Wire Wiring Harness

Power Plus 13 Wiring Harness Kit American Autowire Part Number: 510004 Yogi’s Inc. This Item is In Stock in our Monticello, Iowa Warehouse Now! Power Plus 13 Wiring Kit. Nylon 6/6 Panel Components. Fuse box is best mounted in an under dash position. GXL/XLPE (-60 F°- 275 F°) Heat Resistant Wiring. Horn relay, floor dimmer and courtesy light connections. Standard brake light connections with third brake light. Heavy gauge main fuse panel feed wire. Complete engine compartment wiring for lighting and engine management. Complete instrument cluster wiring for electric gauges. Indexed headlight switch connection. Complete rear body wiring for lighting and fuel tank. Ground leads for headlight switch and all front and rear lighting. Heavy gauge alternator, main power, and starter solenoid wires. Alternator leads for one wire and GM internally regulated SI series alternators. Heat and air conditioning lead wires as well as accessory radio and battery clock leads. Long ignition, accessory, and battery leads for the ignition switch. A separate alternator exciter lead wire is wired in. Plug-in steering column connector for 1969 and later GM columns. Original columns can also be wired by using the supplied mating connector and terminals. Headlight and floor dimmer switches. Connectors for GM column mounted ignition switches and HEI distributors. Color schematics and easy to understand installation instructions included. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “American Autowire 510004 Power Plus 13 for Universal Wiring Harness” is in sale since Monday, September 15, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 510004
• Other Part Number: AAW510004
• Warranty: Yes
• Part Brand: American Autowire
• Country of Manufacture: United States

Complete Wiring Harness Kit for 1970-73 Camaro. This Item is In Stock in our Monticello, Iowa Warehouse American Autowire Part Number: 510034 Yogi’s Inc. Complete Wiring Kit – 1970-73 Camaro For. Replacement headlight switch with internal 30 amp circuit breaker included. Retention collar nut, adjustable length shaft, and custom knob are also included. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box designed to fit in original location. All required hardware supplied. New ATO fuse allows easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all aftermarket accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies! (Exclusive to American Autowire) 5. Steering column connectors will plug directly into most aftermarket steering columns as well as 70-73 and later GM columns which utilize stock GM turn signal switches The original column can also be wired by using the supplied mating connector and terminals. Along with wiring for your original dome/interior lighting, we have included separate underdash light sockets. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. All original terminals, connectors (exclusively from American Autowire), and light sockets are also supplied for original cluster gauges. However, the best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, COVAN CLASSICS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly is designed to plug into the main harness in the original connector bodies. Flexibility in harness design allows for original or custom routing. Rear body wiring includes backup light wires and mating connectors for backup light leads. License plate lead, connectors, and terminals included. Fuel tank sender wire and terminal included. Youll find all the original style light socket pigtails packed into every aspect of this system making it the most complete system of its type in the industry! New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. Original bulkhead connector for the engine and front light wiring is included and ready for installation. Original routing of the new harness without any body modifications! Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This wiring kit is IN STOCK in our Monticello, IA Warehouse. This kit ships in the USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “American Autowire 510034 1970-73 Chevy Camaro Classic Update Wiring Harness” is in sale since Monday, September 15, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 510034
• Other Part Number: AAW510034
• Warranty: Yes
• Part Brand: American Autowire
• Country of Manufacture: United States

