Wire Wiring Harness

40W LED Pods w/ Foglight Bracket/Wirings For 08-10 Ford F250 F350 F450 SuperDuty. Each kit comes with the pair of LED fog lights, mounting bracket, wiring harness, and an on/off switch to transform your fog lamp location to a full LED look. Many Ford truck drivers operate their trucks as both daily drivers and work utility vehicles, so it’s important that the lighting on the truck is on point. This kit allows you to get a new LED lighting for your fog lamps so that you will never have to worry about not having enough lighting when you need it the most. Powered by 40W high powered LED lights for an extremely bright output. Each kit comes with the pair of LED fog lights, mounting bracket, wiring harness, and on/off switch. Gives your Ford truck an aggressive look that matches its rugged aura. IJDMTOY (MotoringMax) was founded in 2004 and has since become one of the largest automotive LED lighting retailers in the United States. We are located in Los Angeles, California and carry the most complete LED replacements for all cars, SUVs, and trucks. And we will do our best to assist you in resolving any issues. Your satisfaction is our utmost concern. We are not responsible for international duty or custom charge. The item “40W LED Pods with Foglight Bracket/Wirings For 08-10 Ford F250 F350 F450 SuperDuty” is in sale since Monday, October 31, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Fog/Driving Lights”. The seller is “motoringmax” and is located in El Monte, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

• Brand: iJDMTOY
• Manufacturer Part Number: 70-235
• Interchange Part Number: Relay Wire Harness Kit plus ON/OFF Switch included
• Other Part Number: Replace Fit Factory Fog Light Opening Location
• Warranty: 90 Day
• Superseded Part Number: iJDM Offroad Headlight, Fog, LED Light Bar Series
• UPC: Does not apply

12 Circuit Wiring Harness Wire Kit Street Rod Hot Rod Universal Chevy Ford. This is for a brand new Gearhead universal 12 circuit/ 10 fuse universal wiring harness kit. This harness is easy to install and is a complete front to back wire kit – it will have more than enough wire for any project. We’ve had wire left over after doing the Suburban Wagons and long bed Chevy farm trucks! This kit has circuits for. Plus, there are a couple of accessory spaces in the fuse panel for additional circuits you may need such as power windows power locks etc. This kit includes the GM Delphi fuse panel as well as the GM headlight, dimmer, and alternator plugs. The plugs for the steering column are also included. The column plugs will fit both early and late model GM steering columns and any after market columns such as Flaming River, Ididit, Billet Specialties, Gearhead Enterprises, etc. This wiring kit features a thick coating over the copper wire. This is a type of high heat resistant and toxic chemical resistant wiring that will withstand almost any element. The gauge of the wiring ranges from 10 gauge to 18 gauge depending on what the wire is for. The wires are easily traceable since they are color coded. Each wire is hot stamped every 8-10 inches with what that wire is for. Hot stamping is much better than standard printing because it will not scrape or rub off. You may not be able to clearly read what each wire goes to since some of the wires are smaller gauge but they are labelled. This complete wiring harness is perfect for most basic car and truck projects. It is ideal for most street rod, hot rod, and custom projects. Thanks and Enjoy the savings!! Cinch 12 wire kit (9#). Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get Images that Make Supersized Seem Small. Tailor your auctions with Auctiva’s. Track Page Views With. Auctiva’s FREE Counter. The item “12 Circuit Wiring Harness Wire Kit Street Rod Hot Rod Universal Chevy Ford” is in sale since Wednesday, November 08, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica.

