Wire Wiring Harness

Installation Of A Trailer Wiring Harness On A 2008 Volvo S60 Etrailer Com

Posted on by
Tagged: , , , , , .

4.8 / 5.3 / 6.0 Vortec LS Standalone Wiring Harness Dyno Run

Posted on by
4.8 / 5.3 / 6.0 Vortec LS Standalone Wiring Harness Dyno Run
4.8 / 5.3 / 6.0 Vortec LS Standalone Wiring Harness Dyno Run
4.8 / 5.3 / 6.0 Vortec LS Standalone Wiring Harness Dyno Run
4.8 / 5.3 / 6.0 Vortec LS Standalone Wiring Harness Dyno Run

4.8 / 5.3 / 6.0 Vortec LS Standalone Wiring Harness Dyno Run
Complete Standalone Harness for GM Gen III. 4.8/5.3/6.0L Drive-by-Cable. This is the unwrapped version of Swap Specialties and Performance Premium Harness, if you would like it covered ask us about our covering options at checkout. Description for the Unwrapped Harness. Harness is designed for GM Gen III (24x) engines being used for transplants. (4.8L, 5.3L, and 6.0L). Harness is 100% weatherproof. From the PCM to the fuse box, you can mount the entire unit under the hood or in the car. Easy install, all wires are exact length and labeled for a clean, hassle-free installation. Made only with highest quality 14 and 18 GA TXL Automotive Wire. Harness has VSS output and Tach output included. Harness has no covering. It can be covered later by loom or other wiring covering. Harness comes with the following wiring provisions included. Let us know what transmission you are running and we can set it up accordingly for you. Available options to help customize your project are. Electronic Transmission Control (4L60/80e, T56/60). We can customize any harness for your project needs. Let us know how we can help. We can also re-flash your PCM or customize any harness to your project! With over 40 years of standalone experience Swap Specialties and Performance assures our products to be the best fitting and operating harnesses on the market. Please let us know if we can customize anything to make your project that much easier and better. The item “4.8 / 5.3 / 6.0 Vortec LS Standalone Wiring Harness Dyno Run” is in sale since Tuesday, May 23, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “swapspecialtiesperformance” and is located in Oxford, Michigan. This item can be shipped worldwide.
  • Brand: Swap Specialties and Performance
  • Manufacturer Part Number: 852110
  • Placement on Vehicle: Left
  • Surface Finish: none
  • Warranty: 90 Day
  • Country/Region of Manufacture: United States

4.8 / 5.3 / 6.0 Vortec LS Standalone Wiring Harness Dyno Run
Tagged: , , , , .

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

Posted on by
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans
Looking for an OEM Quality, Long Lasting, Stand Alone EFI Engine Management Harness? Well Look No More! As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality TXL (Polyethylene Cross Linked). All Harnesses are long enough for the PCM to be mounted under the dash. All Harnesses have a High Quality DELPHI Grommet installed on the Harness. Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes Completely Labeled. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. Will Work With 24x LS2 Engines With EV1 Injectors and Appropriate Extensions and Adapters. T56, Non-Electric Automatic or Manual Transmission. 5 Wire Mass Air Flow. If you have questions feel free to ask! The item “1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans” is in sale since Sunday, October 16, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “bpautomotivellc” and is located in Columbia, Kentucky. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: BP Automotive
  • Manufacturer Part Number: H301
  • Warranty: Yes
  • Country/Region of Manufacture: United States

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans
Tagged: , , , , , .

Car Stereo Wiring Harnesses Interfaces Explained What Do The Wire Colors Mean

Posted on by
Tagged: , , , , , , , .

Ron Francis COBRA75 Wiring Harness EFI Mass Airflow Ford 5.0 5.8L Universal Kit

Posted on by
Ron Francis COBRA75 Wiring Harness EFI Mass Airflow Ford 5.0 5.8L Universal Kit
Ron Francis COBRA75 Wiring Harness EFI Mass Airflow Ford 5.0 5.8L Universal Kit
Ron Francis COBRA75 Wiring Harness EFI Mass Airflow Ford 5.0 5.8L Universal Kit

Ron Francis COBRA75 Wiring Harness EFI Mass Airflow Ford 5.0 5.8L Universal Kit
Please hover mouse to enlarge image. The Detail Zone Ford 5.0EFI Universal Fit Wiring System. Works with mass air flow equipped 302 and 351 engines. Set up for 1-3-7-2-6-5-4-8 HO firing order. No provisions for emissions. Not intended for installation on emission controlled vehicles. Designed specifically for Cobra replicas, street rods, and hot rods. That have room under the dash to relocate the Ford ECM. Summit Racing Part Number. Lease see the “Compatibility” link at the top of the listing. Fitment information may not be available for all products and those without fitment will not have a Compatibility link. Please be sure to view the “Notes” option for more details if it is available. We are unable to guarantee a specific carrier. This means orders may arrive in multiple boxes or at different times. We are unable to send an order without an invoice. We offer a 90-day Handshake Guarantee. The item “Ron Francis COBRA75 Wiring Harness EFI Mass Airflow Ford 5.0 5.8L Universal Kit” is in sale since Saturday, November 01, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “summitracing_sales” and is located in Tallmadge, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Ron Francis Wiring
  • Manufacturer Part Number: COBRA75
  • Other Part Number: Ron Francis Wiring COBRA75, RFW-COBRA75

Ron Francis COBRA75 Wiring Harness EFI Mass Airflow Ford 5.0 5.8L Universal Kit
Tagged: , , , , , , , .

