger wire available in the interior for easy and clean install. Battery power pick-up at the starter for easy and clean install. Ignition input signal from ignition key. Harness is designed to keep the ECU in the cabin and will reach both left and right bulkhead openings. For GM/LQ9 coils upgrade should be used with an aftermarket ECU and run sequentially. Wideband option for ECUs that do not process a raw wideband signal, a controller must be used. Controller like a EUGO or the Haltech CAN wideband. AEM Infinity and ECU Masters ECUs (and other standalone ECUs) are wired for wideband control direct out of the ECU. The LSU 4.2 Version of the Wideband SHOULD be used, as per AEM. AEM Infinity and ECU Masters are pre-wired for Oil Pressure, Fuel pressure, Oil Temp, IAT and MAP sensor wiring directly to the ECU. ApexI PFC conversions ONLY include the IAT sensor on the main harness. The MAP sensor is wired separately, from the PFC box directly to the sensor. OUTPUT connections for ECU tachometer signal, check engine light, engine temp (Nissan dash signal) and alternator charge indicator, reverse lights, speed sensor, NOTE: Output signals supplied ONLY they may need to be conditioned for use with vehicles gauges. Aftermarket gauges may be required. This part of the install REQUIRES connections of the EFI harness to the body/dash/steering column of the car. User must have basic electrical skills to complete this. INCLUDED WITH THIS PRO-SERIES HARNESS. Main Engine and Transmission one-piece tucked harness. 3x VVTi Coilpack connections. 2x knock sensor connections. Boost solenoid wiring (with AEM/Haltech or aftermarket computers). 10-pin igniter chip connector (relocated to inside the car). 2x Cam sensor connector. Idle air motor connector. OEM Oxygen sensor connectors (wideband wiring is not part of the EFI harness, except AEM Infinity 6/8 or ECU Masters or other). 2x ground ring terminals. ECT sensor connector and cluster coolant temp switch connector. Reverse lights sensor connector. OEM oil pressure 1-pin connector. Speed and Tach signal converter connector. ECU Diagnostics mode connector. No traction Control wiring supplied. Printable install instructions with pictures. Turn Key ENGINE START Guarantee. Tech support for our customers 7 days a week. PRO-SERIES HARNESS TECHNICAL SPECS. Plug and Play installs in minutes. NO CORE HARNESS or additional wiring required. OEM wire colors used, where applicable. All sensor signal connection use EM shielded wires. Fireproof fiberglass sleeving used in high-temp sections near the manifold & turbo (-40°C/-40°F to +450°C/+845°F operating temperature). Point-to-Point continuity tested on every wire. Constructed using exact OEM connectors and seals. Made with high temp TXL wire with adhesive shrink tubing (-40°C/-40°F to +125°C/+257°F operating temperature). Wrapped in lightweight nylon loom (-94°C/-137°F to +125°C/+257°F operating temperature). Fully tested after production for an easy plug-and-play replacement. Note: ETCSi Model also available upon request at additional cost. Type of Return Request. The item “Wiring Specialties Engine Tranny Combo Harness 1JZGTE VVTI Universal” is in sale since Friday, June 24, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Charging & Starting Systems\Other”. The seller is “autocat51″ and is located in West Covina, California. This item can be shipped worldwide.

• California Prop 65 Warning: WARNING: The items in this ebay listing are found to have compounds and chemicals known to the State of California to cause cancer, birth defects, and reproductive harm:
• Manufacturer Part Number: WRS-PRO1JZVVTI-UNI
• Brand: WSP

Vintage Whelen WS-295 Electronic Siren PA Amplifier 100w w/ Wire Harness. Vintage Whelen WS-295 Electronic Siren PA Amplifier. With Wire Harness and Mounting Bracket. 100-watt RMS with Single Speaker. 200-watt RMS with Dual Speakers. Please Review Photos for Details. Thank You for Looking… Unless Otherwise Noted as New our items are pre-owned with potential signs of wear from prior usage (see photos). This wear may or may not include the following: scratches, scuffs, dings, dents, discoloration, oxidation, cracks, and/or other minimal damages. If you have any further questions on this item, please send us a message or refer to the attached photos as they show the exact condition and contents of this item. Purchaser will receive exactly what’s shown, Thank You! Why shop with DK Attic Store? DK Attic Store is trusted worldwide for no nonsense, fair, and honest dealings. Our prices and selection are tops. We are happy to be of service! Customer service is the core foundation of all that we do. Our business is based on old fashioned values – honesty and integrity. We sincerely appreciate the opportunity to earn your business. The item “Vintage Whelen WS-295 Electronic Siren PA Amplifier 100w with Wire Harness” is in sale since Thursday, August 29, 2019. This item is in the category “Collectibles\Historical Memorabilia\Firefighting & Rescue\Lights”. The seller is “dkatticstore” and is located in North Tonawanda, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Iceland, Uruguay, Russian federation.

