Wire Wiring Harness

Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747

Posted on by
Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747

Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747
America’s Oldest Speed Shop®. Has connections for 700R4 transmission. Common aftermarket fuel pump and fan relays are included. These harnesses feature all of the connection points necessary to run the engine and transmission if applicable. The emission equipment has been eliminated and only the needed connections to run the engine and transmission are incorporated. Standard length harnesses are 54 from the back of the engine to the PCM connectors. Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible. Made from premium grade GXL jacketed automotive wire. Most wiring is larger gauge than stock application for durability. No splices to reduce points of failure. All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping. Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification. All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks. Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation. OBD1 diagnostic port for connection to scanners and tuning tools. Made in the USA. By Johnny on October 17, 2017. Used for a tbi engine swap into older truck. Made the swap simple. Yes, I recommend this product. Nice wire harness, made life easy. By Mower man on September 17, 2017. Few branches could have been longer, had to lengthen a few sections, but overall, very helpful. Saved my swap, I’m n mechanical engineering don’t need to be. By project Roosta on August 13, 2017. Everything labeled, and in the right place. Made the conversation from a carb chevy 350 to throttle body chevy 350 like a pro.. And I get bragging rights that I did the swap. I didn’t go with it in the first place. By Mike on July 31, 2017. Installed with no issues. Made hooking up my donor engine easy. Exactly what I needed, without the useless extras. By Logan’s Dad on June 23, 2017. I, (Mostly my ten year old Son, but he lets me help some)put a freshened up 1991 TBI 454 in a Military Humvee. Like most, I’m on a budget. I had orignally intended to salvage the factory harness, but eventually came to my senses and shopped around for a new wiring harnes. I definitely got the most bang for my buck with this one. I wasn’t expecting anywhere near the quality that I received. Nor was I expecting everything to be so clearly labeled. If I ever put myself through another diesel to big block swap, this will be the first part I order. Easy To Set Up. Related Items / Suggested Parts. Painless Wiring 60101 GM Throttle Body Injection Engine Harness. Speedway 1985-89 Tuned Port Mass Air Engine Harness. Speedway GM Engine Wiring Harness, 1999-02 LS1. Please pay for all items at the same time. We cannot combine your order if you have already paid. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 65 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. All exchanges need to have reshipping charges included. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747″ is in sale since Wednesday, April 08, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Speedway
  • Manufacturer Part Number: 91008592

Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747
Tagged: , , , , , , , , .

Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic

Posted on by
Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic
Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic
Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic
Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic
Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic
Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic

Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic
Add Coast National Sales to your favorite stores and receive our exclusive emails about new items and special promotions! Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic. Pioneer + Best Kits. Pioneer Touchscreen DVD MP3 Bluetooth Stereo Receiver iPod iPhone Control. 7 WVGA Clear Resistive Touch Panel Display with LED Backlight. Features the responsive, powerful and intuitive NEX user interface with Color Customization. MIXTRAX blends songs together DJ-style. SiriusXM Ready for full entertainment with required subscription. Pandora lets you enjoy superior sound quality and full control in your car. AppRadio One gives you complete control over iPhone and Android apps on the radio’s screen. Bluetooth version 3 +EDR certified technology for hands-free talking and audio streaming. Works with most Bluetooth enabled cell phones (up to 32.8 ft in range). Includes an external wired microphone for clear and distortion-free talking. Time alignment optimizes music for where you’re sitting in the vehicle. Dimmer Setting (ON/OFF) with Home Screen Shortcuts Customization. Compatible with Apple iPhone 6/6+ and iOS 8+ software. MP3 ID3 Tag Display (Title/Artist/Album). Peak: 50W x 4 channels. Rms: 22W x 4 channels. Playback and Audio features. Plays CD, CD-R/RW, DVD, DVD-R/RW, MP3, AAC, FLAC and WMA. 264/JPEG Playback via USB. 24-bit Digital to Analog Converter. 13-band graphic equalizer w/7 selectable tone curves (5 Preset, 2 User). 3.5mm Rear A/V Auxiliary Input. High-pass Filter and Low-pass Filter. Outputs: 3 Sets of 4V preamp outputs (front, rear and subwoofer). Backup Camera Input: Used for universal rear view cameras with an RCA composite input. Rear RCA Video Output: Used for connection to separate monitors and other devices. Rear RCA Audio/Video Input: Used for connecting video accessories such as game consoles, video cameras, etc. Navigation Ready: Add navigation with installation of the Pioneer AVIC-U280 add-on GPS unit. Single Double DIN Installation Dash Kit/ ISO Radio. Comes with removable oversized storage pocket. Quick release snap-in ISO mount system with custom trim ring. Retention of factory climate controls, air vents, hazard button &, passenger airbag light. Accommodate a full recessed DIN unit with a pocket. Designed and contoured to match factory dashboard. Painted to match factory dash color. High-grade ABS plastic structure. Factory style texture design. Radio Housing Trim Plate. Stereo Wiring Harness Antenna Combo. Plugs into Harness at radio. Heat resistant for lasting a lifetime. Allows installation of aftermarket radio using factory wiring and connector. High quality ABS plastic molded connector for the perfect fit. Pre-stripped to make installation quick and easy. No cutting of factory wiring needed. Antenna Adapter to Aftermarket Radio. Use when replacing factory radio. Quick and Easy Installation. Quality crafted to factory’s rigid specification. Vehicle Compatability Chart may vary depending on vehicle options, production dates, and install application. Not compatible with amplified or JBL premium sound systems. Single Din: 180mm X 50mm (7.086″ x 1.968″). Single Din Radio Face Size Max: 6-3/4″ x 1-7/8″ (171.45mm x 47.625mm). Double Din: 180mm x 100mm (7.086″ X 3.937″). Double Din Radio Face Size Max: 3-13/16″ x 6-13/16″ (96.8375mm x 173.0375). Return for replacement within: 14 days. We are not responsible for any excess charges. Local pick-up is available by appointment only, please inquire for more information. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic” is in sale since Friday, March 31, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “coast_national_sales” and is located in Los Angeles, California. This item can be shipped worldwide.
  • Brand: Pioneer + Best Kits
  • Manufacturer Part Number: AVH-X490BS+HONK838D+HON-1812+HON-A106
  • Interchange Part Number: Pioneer DVD Car Stereo Receiver
  • Other Part Number: Bluetooth, SiriusXm Ready, Mixtrax, Spotify
  • Surface Finish: Auxiliary, USB Input, Remote Control
  • Superseded Part Number: Metra 99-7871
  • Alternate Dash Part: American Intl HA1561DGB
  • Other Dash Part: Scosche HA10B
  • Interchange Harness Part: Metra 70-1722
  • Alternate Harness Part: American Intl HWH-812
  • Other Harness Part: Scosche HA10B
  • Interchange Antenna Part: Metra 40-HD10
  • Alternate Antenna Part: Best Kits HO-6 HO6
  • Other Antenna Part: AD111
  • Type: Installation Harness Antenna
  • Market Type: US Domestic Vehicles Only

Pioneer 2017 DVD Car Radio Stereo Dash Kit Wire Harness for 06-11 Honda Civic
Tagged: , , , , , , , , .

Powerstroke 7.3L Diesel Glow Plug Kit Gaskets Harnesses Plugs Relay Pigtails

Posted on by
Powerstroke 7.3L Diesel Glow Plug Kit Gaskets Harnesses Plugs Relay Pigtails

Powerstroke 7.3L Diesel Glow Plug Kit Gaskets Harnesses Plugs Relay Pigtails
This is our “Meltdown kit” for mid 1997 – 2003 Ford / International Powerstroke engines. A very common problem on the Powerstroke engines is that the main connectors at the valve cover which supply current for the glow plugs and injectors get too hot and melt down – This kit contains everything you need to fix it! Includes the following parts. New Valve cover gaskets. Two new external connectors with pigtail wiring. Internal valve cover harnesses – complete for both sides Updated design eliminates the connection inside the valve cover gasket eliminating the most common failure point. 8 new Premium dual coil glow plugs Because occasionally a glow plug that draws too much current might have caused the issue. OEM glow plug relay. NOTE: If you have a 1997 model Powerstroke, you need to look at the valve covers to see if this kit will work. For our early kit.. If you have only one connector per valve cover, this kit will do the trick! PLEASE READ. We value your patronage. If a delay occurs that is longer than would normally be considered commercially acceptable, we will attempt to contact you. Please take a moment to read it. Local auto parts stores will not pay your travel costs to return a part either. Applications We guarantee our parts to be as described by part number, picture, and verbiage. While we do our best, vehicle applications, however, simply cannot be guaranteed. In most cases, we do not generate application lists. It is the nature of the auto parts business that, in rare cases, a part will not be correct for a certain vehicle even though it “should” fit. This may occur because of errors on application lists, mid-year production changes, changes to the vehicle since it was built, the fact that a car was not built for the US market, etc. If a part does not fit your vehicle, this does not mean the part is not as described. Problems can be solved much more easily when civility is kept intact. The item “Powerstroke 7.3L Diesel Glow Plug Kit Gaskets Harnesses Plugs Relay Pigtails” is in sale since Wednesday, May 14, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Spark Plugs & Glow Plugs”. The seller is “accuratediesel” and is located in Bitely, Michigan. This item can be shipped worldwide.
  • Brand: ATS
  • Interchange Part Number: Valve cover Gasket UVC wiring International T444E
  • Manufacturer Part Number: 73MDKT-L
  • Other Part Number: Ford connectors 1997 1998 1999 2000 2001 2002 2003
  • Superseded Part Number: 97 98 99 00 01 02 03 F250 F350 F450 F550 Ford 7.3
  • Warranty: Yes
  • Part Brand: Injector
  • Placement on Vehicle: Left

