Wire Wiring Harness

90195 Tekonsha Brake control with Wiring Harness 3015 FOR 2003-2007 GM

Posted on by
90195 Tekonsha Brake control with Wiring Harness 3015 FOR 2003-2007 GM

90195 Tekonsha Brake control with Wiring Harness 3015 FOR 2003-2007 GM
The Prodigy P2 electric brake controller supplies power to your tow vehicle’s brakes proportionally. This means that your trailer brakes at the same time and with the same strength as your vehicle – even in reverse gear. If you have to slam on your truck’s brakes, the trailer’s brakes respond instantly, too – there’s no delay. Therefore your vehicle’s brakes aren’t overworked from trying to stop the entire load, and they suffer less wear and tear extending the longevity of your brakes compared to time based controls. The P2 also cuts power to the trailer’s brakes when your vehicle is stopped – extending the life of the magnets and brake shoes in the trailer’s brake assemblies. Aside from smoother, more efficient braking that results from proportional application of stopping power, the Prodigy P2 also has a boost feature that gives you more initial braking power for those times when you’re towing heavier loads. That’s when more braking power is needed to stop the trailer at the same time as the tow vehicle. The boost setting sends 13 or 25 percent more power (depending on which setting you choose) back to the trailer brakes, thus compensating for heavier loads. You can boost the power manually at the push of a button as well. The boost feature gets more power to the trailer brakes exactly when you need it most, and your fully loaded rig brakes smoothly and comfortably. This brake controller levels automatically as you drive, so there’s no problem using it on steep hills or when towing through the mountains. The self-leveling feature also makes the Prodigy easy to install: Simply mount it in your cab at any vertical angle (it has 360-degree rotation). It’s easy to see the display and to access the pivoting manual override lever on the bottom of the unit. The P2’s continuous diagnostic check monitors your connection and magnet condition, so you can fix any problems before they land you on the side of the road. This newest version of Tekonsha’s popular Prodigy brake controller has reverse battery protection to preserve the unit and accessory systems. And the power-save mode reduces battery drain when the controller isn’t in use. The included mounting pocket makes your brake controller portable. Your unit slides out of the pocket mount for easy transfer of the brake controller to another vehicle. Just unplug the unit to move it to another car, truck or SUV use or simple storage – no hard-wiring required. An instructional DVD that is included with the brake controller’s written instructions allows you to take full advantage of all the features. Reverse battery protection for both vehicle and breakaway. Designed to work with electric over hydraulic brake systems. Numerous mounting options – including 360 degree vertical rotation. No level adjustment necessary – it adjusts itself to varying terrain as you drive. Great for backing into tough spots! Works proportionally in reverse with the ability to disable when not needed. Produces stops that are in proportion to vehicles deceleration rate. “Boost” feature gives users the ability to apply more initial trailer braking power when towing heavier trailers. Continual diagnostics check for proper connection, shorted magnet conditions and much more. Quick and easy disconnect feature allows user to remove and store the control when not in use. Electric trailer brake control for up to 4 braking axles. You’re already purchasing the item. With our dynamic pricing model, our prices are always competitive. Our prices are some of the lowest that you will find on the internet. Rest assured that you’re getting a good deal when purchasing with us. The item “90195 Tekonsha Brake control with Wiring Harness 3015 FOR 2003-2007 GM” is in sale since Friday, June 19, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Trailer Brakes”. The seller is “trucksetc” and is located in 75098. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Brand: Tekonsha
  • Manufacturer Part Number: 901953015
  • Warranty: Limited Lifetime Warranty
  • MPN: 901953015

90195 Tekonsha Brake control with Wiring Harness 3015 FOR 2003-2007 GM
90195_Tekonsha_Brake_control_with_Wiring_Harness_3015_FOR_2003_2007_GM_01_evjj Tagged: , , , , , .

2003-2007 fits NISSAN MURANO DOUBLE DIN INSTALL KIT (BLACK FINISH), WIRE HARNESS

Posted on by
2003-2007 fits NISSAN MURANO DOUBLE DIN INSTALL KIT (BLACK FINISH), WIRE HARNESS
2003-2007 fits NISSAN MURANO DOUBLE DIN INSTALL KIT (BLACK FINISH), WIRE HARNESS

