Wire Wiring Harness

HELLO AND THANKS FOR LOOKING. This item is a large shop builders wire caddy for 1982-Today Harley colored wires. We do our best to satisfy all customers. So you have a full guaranty. How many sellers are confident enough about their products to do that????? These are the most common colors for making handlebar extensions for Harley Davidson. Package includes 27 colors of: 40 feet each of 27 colors in 18 gauge GXL and 40 each of 3 colors in 16 gauge TXL plus 2 extra spools in orange/white and black/red that are used more often. Thats 27 colors on 32 Spools; in all you get 1,280 feet of wire. Thats almost a ¼ mile of wire. Large Caddy # 1 includes. White 16 Ga TXL. Yellow 16 Ga TXL. 150 Molex male terminals. 150 Molex female terminals. 150 Deutsch male terminals. 150 Deutsch female terminals. 300 Pre cut 2 inch long 1/8 shrink. 20 Feet of ½ inch shrink. 20 feet of 3/8 inch shrink. 20 feet of 1/4 inch shrink. There is enough wire in this kit to make over forty 12 bagger kits or more of shorter lengths and plenty of wire left. We also carry smaller 10 to 20 foot wire caddys for those smaller shops. Think of us as your electrical filling station. Changing spools is easier than replacing an ink cartridge. This store is run by. OTHER WIRE AND COLORS BELOW. WIRE STOCK ON HAND 5/12/16. 16 gauge GXL (157). 18 gauge GXL (159). The item “Harley wiring Caddy, switch wire extension for harness making FX FL XL FLH FLS +” is in sale since Thursday, September 15, 2011. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Other Electrical & Ignition”. The seller is “brussellex” and is located in Salisbury, Massachusetts. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Brand: 4RCUSTOMS
• Manufacturer Part Number: 4RC-
• Placement on Vehicle: Left
• Surface Finish: Wood case
• Warranty: Yes
• Country/Region of Manufacture: United States
• Part Brand: 4RCustomscycleparts.
• Part Type: Electrical Components
• Part By Region: American
• Make: 4RCustomscycleparts.
• Model: Large Caddy #1

You may also like. 30Inch LED Light Bar w/Bumper Hidden Bracket, Wire Kit For Toyota Tundra 2014-17. We’ve upgraded the Light Bar kit, In the previous kit just included the led light bar+regular wiring harness, at present, the kits turns into the DT Wiring Kit and compatible mount bracket, So the sale price has increased, Thanks for understanding and sorry to taken your inconvenience! 2014-up Toyota Tundra 30 inch Straight Single Row LED Light Bar. Increase the truck safe and good looking, LED light bar is designed to project light at extreme distances while consuming very little power. It is well-known for energy conservation, Excellent waterproofing , Dustproof shock resistant. Durable extruded aluminum housing and virtually unbreakable polycarbonate lens are sealed against. The elements for years, full aluminum housing to against harsh environment and conditions. Working Voltage: DC 1030V(fits 12V/24V vehicles). Number of Chips: 30PCS5W/PCS high intensity LEDs. Spot Flood Combo Beam30 degree&60. Color Temperature: Pure White 6000K. Material: black Die-cast aluminum profile, PC surface. Alu Firm bracket, angle adjustable freely. Above 50,000 hours life time. Size (with bracket): 7858545mm/31inch3.3inch2inch approx. 1 x 150W led work light bar. 2 X mounting brackets. We are not responsible for undeliverable address. Thanks for your kindly undersatnding! If product has problem by itself or you are not satisfied with when you receive it. Please return it within 7 days for a replacement. Or cancel the order. We will reply in 24 hours and fix the problem. Your 100% satisfaction is our best goal. All for you, it’s will be smart choice! We will reply you ASAP. Our success will be depend on your supports. The item “30Inch LED Light Bar withBumper Hidden Bracket, Wire Kit For Toyota Tundra 2014-17″ is in sale since Monday, October 30, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Light Bulbs\LED Lights”. The seller is “motor-autolight” and is located in CA/KY. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