• Brand: Gearhead
• Manufacturer Part Number: Cinch 12 Wire Kit

This is for a brand new Gearhead universal 12 circuit/ 10 fuse universal wiring harness kit. This harness is easy to install and is a complete front to back wire kit – it will have more than enough wire for any project. We’ve had wire left over after doing the Suburban Wagons and long bed Chevy farm trucks! This kit has circuits for. Plus, there are a couple of accessory spaces in the fuse panel for additional circuits you may need such as power windows power locks etc. This kit includes the GM Delphi fuse panel as well as the GM headlight, dimmer, and alternator plugs. The plugs for the steering column are also included. The column plugs will fit both early and late model GM steering columns and any after market columns such as Flaming River, Ididit, Billet Specialties, Gearhead Enterprises, etc. This wiring kit features a thick coating over the copper wire. This is a type of high heat resistant and toxic chemical resistant wiring that will withstand almost any element. The gauge of the wiring ranges from 10 gauge to 18 gauge depending on what the wire is for. The wires are easily traceable since they are color coded. Each wire is hot stamped every 8-10 inches with what that wire is for. Hot stamping is much better than standard printing because it will not scrape or rub off. You may not be able to clearly read what each wire goes to since some of the wires are smaller gauge but they are labelled. This complete wiring harness is perfect for most basic car and truck projects. It is ideal for most street rod, hot rod, and custom projects. Thanks and Enjoy the savings!! Cinch 12 wire kit. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get Images that Make Supersized Seem Small. Tailor your auctions with Auctiva’s. Track Page Views With. Auctiva’s FREE Counter. The item “1953 1956 Ford Pickup Truck 12 Circuit Wiring Harness Wire Kit F-Series F100″ is in sale since Tuesday, November 28, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Other”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica.

• Manufacturer Part Number: Cinch12-5356Ford
• Brand: Gearhead

This is for a brand new Gearhead universal 12 circuit/ 10 fuse universal wiring harness kit. This harness is easy to install and is a complete front to back wire kit – it will have more than enough wire for any project. We’ve had wire left over after doing the Suburban Wagons and long bed Chevy farm trucks! This kit has circuits for. Plus, there are a couple of accessory spaces in the fuse panel for additional circuits you may need such as power windows power locks etc. This kit includes the GM Delphi fuse panel as well as the GM headlight, dimmer, and alternator plugs. The plugs for the steering column are also included. The column plugs will fit both early and late model GM steering columns and any after market columns such as Flaming River, Ididit, Billet Specialties, Gearhead Enterprises, etc. This wiring kit features a thick coating over the copper wire. This is a type of high heat resistant and toxic chemical resistant wiring that will withstand almost any element. The gauge of the wiring ranges from 10 gauge to 18 gauge depending on what the wire is for. The wires are easily traceable since they are color coded. Each wire is hot stamped every 8-10 inches with what that wire is for. Hot stamping is much better than standard printing because it will not scrape or rub off. You may not be able to clearly read what each wire goes to since some of the wires are smaller gauge but they are labelled. This complete wiring harness is perfect for most basic car and truck projects. It is ideal for most street rod, hot rod, and custom projects. Thanks and Enjoy the savings!! Cinch 12 wire kit. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get Images that Make Supersized Seem Small. Tailor your auctions with Auctiva’s. Track Page Views With. Auctiva’s FREE Counter. The item “1957 1960 Ford Pickup Truck 12 Circuit Wiring Harness Wire Kit F-Series F100″ is in sale since Tuesday, November 28, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Other”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica.

• Manufacturer Part Number: Cinch12-5760Ford
• Brand: Gearhead

This is for a brand new Gearhead universal 12 circuit/ 10 fuse universal wiring harness kit. This harness is easy to install and is a complete front to back wire kit – it will have more than enough wire for any project. We’ve had wire left over after doing the Suburban Wagons and long bed Chevy farm trucks! This kit has circuits for. Plus, there are a couple of accessory spaces in the fuse panel for additional circuits you may need such as power windows power locks etc. This kit includes the GM Delphi fuse panel as well as the GM headlight, dimmer, and alternator plugs. The plugs for the steering column are also included. The column plugs will fit both early and late model GM steering columns and any after market columns such as Flaming River, Ididit, Billet Specialties, Gearhead Enterprises, etc. This wiring kit features a thick coating over the copper wire. This is a type of high heat resistant and toxic chemical resistant wiring that will withstand almost any element. The gauge of the wiring ranges from 10 gauge to 18 gauge depending on what the wire is for. The wires are easily traceable since they are color coded. Each wire is hot stamped every 8-10 inches with what that wire is for. Hot stamping is much better than standard printing because it will not scrape or rub off. You may not be able to clearly read what each wire goes to since some of the wires are smaller gauge but they are labelled. This complete wiring harness is perfect for most basic car and truck projects. It is ideal for most street rod, hot rod, and custom projects. Thanks and Enjoy the savings!! Cinch 12 wire kit. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get Images that Make Supersized Seem Small. Tailor your auctions with Auctiva’s. Track Page Views With. Auctiva’s FREE Counter. The item “1955 1959 Chevy Pickup Truck 12 Circuit Wiring Harness Wire Kit Chevrolet” is in sale since Tuesday, November 28, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Other”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica.

