Wire Wiring Harness

LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS

Posted on by
LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS
LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS
LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS
LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS

LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS
LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS. Perfect for a wide range of applications, the multi-purpose ROK40 is a unique solution to a range of lighting needs – use it as a reversing light, a motorbike handlebar light or even as a work light while camping! Available in a range of beam patterns the new ROK40 utility work light from Lightforce is a handy addition to any vehicle or tool kit. Now available in configurations; spot and ultra flood, this compact multifunction 40w LED light can be used in almost any application! For superior performance, the ROK40 utilises 96% efficient reflectors producing smooth well balanced beam patterns resulting in increased distance, volume and intensity combined with high grade CREE US chipsets and drivers. The 5000k colour temperature will match in with the rest of the Lightforce LED range, allowing a consistently clear, bright and white light for all uses. High pressure cast aluminium body. IP69K Rated to protect against moisture / contaminant ingress. Hard coated, scratch and high impact resistant Polycarbonate lens. Custom fabricated dual injected moulded strain relief connector, fitted to military specification grade cable. Military specification waterproof membrane with mechanical seal. Over, under and reverse voltage protection. Pulse width modulation thermal management circuitry. Available in spot’ & “ultra flood” configurations. 40W (4 x10w CREE chipsets). Input voltage range: 9-36V DC. 50,000+ Hour LED lifespan. Input cable 450mm (17.72). Operating temperature -40°C to 63°C (-40°F to 145°F). Weight 716 grams (25 oz). Harness incorporates a 40 amp relay, fully terminated two pin waterproof Deutsch connector and illuminated switch, with an inline fuse rated at 5 amps. Relay to Deutsch 2 pin connector – 2.3 meters. Relay to battery ring terminals – 1.2 meters. Relay to switch – 1.3 meters. Pin 1: Blue – power out. Pin 2: Red – power in. Pin 3: Black – ground (for LED illumination). 2 x ROK40 LED utility light. 2 x Mounting hardware and fixings. 2 x Wiring harness. 2 x User instructions. The item “LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS” is in sale since Monday, August 13, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Lights, Indicators\Fog/Exterior Lights”. The seller is “lightforceau” and is located in HINDMARSH, SA. This item can be shipped worldwide.
  • Brand: LIGHTFORCE
  • Manufacturer Part Number: 2 X ROK40FF
  • Beam Type: Ultra Flood
  • Features: LED Light

LIGHTFORCE ROK40 FLUSH MOUNT PAIR LED LIGHT 40W (4x10W) 5000K & WIRING HARNESS
LIGHTFORCE_ROK40_FLUSH_MOUNT_PAIR_LED_LIGHT_40W_4x10W_5000K_WIRING_HARNESS_01_qcx Tagged: , , , , , , , , , .

Dash wiring harness with fuseblock 63 64 Chevy Impala Biscayne Bel Air

Posted on by
Dash wiring harness with fuseblock 63 64 Chevy Impala Biscayne Bel Air

Dash wiring harness with fuseblock 63 64 Chevy Impala Biscayne Bel Air
This is a new dash wiring harness with fuse block for 63 & 64 Fullsize Passenger Chevy models. (Impala models use a instrument cluster feed harness which is available separately). Do you have a 1963 or 1964? Do you have a Impala Bel Air El Camino or Biscayne? Do you have manual trans or automatic trans? Do you have back up lamps? Do you have column shift or floor shift? Do you have air conditioning? EXACT REPRODUCTION WIRING HARNESS. Exact reproduction wiring harness made to factory specifications using the factory blueprints. Our wiring harnesses are correct in every detail. Wiring harnesses connect to different electrical components in various locations throughout the vehicle. Often cars have wiring harnesses that have been “hacked” up and are missing correct connectors to plug into factory components, have corrosion or deterioration damage. These are manufactrued to the original blueprint NOS specifications. In order to satisfy the most discriminating enthusiast/restorer, we offer these authentic reproduction wiring harnesses. These harnesses will provide the finishing touch for any original or restored vehicle. They are built using original GM blue prints, cut to the exact lengths to provide a tailored look, and contain the correct type and color wire as well as the correct terminals. For those of you concerned about having your car judged, our reproduction wiring harnesses will pass all judging standards. These harnesses are ready to use just “plug in and go”. These harnesses are for owners who want a properly restored concourse quality vehicle, for owners to want to update old existing wiring, or for those who want to add factory installed options. They will look, fit and perform exactly as original. If you dont see it listed just ask as we are always expanded our inventory for the highest in customer service. 64 65 66 67 68 69 70 71 72 1964 1965 1966 1967 1968 1969 1970 1971 1972 copo yenko nickey ss rs rs/ss super sport ls6 l37 ls5 ls7 l78 350 327 383 400 402 396 427 454. Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “Dash wiring harness with fuseblock 63 64 Chevy Impala Biscayne Bel Air” is in sale since Thursday, August 10, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Interior\Dash Parts”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.
Dash wiring harness with fuseblock 63 64 Chevy Impala Biscayne Bel Air
Dash_wiring_harness_with_fuseblock_63_64_Chevy_Impala_Biscayne_Bel_Air_01_it Tagged: , , , , , , .