• Superseded Part Number: Toyota Series Bumper Driving Light
• To Fit: 14-up Toyota Tundra
• Wattage: 150W
• Interchange Part Number: 30 x 5W Single Row Straight Lightbar Driving Lamp
• Waterproof Rate: IP67
• Certifications: DOT Approved
• Type: Light Bar
• Beam Type: Spot
• Lumens (Light Flux): 15000LM
• Lens Color: Clear
• Manufacturer Part Number: M-DT150
• Placement on Vehicle: Front
• Other Part Number: Hidden Behind Lower Bumper Grille Opening Area
• Brand: TURBO SII
• Fitment Type: Direct Replacement
• Color Temperature: 6000K
• Warranty: 1 Year
• Voltage: DC 10~30V 12v 24v

This is a new dash wiring harness with fuse block for 58-62 Fullsize Passenger Chevy models. Do you have a 1958 1959 1960 1961 or 1962? Do you have a Impala Bel Air El Camino or Biscayne? Do you have manual trans or automatic trans? EXACT REPRODUCTION WIRING HARNESS. Exact reproduction wiring harness made to factory specifications using the factory blueprints. Our wiring harnesses are correct in every detail. Wiring harnesses connect to different electrical components in various locations throughout the vehicle. Often cars have wiring harnesses that have been “hacked” up and are missing correct connectors to plug into factory components, have corrosion or deterioration damage. These are manufactrued to the original blueprint NOS specifications. In order to satisfy the most discriminating enthusiast/restorer, we offer these authentic reproduction wiring harnesses. These harnesses will provide the finishing touch for any original or restored vehicle. They are built using original GM blue prints, cut to the exact lengths to provide a tailored look, and contain the correct type and color wire as well as the correct terminals. For those of you concerned about having your car judged, our reproduction wiring harnesses will pass all judging standards. These harnesses are ready to use just “plug in and go”. These harnesses are for owners who want a properly restored concourse quality vehicle, for owners to want to update old existing wiring, or for those who want to add factory installed options. They will look, fit and perform exactly as original. If you dont see it listed just ask as we are always expanded our inventory for the highest in customer service. 64 65 66 67 68 69 70 71 72 1964 1965 1966 1967 1968 1969 1970 1971 1972 copo yenko nickey ss rs rs/ss super sport ls6 l37 ls5 ls7 l78 350 327 383 400 402 396 427 454. The item “Dash wiring harness with fuseblock 58-62 Chevy Impala Biscayne Bel Air El Camino” is in sale since Thursday, August 10, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Interior\Dash Parts”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.

Accuair VU4 Solenoid Valve Manifold Unit & Air Suspension Control Wiring Harness. VU4 4-Corner Solenoid Valve Unit. 9ft airmaxxx Wiring Harness. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Accuair VU4 Solenoid Valve Manifold Unit & Air Suspension Control Wiring Harness” is in sale since Tuesday, October 10, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.

• Bundle Listing: Yes
• Adjustable: Yes
• Manufacturer Part Number: AIR-VALVE-VU4-HRNS
• Placement on Vehicle: Left
• Other Part Number: Universal Switch Box Air Bag Controller Wire
• Brand: airmaxxx
• Fitment Type: Performance/Custom
• Warranty: 1 Year