2003-2007 fits NISSAN MURANO DOUBLE DIN INSTALL KIT (BLACK FINISH), WIRE HARNESS
UNIVERSAL CAR PANEL REMOVAL TOOL SET INCLUDED! Note: Can work in. Models but you will lose the. The set of pry tool is used for safely removing and installing car audio, exterior and interior trim, dash, door panel. The tool could efficiently reduce the concave and protruding scars left by using the screw knife to remove. Slim curved tip can get into tight gap for removing interior light cover, dashboard panel, door panel and for LED lighting or stereo installation. You can refit car audio quickly and easily by using this product. Easily remove trim, molding, door panels and dashboards. Great for automotive snap on trim panel and molding removal. The tools are designed to universally fit any car model. Plastic tool construction prevents scratching and damaging vehicles paint, leather, chrome and other surfaces. Works on interior and exterior trim, wide edge remover, narrow edge remover, pull-type remover, handle remover and upholstery clip remover. Size: Length about 14.5cm/16cm/18.6cm/22.5cm. 2019-12-12 07:56:13. 2019-12-12 04:52:51. 2019-12-12 02:40:57. 2019-12-12 02:39:02. 2019-12-12 02:07:46. 2019-12-12 01:49:12. 2019-12-12 01:00:15. 2019-12-12 00:39:36. 2019-12-12 00:14:47. Received my order today. 2019-12-11 22:46:26. 2019-12-11 22:33:20. Customer service was great. 2019-12-11 21:32:10. 2019-12-11 21:22:35. 2019-12-11 21:03:58. 2019-12-11 19:01:02. 2019-12-11 18:58:07. 2019-12-11 18:55:10. 2019-12-11 17:22:03. 2019-12-11 14:29:19. 2019-12-11 11:43:07. Tracking will be uploaded and Emailed to you. E bay return guidelines do apply. The item “2003-2007 fits NISSAN MURANO DOUBLE DIN INSTALL KIT (BLACK FINISH), WIRE HARNESS” is in sale since Monday, August 14, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “effinghamradiorepair” and is located in South Bend, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.
  • Bundle Listing: Yes
  • Surface Finish: black
  • Manufacturer Part Number: 99-7612B
  • Placement on Vehicle: Front
  • Other Part Number: RADIO DIN DASH KIT
  • Brand: Metra

2003-2007 fits NISSAN MURANO DOUBLE DIN INSTALL KIT (BLACK FINISH), WIRE HARNESS
2003_2007_fits_NISSAN_MURANO_DOUBLE_DIN_INSTALL_KIT_BLACK_FINISH_WIRE_HARNESS_01_zkwo Tagged: , , , , , , , , , .

90195 Tekonsha Brake Control with Wiring Harness FOR 2003-2007 GM

Posted on by
90195 Tekonsha Brake Control with Wiring Harness FOR 2003-2007 GM

90195 Tekonsha Brake Control with Wiring Harness FOR 2003-2007 GM
P3 Electronic Brake Control, for 1 to 4 Axle Trailers, Proportional with vehicle specific harness. P3 the industries most advanced electric trailer brake control. A true proportional braking system, P3 has several added features, making it the new standard for electric trailer brake controls. 5 storable setting options for pulling different trailers or preferences of multiple drivers. A distinct, easy-to-read LCD display with multiple screen color options. Up-Front controls provide easy access to all P3 features. Easy to understand diagnostics show output current, battery, brake, and output voltage. A flashing red warning system alerts user to No Trailer Brake situations. Select Electric over Hydraulic or Electric trailer brake mode. Screen information display in English, French or Spanish. The Original Boost feature allows for different levels of customized braking. Integrated Plug-N-Play port for 2-plug adapters. Snap-in mounting clip allows user to remove and store the control when not in use. Electric trailer brake control for up to 4 braking axles. The item “90195 Tekonsha Brake Control with Wiring Harness FOR 2003-2007 GM” is in sale since Thursday, December 6, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Trailer Brakes”. The seller is “trucksetc” and is located in 75098. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Brand: Tekonsha
  • Manufacturer Part Number: 901953015
  • Warranty: Limited Lifetime Warranty

90195 Tekonsha Brake Control with Wiring Harness FOR 2003-2007 GM
90195_Tekonsha_Brake_Control_with_Wiring_Harness_FOR_2003_2007_GM_01_qy Tagged: , , , , , .

2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec

Posted on by
2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec

2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec
This harness allows use of the factory VORTEC intake manifold and multec injectors. This Standalone is a Plug n’ Play design with FOUR wire hook-ups (switched power, constant power & ground connections required). Includes Detailed Installation Guide for Plug n’ Play Ease. All Engine & Transmission Sensor Connectors. ATO Style Fuse Block. Switched Power Ignition Relay. TCC / Switch Wiring. 2003, 2004, 2005, 2006, 2007 – Chevy, GMC, Cadillac & Hummer VORTEC engines with electronic throttle body & 4L80E transmissions. These Standalones are designed with a sliding grommet seal & 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. The item “2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec” is in sale since Thursday, April 18, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “euroecycles” and is located in Maitland, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Superseded Part Number: 0307VORTEC_DBW_80E
  • Modified Item: Yes
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Interchange Part Number: 0307VORTEC_DBW_80E
  • Type: Standalone Fuel injection & Transmission Harness
  • Manufacturer Part Number: 03-07LSVOR_DBW_80E
  • Other Part Number: 0307VORTEC_DBW_80E
  • Brand: eMoto
  • Fitment Type: Performance/Custom
  • Warranty: Yes
  • Mounting Hardware Included: Yes

2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec
2003_2007_LS_STANDALONE_WIRING_HARNESS_4L80E_VORTEC_Drive_By_Wire_Multec_01_ka Tagged: , , , , , , , , .