Powerstroke 7.3L Diesel Glow Plug Kit Gaskets Harnesses Plugs Relay Pigtails
Tagged: , , , , , , , , .

How To Correctly Install An Aftermarket Car Stereo Wiring Harness And Dash Kit

Posted on by
Tagged: , , , , , , .

1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC

Posted on by
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC

1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
Hello, This listing is for one new 1964 Chevrolet Impala SS Under Dash harness with console shift, manual or automatic transmission with AC. Includes complete fuse box assembly. Harness is New, made in the USA. This has all the connections as follows. Headlight switch, lighter, heater controls, heater blower resistor, light socket for heater controls, ignition and light socket, brake light switch, back up light switch, dimmer switch, neutral safety switch, radio, E-brake warning buzzer, turn signal switch and a few others required for the under dash wiring. Also comes complete with original style BUS fuse box, both half’s. The back half of fuse box has the bulkhead connector for engine and forward light harnesses. Has connections for the under dash cluster harness which is a separate harness from this. Fits: 1964 Impala Super Sport with console/floor shift, manual or automatic transmission and AC. Thanks for visiting and hope to have your business. The item “1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC” is in sale since Saturday, May 30, 2009. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “24kaccents” and is located in Niagara Falls, New York. This item can be shipped worldwide.
  • Brand: American Auto Wire
  • Manufacturer Part Number: CF30169
  • Surface Finish: Wiring Harness
  • Warranty: Yes
  • Country/Region of Manufacture: United States

1964 Chevy Impala SS Under Dash Wiring Harness with Fusebox MT AT withAC
Tagged: , , , , , , .

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

Posted on by
TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
Performance Fuel Injection Systems Stand Alone Fuel Injection System WIRE HARNESS & ECM (computer). This is a fuel injection system Wire harness. Upgrading your carburated Classic Car, Truck, Jeep, Mud Bogger, OFF Road Truck, or Hot Rod to Fuel Injection and using a TBI Engine from a Truck Van then Performance Fuel Injection Systems has a harness for your project. Fuel injection is becoming a very popular upgrade. Swaping in a TBI Engine is nothing new. Fuel Injection Wire Harness from Performance Fuel Injection Systems is Just what you need. We eliminate what you don’t need. Our custom Chips in the ECM (computer) have what you don’t need turned off, so you wont get a bad running engine or a CHECK ENGINE LIGHT. Stand alone means that the system only needs 12 volt ignition and 12 volt battery feed to make the system run. We only use the 5 sensors so this is a very simple system, and the best of all the fuel injection system installed on your vehicle runs completely closed loop once warmed up (14.7 air fuel ratio) just like the new vehicles, but with fewer sensors than a new car. The TBI system is based off the reliable 1987 to 1995 Chevy PU with Throttle Body Injection (TBI) this was a proven great system for years and there were and still are thousands of these vehicles out there. The ECM are remanufactured. The wiring harness is all made with TXL wire which is water oil and grease resistance, and all in convoluted loom (split loom) which makes for a good looking system when you open the hood. Comes With Complete Instructions for installation. THIS HARNESS IS FOR A CHEVY TBI ENGINE SWAP. Fuel Injection System Harness includes. Wiring Harness W/fuel pump relay and main power Relay. ECM (maybe re-manufactured) with custom calibrated EPROM chip (installed in ECM). PFI STICKER FOR YOUR WINDOW, FENDER, UNDER YOUR HOOD, OR TOOL BOX. Lifetime on harness against defects 90 days for ECM. The item “TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP” is in sale since Tuesday, November 17, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “performancefuelinjectionsystems” and is located in Elsie, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Performance Fuel Injection Systems
  • Manufacturer Part Number: WH0001
  • Warranty: Yes
  • Country/Region of Manufacture: United States

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
Tagged: , , , , , , .