11-15 Kawasaki Ninja ZX10R ECU Wiring Harness Rectifier Throttle Bodies Air Box

Posted on by
11-15 Kawasaki Ninja ZX10R ECU Wiring Harness Rectifier Throttle Bodies Air Box
11-15 Kawasaki Ninja ZX10R ECU Wiring Harness Rectifier Throttle Bodies Air Box
11-15 Kawasaki Ninja ZX10R ECU Wiring Harness Rectifier Throttle Bodies Air Box

11-15 Kawasaki Ninja ZX10R ECU Wiring Harness Rectifier Throttle Bodies Air Box
All parts will fit 11-15 ZX10R models. Everything is in perfect working condition. The item “11-15 Kawasaki Ninja ZX10R ECU Wiring Harness Rectifier Throttle Bodies Air Box” is in sale since Friday, December 8, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\CDIs & ECUs”. The seller is “ragingcycles” and is located in Farmington, Michigan. This item can be shipped worldwide.
  • Brand: Kawasaki

11-15 Kawasaki Ninja ZX10R ECU Wiring Harness Rectifier Throttle Bodies Air Box
11_15_Kawasaki_Ninja_ZX10R_ECU_Wiring_Harness_Rectifier_Throttle_Bodies_Air_Box_01_kja Tagged: , , , , , , , , .

WLA/military 1942-1945 forty five 4736-42m Main Wiring Harness

Posted on by
WLA/military 1942-1945 forty five 4736-42m Main Wiring Harness
WLA/military 1942-1945 forty five 4736-42m Main Wiring Harness
WLA/military 1942-1945 forty five 4736-42m Main Wiring Harness

WLA/military 1942-1945 forty five 4736-42m Main Wiring Harness
HIGH QUALITY REPLACEMENT PARTS FOR your harley! The item “WLA/military 1942-1945 forty five 4736-42m Main Wiring Harness” is in sale since Saturday, December 3, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “recordman111″ and is located in Lebanon, Tennessee. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: 4736-42m
  • Brand: Eastern Motorcycle Parts
  • Warranty: Yes

WLA/military 1942-1945 forty five 4736-42m Main Wiring Harness
WLA_military_1942_1945_forty_five_4736_42m_Main_Wiring_Harness_01_yn Tagged: , , , , , , , .