1967 1968 Camaro Classic Update Wiring Harness Kit. American Autowire Part Number: 500661 Yogi’s Part Number: AAW500661. This Item is In Stock in Monticello, Iowa. This Classic Update Series wiring kit from American Autowire is for the 1967-68 Camaro. It includes the following features. Replacement headlight switch with internal 30 amp circuit breaker included. Retention collar nut, adjustable length shaft, and custom knob are also included. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box designed to fit in original location. All required hardware supplied. New ATO fuse allows easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches The original column can also be wired by using the supplied mating connector and terminals. Original Dash Panel instrument Cluster Connector. Along with wiring for your original dome/interior lighting, we have included separate underdash light sockets. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. All original terminals, connectors (exclusively from American Autowire), and light sockets are also supplied for original cluster gauges. However, the best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, COVAN CLASSICS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. New ignition switch is included with indexed connector. Additionally the system comes with column mounted ignition switch connectors for adapting late model columns (67-68 models). Rear body harness assembly is designed to plug into the main harness in the original connector bodies. Flexibility in harness design allows for original or custom routing. Rear body wiring includes backup light wires and mating connectors for backup light leads. License plate lead, connectors, and terminals included. Fuel tank sender wire and terminal included. You’ll find all the original style light socket pigtails packed into every aspect of this system making it the most complete system of it’s type in the industry! New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. Original bulkhead connector for the engine and front light wiring is included and ready for installation. Original routing of the new harness without any body modifications! Original boots for every location needing protection!! Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “American Auto Wire 500661 1967-68 Chevy Camaro Classic Update Wiring Harness” is in sale since Wednesday, February 4, 2015. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 500661
• Other Part Number: AAW500661
• Warranty: Yes
• Part Brand: American Autowire
• Country of Manufacture: United States

American Autowire 1964 – 1966 Mustang Classic Update Wiring Harness Kit. American Autowire Part Number: 510125 Yogi’s Part Number: AAW510125. This Item is In Stock in Monticello, Iowa. This Classic Update Series wiring kit from American Autowire is for the 1964 – 1966 Mustang. This kit includes the following features. Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered Halogen headlights. Complete wiring for all running lights, brake lights and directional lights, and license lights and third brake lights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. New ATO Fusebox fits in center of the firewall away from heater and A/C ducts and allows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for running a stock Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead and ground wires with proper focal length light sockets, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Color schematics and easy to understand installation instructions included. This kit has the wrong part number in our #29 the incorrect part # is AAW550125. Please note: Classic Update Kits do not support Ammeters. This kit will not work with factory A/C. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “American Auto Wire W510125 1964-66 ford Mustang Classic Update Wiring Harness” is in sale since Friday, September 5, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 510125
• Other Part Number: AAW510125
• Warranty: Yes
• Part Brand: American Autowire
• Country of Manufacture: United States

1967 1968 Mustang Classic Update Wiring Harness Kit. American Autowire Part Number: 510055 Yogi’s Part Number: AAW510055. This Item is In Stock in Monticello, Iowa. This Classic Update Series wiring kit from American Autowire is for the 1967 1968 Mustang. It includes the following features. Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered Halogen headlights. Complete wiring for all running lights, brake lights and directional lights, and license lights and third brake lights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted in harness. New ATO Fusebox fits in center of the firewall away from heater and A/C ducts and allows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for running a stock Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead and ground wires with proper focal length light sockets, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Color schematics and easy to understand installation instructions included. Please Note: Classic Update Wiring Kits do not support Ammeters This kit will not work with factory A/C. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This Wiring Kit is IN STOCK in Our Monticello, Iowa Warehouse. This item ships free in the continental USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “American Auto Wire W510055 1967-68 Ford Mustang Classic Update Wiring Harness” is in sale since Tuesday, November 25, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 510055
• Other Part Number: AAW510055
• Warranty: Yes
• Part Brand: American Autowire
• Country of Manufacture: United States