Its FINALLY here fully functional interior in your 350z with a 2JZ engine swap. The Wiring Specialties CANbus harness does the trick – Tach, engine temp and no fault lights for traction control and stability control. Have a properly running car again, with the power of a 2JZ engine. All of these features come with NO CORES needed. Our Pro-Series is ideal for those looking for the best aesthetics, weight savings and reliability. This harness completely replaces the 350z original engine harness with a PRO series JZ harness with proper fitment. The harness is designed’Tucked’ for a clean installation. The harnesses are built to exceed OEM spec for wire quality and power/ground routing. Wiring Specialties has developed the CANBUS converted device to allow full gauge functionality, fan control and all of this in a plug and play package. No CORE needed, Plug and Play, startup guaranteed. Engine: JZS147 and JZA80. Any non-VVTI 2JZGTE from MKIV Supra. Chassis: LHD USDM Z33 350z. Retains factory FANS, Speedometer, tachometer, engine temperature gauge, oil pressure gauge, alternator charge light, reverse lights and wipers. The Wiring Specialties harness provides proper 350z gauge cluster functionality for the JZ engine swap. ECU output functions such as Tach, Engine coolant temp, CEL, Speedometer, fuel gauge and illumination are all supported by the proprietary CANbus controller, included in this kit. Fans functionality the factory Z has very capable fans and controllers. We suggest keeping them for the swap, when possible. The Wiring Specialties CANbus Controller retains the factory fan functionality, with pre-set engine temp turn ON and OFF points. We also provide an override for FULL ON fan function by engaging the DSC button. Plug and play features of this harness require the OEM 350Z body harness, body control module and fuse boxes to be UNMODIFIED. The harness utilizes a number of relays and controllers that OEM 350z, so they need to remain on the chassis fuse box, in stock form. For proper ECT gauge functionality the. Supplied GM ECT sensor must be installed into the coolant elbow on the JZ. This is the 2-wire sending unit. Harness connection will be provided at the exact temp sender location. For proper Oil Pressure Gauge function, the 350z OEM oil pressure sending unit needs to be used (located behind the JZ AC compressor). In most cases a relocation line needs to be used in order to use the Nissan sensor with the swap. Harness connection will be provided to reach the passenger side shock tower for sensor relocation (optional). A/C option is available as a custom feature. Please inquire with our sales team about pricing. AEM Infinity and ECU Masters ECUs (and other standalone ECUs) are able to process a wideband signal and are wired DIRECTLY to the ECU. The LSU 4.2 Version of the Wideband SHOULD be used, as per AEM and ECU Masters. Select the Oval or Rectangular connector style in the options. All ECUs that are unable to process a wideband signal directly, will be wired for a FACTORY o2 sensor and a flying lead will be provided to connect the ECU to the Wideband controller (not supplied with the kit). For ECUs that do not process a raw wideband signal, a controller must be used. Controllers like a EUGO or the Haltech CAN wideband should be used. AEM Infinity and ECU Masters are pre-wired for Oil Pressure, Fuel pressure, Oil Temp, IAT and MAP sensor wiring directly to the ECU. INCLUDED WITH THIS PRO-SERIES HARNESS. Main Engine and Transmission one-piece tucked harness. 2x knock sensor connections. 4x VSV twin Turbo control connectors (Twin Turbo option only). ECT connector (ECU input). Coolant gauge connector (for canbus controller). Boost solenoid wiring (with AEM/Haltech or aftermarket computers). 12-pin and 4-pin igniter chip connectors (relocated to inside the car). 2x Cam sensor connector. Idle air motor connector. OEM Oxygen sensor connectors (wideband wiring is not part of the EFI harness, except AEM Infinity 6/8 or Haltech Elite). 2x ground ring terminals. Reverse lights sensor connector. 350Z Oil pressure connector (optional). ECU Diagnostics mode connector. No traction Control wiring supplied. Turn Key ENGINE START Guarantee. Tech support for our customers 7 days a week. The item “Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35″ is in sale since Sunday, October 16, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Charging & Starting Systems\Other”. The seller is “autocat51″ and is located in West Covina, California. This item can be shipped worldwide.