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

Posted on by
TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
Performance Fuel Injection Systems Stand Alone Fuel Injection System WIRE HARNESS & ECM (computer). This is a fuel injection system Wire harness. Upgrading your carburated Classic Car, Truck, Jeep, Mud Bogger, OFF Road Truck, or Hot Rod to Fuel Injection and using a TBI Engine from a Truck Van then Performance Fuel Injection Systems has a harness for your project. Fuel injection is becoming a very popular upgrade. Swaping in a TBI Engine is nothing new. Fuel Injection Wire Harness from Performance Fuel Injection Systems is Just what you need. We eliminate what you don’t need. Our custom Chips in the ECM (computer) have what you don’t need turned off, so you wont get a bad running engine or a CHECK ENGINE LIGHT. Stand alone means that the system only needs 12 volt ignition and 12 volt battery feed to make the system run. We only use the 5 sensors so this is a very simple system, and the best of all the fuel injection system installed on your vehicle runs completely closed loop once warmed up (14.7 air fuel ratio) just like the new vehicles, but with fewer sensors than a new car. The TBI system is based off the reliable 1987 to 1995 Chevy PU with Throttle Body Injection (TBI) this was a proven great system for years and there were and still are thousands of these vehicles out there. The ECM are remanufactured. The wiring harness is all made with TXL wire which is water oil and grease resistance, and all in convoluted loom (split loom) which makes for a good looking system when you open the hood. Comes With Complete Instructions for installation. THIS HARNESS IS FOR A CHEVY TBI ENGINE SWAP. Fuel Injection System Harness includes. Wiring Harness W/fuel pump relay and main power Relay. ECM (maybe re-manufactured) with custom calibrated EPROM chip (installed in ECM). PFI STICKER FOR YOUR WINDOW, FENDER, UNDER YOUR HOOD, OR TOOL BOX. Lifetime on harness against defects 90 days for ECM. The item “TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP” is in sale since Tuesday, March 28, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “performancefuelinjectionsystems” and is located in Elsie, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Performance Fuel Injection Systems
  • Manufacturer Part Number: WH0002
  • Warranty: Yes
  • Country/Region of Manufacture: United States

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP
Tagged: , , , , , , , .

E171 LS1, LS2, LS3, L92 LS7 24X 4L60E wiring harness

Posted on by
E171 LS1, LS2, LS3, L92 LS7 24X 4L60E wiring harness

E171 LS1, LS2, LS3, L92 LS7 24X 4L60E wiring harness
E171 – LS1, LS2, LS3, L92 LS7 wiring harness. Custom stand alone open loop only Engine wiring harness. 2 Main trunk options 50 or 16 inches long from rear of engine to PCM connectors (allowing easy installation). 3 wire hook up with 1 fuel pump wire and tack. Choice of 3 injector harness leads (Specify Injector Plug). This kit is designed to upfit any GM LS series engine with 24x crank front or rear cam sensor (specify upon order). For 58X go to E172 listing 200518132935. The item “E171 LS1, LS2, LS3, L92 LS7 24X 4L60E wiring harness” is in sale since Monday, March 01, 2010. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Engine & Components\Other”. The seller is “jas4120″ and is located in Springfield, Minnesota. This item can be shipped worldwide.
  • Manufacturer Part Number: sch9907
  • Warranty: Yes
  • Part Brand: Schwanke Engines
  • Country of Manufacture: United States

E171 LS1, LS2, LS3, L92 LS7 24X 4L60E wiring harness
Tagged: , , , .