• Manufacturer Part Number: Cinch12-5559Chevy
• Brand: Gearhead

Please hover mouse to enlarge image. Detail Zone Ford 2.3TurboEFI Engine Swap Wiring Harness. Fits turbocharged engines only. Summit Racing Part Number. Lease see the “Compatibility” link at the top of the listing. Fitment information may not be available for all products and those without fitment will not have a Compatibility link. Please be sure to view the “Notes” option for more details if it is available. We are unable to guarantee a specific carrier. This means orders may arrive in multiple boxes or at different times. We are unable to send an order without an invoice. We offer a 90-day Handshake Guarantee. The item “Detail Zone Ford 2.3TurboEFI Engine Swap Wiring Harness” is in sale since Tuesday, November 11, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “summitracing_sales” and is located in Tallmadge, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Brand: Ron Francis Wiring
• Manufacturer Part Number: MG65
• Other Part Number: Ron Francis Wiring MG65, RFW-MG65

Tow Hitch Receiver, And Towing Wire Harness. Specifications: THIS LISTING IS FOR GAS & HYBRID HIGHLANDERS AND DOSEINCLUDE THE WIRE HARNESS!!!!! IF YOU ARE SEARCHING FOR THIS LISTING WITHOUT A WIRE HARNESS WE HAVE LISTINGS FOR THAT!!!! Brand new factory item directly from Toyota. In original sealed packaging from factory. Attaches to the Rear Bumper. 365.99(Tow Hitch Receiver). If you would like to pull something with ease with your Highlander(Gas or hybrid) this would be the perfect part for you! Also includes a Toyota molded hitch plug! 16 connection points to the vehicle frame transfer force of towing across vehicle to reduce stress and preserve integrity of the frame and body structure. The Genuine Toyota tow hitch receiver is tested and ready for the long haul. It is mounted higher up on the frame to minimize any loss of departure angle while off road. Also, integration with the vehicles styling is achieved with an exclusive replacement bumper trim panel. Electro-deposition coating, or e-coating, helps protect against corrosion and the environment. Thorough testing of the tow hitch design is conducted both on and off the vehicle to ensure its capabilities including. Top coat protects against ultraviolet rays and helps maintain a like-new appearance. Advanced, no-drill installation process maintains the structural integrity of the vehicle frame. Custom replacement bumper trim panel matches vehicle contours and color. 2 inch Receiver Tube. Extensive stress point, fatigue and on-road testing ensure the products capabilities to meet or exceed all Toyota durability testing. Frame-mounted tow hitch receiver is located at the highest position possible to achieve maximum ground clearance and departure angles and easy access to the spare tire. Includes rear bumper hitch cover with Toyota engraved on it that keeps the receiver and harness connector accessible. Before towing, confirm that your vehicle and trailer are compatible and properly hooked up and loaded, and that you have any necessary additional equipment. The maximum you can tow depends on the total weight of your cargo, occupants and available equipment. This is a Trailer Wire Harness Kit – contains. 4-pin flat connector that provides power to trailers brake lights, turn signals and taillights. Complete with converter assembly, fusing, cables and connectors. Specifically designed to work with the vehicles existing electrical system. The wire harness is designed to be used with the tow hitch. The connector bracket is bolted to the hitch. O BOX’S PHYSICAL ADDRESS MUST BE PROVIDED. If there is an Issue with the part on Bev Smith Toyota’s Behalf we will send a Return Label to the customer and we will be. Since we are a fully functioning Toyota Dealership and Genuine Toyota Parts, And parts from the SET(South Eastern Toyota) Warehouse, All of are parts are covered. We will automatically leave you a five star feedback once checkout is complete. Please do not leave a negative or neutral feedback without contacting us first. We will provide 100% satisfaction. We at Bev Smith Toyota Guarantee a 100% satisfaction. All Listings and Emails are posted and answered by a Toyota certified Parts Specialist in the Bev Smith Toyota P arts Department. Any Specific questions regarding item will be looked up in Toyota cataloging focused on vehicles original equipment. Bev Smith Toyota 3350 S US Hwy 1 Fort Pierce FL 34982. Customer Service Dept Hours. The item “NEW OEM TOYOTA GAS & HYBRID HIGHLANDER TOW HITCH RECIVER & TOWING WIRE HARNESS” is in sale since Wednesday, November 16, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Towing & Hauling”. The seller is “bevsmithtoyota1010″ and is located in Fort Pierce, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Brand: Toyota
• Manufacturer Part Number: PT228-48140
• Other Part Number: PT725-48140
• Placement on Vehicle: Rear