• Brand: WSP
• Manufacturer Part Number: WRS-PRO2J-350Z

1 – Electronic Pressure Control Solenoid (Force Motor) (24248893) 1 – Internal Wire Harness with TCC Lock-Up Solenoid (24229669) 1 – TCC PWM Solenoid (24227747) 1 – 3-2 Downshift Solenoid (24212327 / 24209121) 1 – Pressure Manifold Switch (24215111) All units come with new seals installed. Global Transmission Parts specializes in providing high-performance GM automatic transmission parts. We service a wide customer base that ranges from professional remanufactures to the casual rebuilder. Our Central Ohio location gives us the ability to provide one day standard ground parcel service to all of. West Virginia, plus parts of. The entire East Coast, Great Plains states and. Please be prepared to provide photos of the damaged item and packaging for us to submit to the carrier. So, we work hard finding the best rate for your situation and charge you what we are being charged. The item “NEW 4L60E 4L65E 4L70E 2003-06 Complete Electronics Wire Harness Solenoid Kit Set” is in sale since Sunday, September 13, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Automatic Transmission & Parts\Automatic Transmission Parts”. The seller is “globaltransmissionparts” and is located in Circleville, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

• Country/Region of Manufacture: United States
• Surface Finish: NEW
• Manufacturer Part Number: 4L60E
• Brand: Global Transmission Parts
• OE Spec or Performance/Custom: OE Spec

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 06 -’07 LS2 Drive by Wire Standalone Wiring Harness. Application 2006 – 2007 24X LS2 CORVETTE, GTO, TRAILBLAZER SS, SSR WITH DRIVE BY WIRE THROTTLE WITH 4L60E TRANSMISSIONS. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for 24X Gen IV applications above. The factory E40 Controller which came on these engines was only used for 2 years and as a result, tuners have limited experience with these controllers. PSI, instead, uses the 1997 – 2003 Corvette PCM, TAC Module and Pedal. These items will allow for proper function and tuning of your LS2 Engine. These harnesses include the correct EV6 injector connectors and provisions for low mount knock sensors and front mounted cam sensor. An alternative to drive by wire is PSI LS2 Drive By Cable Harness, P/N HAR-1054. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Please contact PSI for more information. New Jersey – 08724. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. Requires’99 -’04 LS1 PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use EV6 fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. LS2 Drive by Wire harnesses require Corvette, Z06, CTS-V Throttle Body (GM P/N 17113669) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, 5 wire MAF, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “2006-2007 24X GEN IV LS2 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBW)” is in sale since Monday, February 18, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Toms River, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: HAR-1056
• Warranty: Yes
• Part Brand: PSI

This is a new rear body tail lamp light wiring harness for Chevy & GMC trucks. This goes from the rear frame connector to the rear light assemblies. This does not fit stepside trucks. (Photo may not be of actual item, but to give graphic representation). EXACT REPRODUCTION WIRING HARNESS. Exact reproduction wiring harness made to factory specifications using the factory blueprints. Our wiring harnesses are correct in every detail. Wiring harnesses connect to different electrical components in various locations throughout the vehicle. Often cars have wiring harnesses that have been “hacked” up and are missing correct connectors to plug into factory components, have corrosion or deterioration damage. These are manufactrued to the original blueprint NOS specifications. In order to satisfy the most discriminating enthusiast/restorer, we offer these authentic reproduction wiring harnesses. These harnesses will provide the finishing touch for any original or restored vehicle. They are built using original GM blue prints, cut to the exact lengths to provide a tailored look, and contain the correct type and color wire as well as the correct terminals. For those of you concerned about having your car judged, our reproduction wiring harnesses will pass all judging standards. These harnesses are ready to use just “plug in and go”. These harnesses are for owners who want a properly restored concourse quality vehicle, for owners to want to update old existing wiring, or for those who want to add factory installed options. They will look, fit and perform exactly as original. If you dont see it listed just ask as we are always expanded our inventory for the highest in customer service. 64 65 66 67 68 69 70 71 72 1964 1965 1966 1967 1968 1969 1970 1971 1972 copo yenko nickey ss rs rs/ss super sport ls6 l37 ls5 ls7 l78 350 327 383 400 402 396 427 454. The item “Rear body tail light lamp wiring harness Chevy GMC pickup truck 73 74 -84″ is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Lighting & Lamps\Tail Lights”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

Rear View, Back Up Safety Camera & Wire Harness is a direct fit for the following. Genuine Ford Part Number: FC3Z-14A412-A & GC3Z-19G490-B. The item “2013-2016 Ford F250 F350 Super Duty Rear View Back Up Camera & Wire Harness OEM” is in sale since Monday, June 22, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Safety & Security\Other”. The seller is “quirkparts” and is located in Quincy, Massachusetts. This item can be shipped worldwide.