C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness

Posted on by
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness

C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
Ask for a promo code before purchasing. VETTE LIGHTS 3.0 BY CATHEADLIGHTS. Designed, engineered, and manufactured by Catheadlights. The 2nd easiest kit to install on the market… Behind our plug and play kits! 69-71 Lincoln Mark III. VETTE LIGHTS 3.0 by CATHEADLIGHTS. 68-82 C3 Corvette headlight motor conversion kits. Electric headlight opener conversion kit for 68-82 C3 Corvettes designed by Catheadlights. The kit consists of new, Catheadlights exclusive design, CNC laser cut mounts that bolt to the factory vacuum actuator position, no drilling required, complete with refurbished Ford or Mazda motors that have been tapped and use button head bolts to secure them to the mount. No unreliable motors to replace or expensive electronics. The kit is complete and ready to bolt in using GM style black fender bolts with washers and works with Air Conditioned and NON-Air Conditioned cars. The mounts require a small notch to be cut, as shown in the pics, but the Catheadlights mount completely covers it, making installation look factory, and also strengthening the headlight system. The kit comes completely put together, once you make the cut, bolt in the kit, attach and simply adjust the CUSTOM aluminum arms(work like a turn buckle) and the springs, you are ready to plug in the. Included is a simple Bosche style relay wiring harness, the harness is a three wire connection. Power, ground and trigger wire. This wiring harness is recommended for floor mounted dimmer switch Vettes only(68-76), because of the difficulty to connect the trigger wire on column mounted dimmer switch Vettes(77-82). Using the dimmer switch ensures a factory opening look. Other wiring options do not allow your headlights to stay closed while your running lights are on. Detailed instructions are included. New(NOS) motor kits. Kits without motors are also available. As seen on Stacey Davids GEARZ 67 Cougar Interceptor (MAV TV). Featured in Legendary Cougar Magazine. Here are few videos of the kit in action. The item “C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness” is in sale since Friday, March 06, 2015. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Exterior\Grilles”. The seller is “catheadlights” and is located in Clarksville, Tennessee. This item can be shipped worldwide.
C3 Corvette 68-82 Electric headlight motor conversion kit / 3 wire harness
Tagged: , , , , , , , .

Speedway 1994-1997 Chevy Pontiac GM LT1 350 5.7L Engine Swap Wiring Harness

Posted on by
Speedway 1994-1997 Chevy Pontiac GM LT1 350 5.7L Engine Swap Wiring Harness

Speedway 1994-1997 Chevy Pontiac GM LT1 350 5.7L Engine Swap Wiring Harness
America’s Oldest Speed Shop®. Has connections for both the 4L60E and manual 6-speed transmissions. ECM programming will need to match transmission style. Common aftermarket fuel pump and fan relays are included. These harnesses feature all of the connection points necessary to run the engine and transmission if applicable. The emission equipment has been eliminated and only the needed connections to run the engine and transmission are incorporated. ECM programming will need to be done to remove all of the unneeded trouble codes that may be active from the stock application. Programming will need to be done to remove VATS (vehicle anti-theft system) programming, otherwise the engine will not run. These wiring harnesses do not include any type of VATS module to defeat the theft system. Standard length harnesses are 54 from the back of the engine to the PCM connectors. Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible. Made from premium grade GXL jacketed automotive wire. Most wiring is larger gauge than stock application for durability. No splices to reduce points of failure. All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping. Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification. All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks. Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation. OBD2 diagnostic port for connection to scanners and tuning tools. Made in the USA. By Rich on May 14, 2017. I used it on my 88 camaro lt1 swap it made tucking the ecu away easy and everything work nice. Of all of the wiring harnesses out there….. By Davis racing on May 10, 2017. The speedway harness had connectors that I had not seen on the other harnesses that I have used. The oil pressure and oil level sensor connectors was nice. Fitment was top notch and it was well labeled. Easy To Set Up. Yes, I recommend this product. Related Items / Suggested Parts. Speedway 1985-89 Tuned Port Mass Air Engine Harness. Speedway GM Engine Wiring Harness, 1999-02 LS1. Please pay for all items at the same time. We cannot combine your order if you have already paid. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 65 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. All exchanges need to have reshipping charges included. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway 1994-1997 Chevy Pontiac GM LT1 350 5.7L Engine Swap Wiring Harness” is in sale since Wednesday, April 08, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Speedway
  • Manufacturer Part Number: 91009497

Speedway 1994-1997 Chevy Pontiac GM LT1 350 5.7L Engine Swap Wiring Harness
Tagged: , , , , , , , .