1955 1956 Chevy Classic Update Wiring Harness Kit. American Autowire Part Number: 500423 Yogi’s Part Number: AAW500423. This Item is In Stock in Monticello, Iowa. This Classic Update Series wiring kit from American Autowire is for the 1955 1956 Chevy. It includes the following features. Original headlight bucket grommets, parking light weatherproof boot, tube assemblies, and light sockets are included. Extra long leads are supplied for custom routing. Accessory disconnect provided for connections to power windows, power seats, cruise control, fuel pump, electric choke, power door locks, extra radio (CB), or optional power accessory. New floor dimmer switch is provided. Wire length and connection accommodate original floor mounted dimmer switch. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box and custom mounting plate are designed for bolt-on, under dash installation. All required hardware supplied. Steering column connectors will plug directly into most aftermarket steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches. The original column can also be wired by using the supplied mating connector and terminals. Heater control panel lighting, power, and blower motor leads are included for original style heaters as well as aftermarket heat and AC updates. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. All original terminals, connectors, and light sockets are also supplied for original cluster gauges. Replacement headlight switch with internal circuit breaker, retention collar nut, adjustable length shaft, custom knob, extra connectors, and instructions are included. Original design rear body weatherproof boot and tube assemblies and original design light sockets make attachment to original or reproduction tail light assemblies an easy plug-in. Rear body harness assembly is designed to plug into the main harness in the original under dash position utilizing existing retention clips. License plate connectors and terminals included. Fuel tank sender wire and terminal included. Special terminals included for original. New ignition switch is included with indexed connector. Additional connectors and instructions are provided to use the original 1955-56 and 1957 ignition switches, original style door jamb switches, and overhead dome light. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Engine wiring includes connectors for points type and HEI distributors. Power and tach connectors supplied for GM HEI distributors. Alternator connectors are supplied for GM SI series internal regulator and one wire alternators. Engine wiring includes starter and gauge sender leads for water temp, oil pressure, and tach. Heavy 8 gauge alternator leads are supplied. Power circuits are fusible link protected. Please Note: Classic Update Wiring Kits do not support Ammeters. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. WARNING: This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. The item “Auto Wire W500423 1955-56 Chevy Passenger Car Classic Update Wiring Harness” is in sale since Monday, August 4, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 500423
• Other Part Number: AAW500423
• Warranty: Yes
• Part Brand: American Autowire
• Country of Manufacture: United States

Escort and Sierra Cosworth RHD replacement Link G4+ ECU and engine wiring harness. The perfect motorsport and fast road modification for your Cosworth YB car. Giving performance and reliability a much needed upgrade using the latest programmable ECU and user friendly software to get the best out of your hardware/tuning modifications. Cosworth engine aftermarket wiring harness features. Fully braided using attractive nylon over braid. Fully screened cam and crank sensor wiring. Automotive thin wall PVC sheathed wire. All new terminals and multi plug housings. Clearly labelled for easy installation. Removable ballast pack for using either original low impedance injectors or modern faster acting high impedance injectors. Easy to upgrade and use additional sensors if need be. Designed to fit the Cosworth YB engine without long lengths of unsightly harness. Uses all the same connecting plugs as a standard harness. Complete with bulkhead grommet. New power relays and holders with internal fuses. Designed to be easily removed with the engine for use on an engine dyno. Easily upgraded to use the more advanced feature packed Link ECUs offering launch control, antilag and many more inputs and outputs including knock control. Link Atom ECU Features. Only one is used on the Cosworth however wasted spark and coil on plug are beneficial on this engine and provisions have been made in the harness for this upgrade. Unused ignition drivers can be used for other items like cooling fan, boost solenoids, intercooler spray Etc. Giving full 720 deg sequential fuel timing adjustments. Aiding in fuel economy and power. Closed loop idle control. Using the standard ISCV a rock steady idle can be achieved by tuning the idle valve for better starting and higher idle at cold starts. Being able to tune this feature makes it possible to use the copy ISCV that dont normally work with the standard ECU strategies. Idle ignition trim also available to further tune the idle of your heavily tuned Cosworth. Very useful when using larger camshaft profiles and bigger inlet manifolds and throttle bodies. CAN Bus input/output for aftermarket digital displays and co-pilot displays or lambda sensor control units. Electronic boost control doing away with expensive boost controllers or bleed valves. Can be tuned to give progressive boost pressure dependent on throttle position. Multiple boost maps available and can be switched on the fly via a switch or even a push to pass button on the steering wheel giving a timed boost increase as set by the user. If using a digital road speed signal, boost can be set according to gear and road speed. Pre wired for Boost control, ISCV, and a spare 2 on the internal dashboard plug on the harness used to drive shift lights and rev counter when using coil on plug or wasted spark. Prewired for engine coolant and intake air temperature measurement. 3 0-5v analogue inputs. Prewired for throttle position and manifold pressure. Spare analogue input can be used for oil/fuel pressure measurement by using an additional sensor available separately. You can then set low oil/fuel pressure engine trips to help avoid costly engine damage. 2 Digital inputs can be used for road speed measurement to enable gear and speed detection, map switching, push to pass, high/low boost, ethanol content sensor, brake/clutch switch etc. 2 engine position inputs for cam and crank sensors for improved sequential fuel and ignition control. 32Mb of internal logging memory. Closed loop fuel control using additional lambda measurement units to continuously tune fuel table ensuring best fuel economy and performance at all times. Engine calibration can be tuned using typical manifold absolute pressure (MAP based) or throttle position based with a manifold pressure compensation. Up to 5d fuel and ignition tuning. Example:- MAP based fuel table that gets richer with vehicle speed and richer with exhaust temperature whilst compensated against intake air temp and engine coolant temperature. This kit should only be installed by a competent person. Basic electrical knowledge will be required. This is an aftermarket upgrade kit and as such requires some modifications to the standard car. Redline Tuning Ltd are an Essex based engine tuning company. Engine calibration and Motorsport specialists. In-house 4-wheel drive rolling road. Official Link/VI-PEC ECU dealer. Authorised Power Maxed dealer. Over 10 years experience. All products that we sell have been tried and tested in our workshop. We use many of the products in the workshop on a daily basis and know they work. We stand by these products and should there be any issues we will resolve them as quickly as possible. Our feedback speaks for itself. We ensure the lids of all products are secured and taped before bubble wrapping and shrink wrapping to ensure a damage free transit. We aim to post all order made before midday the same day. Orders made over the weekend are posted Monday. If you like what you see, visit our shop to view our full range. The item “Ford Cosworth Engine RHD Wiring Harness & Link Atom ECU” is in sale since Thursday, January 4, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Wiring Looms”. The seller is “redlinetuningparts” and is located in Basildon. This item can be shipped to United Kingdom.