• Interchange Part Number: FC3Z-19G490-A FC3Z19G490A
• Primary Color: Black Blue
• Surface Finish: Wiring Harness Cable Camera
• Placement on Vehicle: Rear
• Other Part Number: FC3Z14A412A & GC3Z19G490B
• Brand: Ford
• Manufacturer Part Number: FC3Z-14A412-A & GC3Z-19G490-B
• Model: F-250 F-350 F-450 F-550 Super Duty
• Warranty: 2 Year
• Year: 2013 2014 2015 2016
• Make: Ford

Deutsch DTM Series Motorsport Connector Kit – 295pc. The Deutsch DTM Series of transportation connectors feature a smaller contact with an enhanced design based on the world-class, field-proven Deutsch DT Series. The DTM is a smaller connector to be used in harsh environmental applications where reliable signal circuits are critical to operating performance. Typical applications include on or around the engine, the transmission and under the hood. In fact, everywhere data signals or critical electronic circuits go, the fieldproven DTM connectors provide peak connector performance. The low-cost, size 20 contacts terminate AWG 20 gauge wire. Closed entry socket (female) contacts featuring spring action fingers are protected by a stainless steel hood. This allows for positive axial alignment while mating and helps prevent probe damage during testing. Thermoplastic housings offer a wide operating temperature range (-55°C to +125°C) while silicone rear wire and internal peripheral interface seals allow the DTM connectors to withstand moisture and fluids. The DTM Series connectors offer reliability and performance in a connector that fits everyones budget. 55°C to +125°C operating temperature. Available in 2, 3, 4, 6, 8 & 12 sizes. Accepts AWG 20 wire (0.5mm+2). Crimp contacts with option of gold or nickel, solid or stamped. 5X DTM04-2P 2-way receptacle with wedgelock. 5X DTM06-2S 2-way plug with wedge lock. 4X DTM04-3P 3-way receptacle with wedge lock. 4X DTM06-3S 3-way plug with wedge lock. 4X DTM04-4P 4-way receptacle with wedge lock. 4X DTM06-4S 4-way plug with wedge lock. 3X DTM04-6P 6-way receptacle with wedge lock. 3X DTM06-6S 6-way plug with wedge lock. 2X DTM04-8PA 8-way receptacle with wedge lock. 2X DTM06-8SA 8-way plug with wedge lock. 2X DTM04-12PA 12-way receptacle with wedge lock. 2X DTM06-12SA 12-way plug with wedge lock. 20X 0413 204 2005 Sealing blank. 3X 0411 240 2005 Removal Tool. Connector-Tech ALS Pty Ltd prides itself on the prompt processing of orders. You are welcome to collect your goods from our Brisbane store. We are located Unit 1, 18 Sudbury St, Darra QLD 4076. Please call 07 3376 4900 to speak to one of our team. Connector-Tech ALS Pty Ltd has provided harsh-environment connectors for over 20 Years. We only stock quality products and are proud of our service and history. We will assess and authorise return of goods at this time if necessary. Goods authorised for return for credit must be in original packing, undamaged, unused and delivered FIS (your cost – unless otherwise authorised) to Connector-Tech ALS Pty Ltd with details of invoice or packing slip. Check out our other items. The item “Deutsch DTM Connector Kit 295pc Series Automotive Harness Wiring Plugs #DTM-KIT2″ is in sale since Tuesday, March 4, 2014. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\ECUs, Chips, Cruise Control\Other”. The seller is “connector-tech_als” and is located in Darra. This item can be shipped worldwide.

• Manufacturer Part Number: DTM KIT2
• Brand: Deutsch
• Type: Plug
• Kit or Single Part: Kit