• Country/Region of Manufacture: United States

Trailer Tow Hitch For 05-06 Jeep Grand Cherokee Except SRT-8 w/ Wiring Harness. Custom Fit Trailer Hitch Wiring Harness (Plug & Play) Installation Hardware Installation Instructions. Fits The Following Vehicles. 2005 – 2006 Jeep, Grand Cherokee, Except SRT-8 &##xA0. Max gross trailer weight. Max GTW w/ weight distribution. Fits the following trim levels: Overland Limited Laredo. Any product you return must be in the same condition you received it and in the original packaging. The item “Trailer Tow Hitch For 05-06 Jeep Grand Cherokee Except SRT-8 with Wiring Harness” is in sale since Monday, January 16, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Towing & Hauling”. The seller is “tinavontease” and is located in Las Vegas, Nevada. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Martinique, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay.

• Custom Bundle: Yes
• Receiver Size: 2 in
• Trailer Hitch Type: Receiver Hitch
• Towing Class: 3
• Surface Finish: Black Powder-Coated
• Manufacturer Part Number: 75338 118394
• Placement on Vehicle: Rear
• Brand: Draw-Tite
• Warranty: Hitch-Lifetime, Wiring-1year
• Mounting Hardware Included: Yes

These harnesses are aftermarket recreations of the original harness found on the Honda 350s and 250s manufactured between 1968 and 1973. They conform to all original equipment specifications and and plug and play for your motorcycle. Why settle for old tired wiring when you can have a completely refreshed setup? The item “Honda CB 350 CB350 Twin Wiring Harness Loom” is in sale since Monday, March 25, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Wires & Electrical Cabling”. The seller is “sparckmoto” and is located in Albany, Oregon. This item can be shipped worldwide.

• Modified Item: No
• Manufacturer Part Number: 32100-344-672
• Brand: Honda

Kit is a fast and easy way to make your off road vehicle street legal. Includes the signal lights, a pre-wired harness and all the hardware you need. In no time at all youll have the safety and style of factory-installed signal lights. The turn lights are ultra bright LED’s and can be seen from all angles. The motorcycle horn is compact but loud. Wires for a license plate light are built into the USA made harness. That is sealed and loomed (not just a bunch of rolled up wire). If you have any application or other questions just ask! Maverick – X rs. Maverick Max – MAX X rs. Commander – DPX / XT / X / Limited. PICTURES pic 1&10 – this is the complete kit you are purchasing pic 2&6 – LED signal lights pic 3&4 – details of the kit contents pic 5 – wiring harness pic 7 – example of one signal light installed pic 8 – instructions pic 9 – features of the kit. Wells County Powersports is an authorized dealer for DUX Signal Kits. Sealed Loomed Wiring Harness of automotive quality. We also have DIY turn signal/horn kit supplies. For DIY kits, LED lights, relays/flashers, fuses, horns, and complete turn signal kits. The item “Can-Am Turn Signal Horn Kit LED Lights Sealed Loomed Wiring Harness DUX” is in sale since Thursday, May 4, 2017. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Lighting”. The seller is “wellscountypowersports” and is located in Ossian, Indiana. This item can be shipped worldwide.

• Fits: ATV
• Country/Region of Manufacture: United States
• Manufacturer Part Number: Mirror-Cargo-Dome-Battery-CanAm-Bag-Storage
• Brand: Turn Commander Dux
• Warranty: Yes

Make your 2018 Roxor street legal with this turn signal kit. Show everyone where youre going. This plug-and-play LED Turn Signal Kit for the Mahindra Roxor takes the guesswork out of installing blinkers. The dash-mounted turn signal and hazard switches keeps the steering wheel uncluttered. This high-quality kit is custom-made for the Mahindra Roxor. The front blinkers are two 1.25 amber lights with 6 LEDs each, delivering enough light to be noticed in traffic even in broad daylight. This kit converts the Roxors tail lights to blinkers. A rear power output is included use it for whip lights, LED pods, or license plate lights for your street legal Roxor. No cutting and no crimping! This kit plugs into the OEM brake light harness and uses the factory rear lights. The switches mount in blanks on the dash and a flashing arrow indicates your direction of travel. 2 x 1.25 front amber lights with 6 LEDs. Laser-etched LED turn switch. LED emergency hazard switch. Power output for license plate or whip light (light not included). The item “2018 Mahindra Roxor Plug And Play Signal Kit UTV Blinker Wiring Harness” is in sale since Monday, October 29, 2018. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Lighting”. The seller is “dirt_legal” and is located in Fort Lauderdale, FL. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Grenada, Saint kitts and nevis, Saint lucia, Barbados, Bolivia, Ecuador, Iceland, Cambodia, Cayman islands, Sri lanka, Luxembourg, Martinique, Nicaragua, Oman, Peru, Pakistan, Paraguay, Viet nam, Uruguay.

• Manufacturer Part Number: Does Not Apply
• Placement on Vehicle: Front
• Brand: Unbranded