• Manufacturer Part Number: Does Not Apply
• Classic Car Part: No
• Brand: Link
• Bundle Listing: No

Greddy E Manage ULTIMATE KIT to suit Nissan SR20DE(T) and other models. 1 x Greddy E-Manage ULTIMATE main unit. 1 x Greddy E-Manage ULTIMATE Tuning Software Installation Disc. 1 x Universal -WIRE IN – harness, FUEL & IGNITION. (Note – not plug in harness, will require wiring in to your loom). 1 x Laptop Cable. Greddy E-Manage Ultimate Piggyback ECU Greddy Performance does it again – this time with their new and improved Greddy E-manage Ultimate! The Greddy e-Manage Ultimate does what other piggybacks can’t do! Engineered to preserve the best features of the original E-Manage along with additional new features that you’ve been asking for. It’s the next best thing to an expensive standalone ECU! USB Port – improved communications & better real-time data and monitoring. Toggle function – switch between maps. Serial port – monitor and data logging. Switch port – Data log & Ign. Option 1 & 2 – Connectors for sensors. Individual cylinder fuel & ignition adjustment maps. Coolant temperature correction map. Air intake temperature map. A/F target value map. Nissan Valve control map. Idle stabilization map Additional Features. Text file save feature. Knock monitor (future feature). Ignition timing display (future feature). Note images for illustration purposes only. Plug in wiring harnesses may differ slightly according to your application. The item “Greddy e Manage emanage Ultimate ECU S13 S14 S15 SR20 POWER FC wire in harness” is in sale since Tuesday, October 5, 2010. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\ECUs, Chips, Cruise Control\ECUs”. The seller is “globalautoco” and is located in Nunawading BC. This item can be shipped worldwide.

• Manufacturer Part Number: Does Not Apply
• Brand: Does Not Apply

NOS original body wiring harness for the Willys M38A1. This is the main long harness that goes from the dash and light switch to the rear of the vehicle and connects all electrical components in between. New, unopened original box. The item “Jeep Willys M38A1 NOS Main Body Wiring Harness G-758″ is in sale since Thursday, September 27, 2018. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Engines & Components\Other”. The seller is “armytankguy” and is located in College Station, Texas. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Brand: Willys
• Manufacturer Part Number: G-758