Classic Update Wiring Harness Kit. Please note: Classic Update Kits do not support Ammeters. Classic Update Kits give you one of the most complete kits on the market to Make Wiring THAT Easy. They are designed for specific year, make, and model configurations. The kit boasts many features making it the most complete system of its type in the industry! Will accommodate 2 wheel or 4 wheel drive body applications. A replacement headlight switch with internal 30 amp circuit breaker, adjustable length shaft, and custom knob. Standard turn signal flasher, hazard flasher, and horn relay mounted on harness. NEW compact ATO-Style fuse panel that is fully encased in a closed box assembly with two mounting pads (mounting hardware included). The fuse cover lid is labeled on the inside identifying all circuits by description and their respective fuse ratings. All high amperage output circuits incorporate the same superior spring steel reinforced terminals that are used in our Highway Series kits. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies – an American Autowire exclusive feature. Steering column connectors can plug directly into most aftermarket steering columns or stock 1961-66 Ford columns using the adapter and terminals included in the kit. Separate under dash courtesy lamp assemblies are also included for use along with your original dome/interior lighting feeds. Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. Original terminals and connectors (another American Autowire exclusive) are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as AUTOMETER, CLASSIC INSTRUMENTS, STEWART WARNER, VDO, and others. Rear body harness assembly plugs into the main harness at the left kick panel location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes backup light lead wires and connectors along with stop and tail light lead wires and connectors to mate into the stock Ford tail and back up lamp pigtail assemblies. A license plate lamp lead connection, as well as a fuel tank sender wire with tank unit connection is also included. New floor dimmer switch is provided for ease of installation. Wire length and connection accommodate original floor mount dimmer switch. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, electric choke, and electric speedometer (if needed). A heavy gauge alternator feed and fusible link are also included for any typical high output 1 wire or internally regulated alternator. Connectors supplied for power and tach leads for GM style H. Distributors along with various oil and temp senders. A Ford Gen III series alternator adapter is available separately. Front lighting includes extra long leads that can be routed for stock or optional appearances. All head light, parking light, and directional light leads, along with a switched trigger wire for an electric fan relay (usually recommended with AC) are provided. Mating terminals and connectors are also provided for you to complete your custom installation. New ignition switch with indexed connector included. The early GM/FORD generators and externally regulated alternators are just not up to the task of providing power to an expanded wiring system like these classic update kits. The point of this kind of kit is really to allow people a way to upgrade and expand their wiring system and so an alternator upgrade is usually part and parcel to this kind of upgrade. NOTE: These kits are recommended for MODIFIED original vehicles, not OEM restoration projects. Note: This wiring is designed to work on Internally regulated alternator and have a 12v feed for the coil/distributor/ignition box. This kit IS NOT set up with a resistance wire for a standard, points type ignition system. It is wired with a full 12 volt primary ignition feed that is hot in both the start and run positions. It will support HEI, MSD, other electronic ignition systems, as well as computerized Fuel Injec- tion systems. If you wish to run a points type system, there are illustrations on the engine connection pages to do so. Extra parts that are not included in this kit will be required to complete that operation. (see our other items). Thank you for shopping at Matts Classic Bowties. The item “American Auto Wire 1961-1966 Ford F-100 Truck Wiring Harness # 510260 IN STOCK” is in sale since Friday, September 16, 2016. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “mattsclassicbowties” and is located in Benicia, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, Qatar, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 510260
• Brand: American Auto Wire AAW
• Warranty: Yes
• Country/Region of Manufacture: United States