1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto

Posted on by
1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto

1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 94 -’97 LT1/LT4 Drive by Cable Standalone Wiring Harness. Application’94 -’97 LT1/LT4 Engines with Mechanical Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’94 -’97 LT1/LT4 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 96 -’97 LT1 Engines require’94 -’95 LT1 PCM (Service Number’051), contact. Note that the’96 LT1 PCM (Service Number’399) will work with this harness, however, PSI does not tune these model year PCMs. Harness is designed to use 96′-97′ single connector ignition coil, which is an improved design over the 92′-95′ style (DELCO# D-577). Harnesses are available for 4L60E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto” is in sale since Friday, March 02, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1006
  • Warranty: Yes
  • Part Brand: PSI

1994-1997 LT1 PSI STANDALONE WIRING HARNESS WithT56 or Non-Electronic Auto
Tagged: , , , , , , .

1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E

Posted on by
1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E
1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E
1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E
1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E

1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 94 -’97 LT1/LT4 Drive by Cable Standalone Wiring Harness. Application’94 -’97 LT1/LT4 Engines with Mechanical Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’94 -’97 LT1/LT4 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 92 -’97 LT1 Engines require’94 -’95 LT1 PCM (Service Number’051), contact. Note that the’96 LT1 PCM (Service Number’399) will work with this harness, however, PSI does not tune these model year PCMs. Harness is designed to use 96′-97′ single connector ignition coil, which is an improved design over the 92′-95′ style (DELCO# D-577). Harnesses are available for 4L60E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E” is in sale since Monday, June 06, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1005
  • Warranty: Yes
  • Brand: PSI

1994-1997 LT1 PSI STANDALONE WIRING HARNESS With4L60E
Tagged: , , , , .

Ford 5.0 EFI universal wiring harness 1989-1993

Posted on by
Ford 5.0 EFI universal wiring harness 1989-1993

Ford 5.0 EFI universal wiring harness 1989-1993
Please specify the year, make and model of the car the engine came from. Once every sensor is plugged in, you will have 3 wires to hook up (Battery feed, Ignition feed and ground). It is built in the U. With brand new OEM Ford connectors, 260 degree automotive grade GXL wire (quality automotive fireproof wire with thicker insulation than TXL wire). This harness is properly fused with quality relays. Harness can be used with long tube headers or stock exhaust manifolds. Harness is designed to mount the ECM under the dash (42 inches of wire from the back of the motor). Harness can be used with 5 speed manual, AOD, or any Non-computer controlled transmission. EGR eliminator is included and comes pre-installed. It will work with any performance upgrades or engine diagnostic tool designed for the Mustang 5.0L engine. This harness is made for the H. Firing order/Cam (1-3-7-2-6-5-4-8), but can be changed for Non-H. System includes: complete instructions, an assortment of 300 degree F wire loom, harness wrap and zip ties (not bare wire like other harnesses) to give it a finished look and protection. Manufactured by the Detail Zone (a division of Ron Francis Wiring) with RJM Technology. These are built right with quality parts from the correct manufacturers and quality checked for performance. Circuits tested to assure quality. The item “Ford 5.0 EFI universal wiring harness 1989-1993″ is in sale since Saturday, November 15, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “qualityautospecialties” and is located in Blacksburg, Virginia. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan, South africa, New Zealand.
  • Warranty: Yes
  • Country of Manufacture: United States
  • Brand: The Detail Zone
  • Manufacturer Part Number: Cobra-75

Ford 5.0 EFI universal wiring harness 1989-1993
Tagged: , , , , .

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)

Posted on by
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 99 -’03 Vortec Drive by Cable Standalone Wiring Harness. With T56 or Non-Electronic Transmission. Application’99 -’03 Vortec 4.8, 5.3, 6.0 Engines with Mechanical Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’99 -’03 Vortec retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. Harnesses designed to use’99 -’04 LS1 /’99 -’02 Vortec PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use Multec fuel injectors (gas), 5 wire MAF sensor, and 24x Crank Sensor. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. If using LS car style intake and EV1 injectors, please order HAR-1012. For harness modification including 4L80E transmission, 5 wire MAF, or Fuel Injector (EV6 Flex Fuel) Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)” is in sale since Saturday, March 03, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1019
  • Warranty: Yes
  • Part Brand: PSI

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS WithT56 (DBC)
Tagged: , , , , .

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)

Posted on by
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)
1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)
HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 99 -’03 Vortec Drive by Cable Standalone Wiring Harness. Application’99 -’03 Vortec 4.8, 5.3, 6.0 Engines with Mechanical Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’99 -’03 Vortec retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. Harnesses designed to use’99 -’04 LS1 /’99 -’02 Vortec PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use Multec fuel injectors (gas), 5 wire MAF sensor, and 24x Crank Sensor. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. If using LS car style intake and EV1 injectors, please order HAR-1012. For harness modification including 4L80E transmission, 5 wire MAF, or Fuel Injector (EV6 Flex Fuel) Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)” is in sale since Saturday, March 03, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1018
  • Warranty: Yes
  • Part Brand: PSI

1999 2003 VORTEC 4.8 5.3 6.0 PSI STANDALONE WIRING HARNESS With4L60E (DBC)
Tagged: , , , , .