21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire

Posted on by
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire

21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire. We know our products. Always the correct part. 21 pre-wired fuse block will wire your car or truck from headlights to taillights. 17 fuses and 21 circuits. The wires are very long and can be used on almost all vehicles. All wires are labeled every 5 inches so installation is easy. For GM, for Ford and for Mopar installations see photos above. To make installation even easier, the wires are for GM color coded. For GM column connectors are included. The wiring kit includes fuses for. Radio, Coil, Dome Light, Horn, Cigarette Lighter, AC/Heat, backup/Cruise, Fuel Pump. Radio, Turn Signal, Horn, ACC, Wiper, Gauges, Hazard, Fan, Power Window, Power Door Locks, Brake & Headlights. Also Includes Horn Relay and Connector, Turn and Hazard Signals, Dimmer Switch Connector. Circuit Breaker for Headlights, 2 Flashers, 1 Alternator Plug, 2 Ignition Switch Connectors. Other items you might also like. For Ford Transit Land Rover Defender 2.4TDCi 140HP 143HP 752610 Turbo Core Chra. 4340 Steel Conrod For Ford Kent Crossflow H Beam Con Rod Connecting Rod ARP 2000. H-Beam Racing Performance Connecting Rods for Ford Sierra Escort RS Cosworth YB. For FORD FIESTA TDCI 1.4 KP35 Type DV4TD TURBO TURBOCHARGER CHRA 54359700007. Performance Steel Connecting Rod Con Rods Conrod ARP 2000 For Ford Duratec 2.3L. H beam 4340 Con rods for Ford YB Sierra Escort 2.0 16V Cosworth RS500 Conrod x 4. GT2052V turbine for Ford Transit VI mk6 2.4L 140hp 2013 2014 2015 2016 turbo. T3 T4 T04E Universal Turbocharger Kit +Wastegate+Intercooler rebuilding kit. Street Coilover Suspension Kit for Ford Focus Mk II MK2 Volvo C70 MK2 0410. GT3582 Turbo For Ford Falcon BA/BF XR6 FPV F6 & 64mm Pipe Kits & Intercooler 76. Connecting Rod Rods for Ford X Flow Lotus Twin cam 1600 TC Conrods Con Rod CRE. 70 A/R T3 V Band Flange Oil Cooled 500BHP T70 Turbo Turbocharger amd. Will this fit my car? Please make sure you have read through the whole listing and paid attention to note and notice. When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. The item “21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire” is in sale since Saturday, December 15, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Air Intake & Fuel Delivery\Fuel Injection Parts”. The seller is “protuningtools” and is located in Leicester,QYP. This item can be shipped worldwide.
  • Brand: maXpeedingrods
  • Type: Injector Harness
  • Reference OE/OEM Number: 21 Circuit
  • Other Part Number: 17 fuses
  • Applicable Regions: UK, EU
  • Bundle Listing: Yes
  • Brand Type: Aftermarket Branded
  • Warranty: 2 Year
  • Note: No Instruction Included
  • Important Notice: Package Included: Just like the picture
  • Manufacturer Part Number: QFNVDJ

21 Circuit Wiring Harness for CHEVY Mopar FORD Hotrods UNIVERSAL Extra long Wire
21_Circuit_Wiring_Harness_for_CHEVY_Mopar_FORD_Hotrods_UNIVERSAL_Extra_long_Wire_01_tdi Tagged: , , , , , , , , , , .

1970 Ford Mustang American Autowire Wiring Harness

Posted on by
1970 Ford Mustang American Autowire Wiring Harness
1970 Ford Mustang American Autowire Wiring Harness

1970 Ford Mustang American Autowire Wiring Harness
As the owner of a classic, you know adding amenities is very limited with OE wiring. These kits include all you need to modernize and upgrade your classic vehicle and are made in the USA specific for your year, make and model. Now you can easily add power accessories such as windows, fuel injection, air conditioning and more easily. Order your kit today. Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow for high-powered halogen headlights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Original style ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. New ATO fuse box fits the the left of the original bulkhead pass through opening and allows for easy fuse and circuit breaker accessibility. Harness allows for most aftermarket accessories such as: gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! (Exclusive to American Autowire). Complete ignition and turn signal switch jumper harnesses with mating connectors and terminals along with full color instructions that include all of the dash/main harness connections that are unique to the 1970 Mustang installation. Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for adapting to a stock 1969 Ford Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument cluster wiring is designed with a separate “cluster harness disconnect” system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes JME ENTERPRISES, AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead wires with proper focal length sockets, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are also included. New floor dimmer switch is provided and mounts in the stock location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Made in the U S A! The item “1970 Ford Mustang American Autowire Wiring Harness” is in sale since Friday, August 7, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Other”. The seller is “pstbay” and is located in Boonton, New Jersey. This item can be shipped worldwide.
  • Brand: American Autowire
  • Manufacturer Part Number: 510243
  • Warranty: Lifetime Limited

1970 Ford Mustang American Autowire Wiring Harness
1970_Ford_Mustang_American_Autowire_Wiring_Harness_01_nol Tagged: , , , , , .