Brand new American Autowire Classic Update Series Wiring Harness Kit. Complete Wiring Kit – 1969-72 Truck For. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box and custom mounting plate are designed for bolt-in under dash installation. All required hardware supplied. Location selected for easy accessibility and clearance of under dash accessories such as all gauge packages, wiper systems, heating and air conditioning systems, and stock original or aftermarket GM tilt steering columns. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. All original terminals, connectors, and light sockets are also supplied for original cluster gauges. However, the best aspect to the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO, just to name a few. Along with wiring for your original dome/interior lighting we have included separate under dash light sockets. Heater control panel lighting, power, and blower motor leads are included for original style heaters as well as aftermarket heat and AC updates such as HOTROD AIR, VINTAGE AIR, etc. Connections are also wired in for the glove box and cigarette lighter. Engine wiring includes connectors for points type and H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM “SI” series internal regulated and all “one wire”alternators. GM “CS” series alternator connector available separately. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Replacement headlight switch with internal circuit breaker included. Retention collar nut, adjustable length shaft, and custom knob are also included. Extra connectors and instructions are supplied for installation of original headlight switches. If you choose to install a late model GM steering column with the ignition switch in the column we include the correct connectors for that as well! Steering column connectors will plug directly into most aftermarket steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches. The original column can also be wired by using the supplied mating connector and terminals. New ignition switch is included. Additional connectors and instructions are provided to use the original ignition switch or column mounted ignition switch. Engine wiring includes starter and gauge sender leads for water temp, oil pressure, voltmeter, and tach. Heavy 8 gauge alternator leads are supplied. Power circuits are fusible link protected. Rear body harness assembly is designed to plug into the main harness in the original position utilizing existing retainers. Flexibility in harness design allows for original or custom routing. Rear body wiring includes backup light wires and mating connectors for backup light leads. License plate lead, connectors, and terminals included. Fuel tank sender wire and terminal included. Leads and terminals included for jamb switches and dome light. Color schematics and easy to understand installation instructions included. The item “1969-72 Chevy Truck C10 American Autowire Classic Update Wiring Harness #510089″ is in sale since Monday, May 02, 2016. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “supermuscleparts” and is located in Bellmawr, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Brand: American Autowire
• Manufacturer Part Number: 510089
• Warranty: Yes
• Country/Region of Manufacture: United States

Looking for an OEM Quality, Long Lasting, Stand Alone EFI Engine Management Harness? Well Look No More! As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality TXL (Polyethylene Cross Linked). All Harnesses are long enough for the PCM to be mounted under the dash. All Harnesses have a High Quality DELPHI Grommet installed on the Harness. Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes Completely Labeled. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. Multec II Injector Connectors. T56, Non-Electric Automatic or Manual Transmission. 5 Wire Mass Air Flow. If you have questions feel free to ask! The item “1999-2006 DBC 4.8 5.3 6.0 VORTEC STANDALONE WIRING HARNESS With T56/Non-Electric” is in sale since Monday, December 05, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “bpautomotivellc” and is located in Columbia, Kentucky. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Brand: BP Automotive
• Manufacturer Part Number: H304
• Warranty: Yes
• Country/Region of Manufacture: United States