1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC

Posted on by
1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC
1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC
1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC
1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC
1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC

1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC
1966 – 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal Flasher Harness –> Yes Engine Harness –> Yes Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. Top End Speed was founded on 3 principals. Weve worked hard to take care of our customers and treat you the way that we ourselves want to be treated, and that has led to much of our success and Top End Reputation! Over the years we have grown to become one of the industry leaders in Hot Rod, Street Rod, Muscle Car, Vintage Truck, Track & Strip Car, Pro Touring and even Late Model parts and accessories for just about anything you can think of to upgrade your vehicle’s performance. As we look towards the future, we are always researching & adding new technology and advanced products & services to our already loaded parts and accessories inventory! So keep us at the TOP of your list as your one stop performance parts & accessories shop and we will show you why we are at the TOP in the business by offering you TOP END products at the best prices with unmatched TOP END service. 1966 – 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC” is in sale since Wednesday, June 5, 2019. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Charging & Starting Systems”. The seller is “topendspeed” and is located in Tampa, Florida. This item can be shipped worldwide.
  • Brand: TOP END WIRING
  • Manufacturer Part Number: ZTP1709102
  • eBayMpn: ZTP1709102

1966 1972 Dodge Charger Wire Harness Upgrade Kit fits painless fuse update KIC
1966_1972_Dodge_Charger_Wire_Harness_Upgrade_Kit_fits_painless_fuse_update_KIC_01_jloy Tagged: , , , , , , , , .

Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY

Posted on by
Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY
Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY
Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY
Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY
Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY
Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY

Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY
This is a coil on plug wire harness only. This is a high quality, pre-made wire harnesses for the Evo 4-9. It has connectors for Denso coils and connects right up to the stock Evo connectors for use with a Coil-on-Plug ignition system. We also offer extended length harnesses for cars with a wire tuck (made to order). The wire harness is complete and ready to be installed on your coil-on-plug setup. Check out the other listings for a complete setup or individual pieces for your COP setup. High quality wire sheath. Military Spec Tefzel wire. Pins are professionally crimped. If you have any questions before placing your order send us a message. You can also check out our website for more products and contact information. The item “Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY” is in sale since Sunday, April 9, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups”. The seller is “jdcustomsusa” and is located in Cleveland, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: Does Not Apply
  • Brand: JD Customs USA
  • Warranty: Lifetime

Coil-on-Plug Wire Harness for Evo 4/5/6/7/8/9. High Quality LIFETIME WARRANTY
Coil_on_Plug_Wire_Harness_for_Evo_4_5_6_7_8_9_High_Quality_LIFETIME_WARRANTY_01_kk Tagged: , , , , , , .

Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road

Posted on by
Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road
Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road
Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road
Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road
Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road

Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road
Auto & Motor Light. Strobe Light & Siren. Off Road Light & Bracket. Grow light & Tent. Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road. LED Power: 90W, 15pcs x 5w High Intensity CREE LEDs Beam type: Spot & Flood Combo Operating Voltage: 12V/24V DC Lumen Flux: 9000 lm Waterproof rate: IP 67 Color Temperature: 6000K Working Temperature: -45 +85°C Material: Diecast aluminum alloy housing Mounting Bracket: Stainless Steel Size: 29.2″ x 1.54″ x 1.69 (without bracket) Lifespan: 50,000 Hours. Material: Casting Aluminum Alloy Housing. The suitable design for heating elimination Shakeproof, rustproof, water proof (IP67) High/low temperature resistance Very Low Power Consumption Heavy-Duty LED bulbs, High energy efficiency & stability. All automobiles and devices equipped with a 12V power source. 1 x 90w LED work lamp + mounting kit. Any returning or exchanging items must be in the original package and new condition. Defective products only can be exchanged for the exact same product within 60 days after the date of sale. All our products are 100% brand new , which it has never been used or installed (unless stated otherwise). We do our best to package your items as well as possible and to be as thorough as we can. We will do our best to make sure your problem is solved promptly. We are not responsible for any legal issues that are caused by improper usage of our products. Please verify that these items are legal within your state before placing order. Our products require professional installation and we are not responsible for the installation of the products. Please verify the address on Google map before placing order. US Domestic (Lower 48 States). US Domestic (Expedited, Second Day, Next Day). Extra charge (depending on merchandise). PR, HI, AK, GU, VI, PO Box, APO, FPO. FREE / Extra charge (depending on carrier). The customer is responsible for these charges and they are dependent on each individual country. Please verify your address is accurate and deliverable. Please note UPS ground / Standard does not deliver on Saturday, Sunday, or holidays. If the order is particularly fragile, we may use stickers or tape indicating FRAGILE if required. The average parcel spends less than 48 hours in transit, and deliveries are made every day except Sunday. Was started in Dec, 2011 on a mission to bring quality products at a very competitive price. We are located in Southern California with over 20,000 Sq. XPRITE USA specializes in aftermarket performance parts and accessories. Our goal is to strive for the highest level of customer service to ensure the satisfaction of all our customers. We believe that variety is the spice of life. That’s why you’ll find some of the best deals around on a wide variety of items. You’ll find a great selection of LED strobe light, Led work light, Other LED lights, HID lights, home improvement lights and Outdoor products. We work hard with our suppliers to find the best products, at the lowest prices from brands that you know and trust. Our expert warehouse staff is on hand and ready to process all of your orders and ensure they get to you in the quickest and safest way possible. We welcome your inquiry! The item “Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road” is in sale since Wednesday, January 31, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Light Bars”. The seller is “xpriteusa-ledlight” and is located in Chino, California. This item can be shipped worldwide.
  • Shape: Rectangle
  • Lumens (Light Flux): 9000
  • Bulb Type: LED
  • Lens Color: Clear
  • Wattage: 90 W
  • Interchange Part Number: SUV 4WD 4X4 UTE ATV Pickup Truck Jeep Tractor LED
  • Length: 29 in
  • Bulb Color: Clear
  • Beam Type: Spot Flood Combo
  • Mounting Hardware Included: Yes
  • Type: Combo Work Lamp
  • Manufacturer Part Number: WL-C7-90SS
  • Placement on Vehicle: Front
  • Other Part Number: Black 5D Series CREE
  • Brand: Xprite
  • Color Temperature: 6000K
  • Warranty: 1 Year
  • Voltage: 12V

Xprite 30in CREE LED Work Light Bar 90W Super Bright for ATV UTV SBS Off-Road
Xprite_30in_CREE_LED_Work_Light_Bar_90W_Super_Bright_for_ATV_UTV_SBS_Off_Road_01_mfbd Tagged: , , , , , , , .

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

Posted on by
1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport
1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport
1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport
1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport
1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport
1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport
Hello, This listing is for one new 1968 Chevrolet Camaro RS Coupe/HT Rear Body Light Wiring Harness with under dash courtesy lights. This is the main wire harness for the rear of car. Connects under dash on driver side runs down driver side door sill to rear of rear. Has connections for the under dash connector, dome light lead, tail light sockets, back up light connectors, etc…. Has all the correct colors, connectors, lengths, clips, vinyl and cloth wrapping as original. Highest quality on the market. Made in the USA! Fits: 1968 Camaro RS Coupe/HT Rally Sport with under dash courtesy lights. Thanks and hope to have your business. The item “1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport” is in sale since Friday, November 27, 2015. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “24kaccents” and is located in Niagara Falls, New York. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Surface Finish: Wiring Harness
  • Manufacturer Part Number: CA80069
  • Placement on Vehicle: Rear
  • Brand: American Auto Wire
  • Non-Domestic Product: No
  • Warranty: Yes

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport
1968_Camaro_Coupe_RS_Rear_Body_Tail_Light_Wiring_Harness_Rally_Sport_01_ghpm Tagged: , , , , , , , , , .