2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec

Posted on by
2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec

2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
Free adapter connectors TO CONVERT Harness TO EV6 or EV1 Injectors (only if needed). Please message us in Buyers notes if you need EV6 or EV1 connectors. Otherwise, if left blank, Delphi Multec connectors will be sent by default. This harness allows use of the factory VORTEC intake manifold and multec injectors. This Standalone is a Plug n’ Play design with FOUR wire hook-ups (switched power, constant power & ground connections required). Includes Detailed Installation Guide for Plug n’ Play Ease. All Engine & Transmission Sensor Connectors. ATO Style Fuse Block. Switched Power Ignition Relay. TCC / Switch Wiring. 2003, 2004, 2005, 2006, 2007 – Chevy, GMC, Cadillac & Hummer VORTEC engines with electronic throttle body & 4L80E transmissions. These Standalones are designed with a sliding grommet seal & 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. The item “2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec” is in sale since Thursday, April 25, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “ampmotorsport” and is located in Altamonte Springs, Florida. This item can be shipped worldwide.
  • Superseded Part Number: 0307VORTEC_DBW_80E
  • Modified Item: Yes
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Interchange Part Number: 0307VORTEC_DBW_80E
  • Type: Standalone Fuel injection & Transmission Harness
  • Manufacturer Part Number: 03-07LSVOR_DBW_80E
  • Other Part Number: 0307VORTEC_DBW_80E
  • PSI: Custom StandAlone Conversion Harness
  • Brand: AmpMoto
  • Fitment Type: Performance/Custom
  • Warranty: Yes
  • Mounting Hardware Included: Yes

2003-2007 LS STANDALONE WIRING HARNESS 4L80E DBW VORTEC 4.8 5.1 6.0 Multec
2003_2007_LS_STANDALONE_WIRING_HARNESS_4L80E_DBW_VORTEC_4_8_5_1_6_0_Multec_01_aqyp Tagged: , , , , , , .

2003-2007 Murano Car Stereo Radio Dash Trim Mounting Bezel Kit W Wiring Harness

Posted on by
2003-2007 Murano Car Stereo Radio Dash Trim Mounting Bezel Kit W Wiring Harness

2003-2007 Murano Car Stereo Radio Dash Trim Mounting Bezel Kit W Wiring Harness
Car Amps Online Parts Finder. Enter the year, make, & model to find parts for your car. Car Stereo Installation Kit. For Installing Aftermarket Stereo. When replacing your factory radio with an after-market car stereo, a dash kit is a must for a quick and professional looking installation. It will securely mount your new stereo in the dash and will result in a professional gapless finish between your radio and the dash. This kit has the climate controls built in and will provide a OEM fit. When replacing your factory radio with an after-market car stereo, a wire harness is a must for a quick installation. It eliminates cutting your OE radio plug helping to maintain your cars value. After connecting it, your install is simple as the wires will color-match and easily connect to the after-market stereo. Without a wiring harness you will have to cut the factory harness and then test each wire to connect to your radio. In addition, because you do not have to cut your OE radio plug off, using an wiring harness allows you to reinstall your factory receiver at a later time. Don’t be left without a radio when you install your new stereo. When replacing your factory radio with an after-market car stereo, many cars need an adapter that will plug into factory antenna cable. This adapter will make the installation very easy. The adapter included will convert your factory antenna cable connection to a standard motorola male output so it will plug right in to your new aftermarket receiver. Includes everything you need to install your new stereo. Connects the aftermarket stereo harness to the vehicles factory harness. Designed specifically to fit the compatible vehicles. Wiring harness will plug into the factory without cutting any wires. Standard color coded wires provide a consistent and simplified installation. Made from OEM quality materials. Dash kit for standard single or double DIN stereos. This dash kit will work with standard single or double DIN stereos. 2003 – 2007 Murano. Our warehouse is full of Accessories, Amps, In Dash Receivers, Speakers, and Sub. This item ships via UPS. The item should be unopened in the same condition they were received. We strive for 5 star feedback. If you feel we did not meet this please send us a message so that we can work with you to resolve the issue. The item “2003-2007 MURANO CAR STEREO RADIO DASH TRIM MOUNTING BEZEL KIT W WIRING HARNESS” is in sale since Saturday, September 7, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “carampsonline” and is located in Salt Lake City, Utah. This item can be shipped worldwide.
  • Brand: Metra
  • Manufacturer Part Number: 99-7612A + NWH-702 + NDAB

2003-2007 Murano Car Stereo Radio Dash Trim Mounting Bezel Kit W Wiring Harness
Tagged: , , , , , , , , , .

JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear

Posted on by
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear

JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
Honda Emblem Not Included – Reuse Factory Emblem. Precision injection molded – Direct replacement bumper. Product Descriptions: Upgrade your Honda’s appearance with our JDM Style front bumper cover with fog lights and grille conversion. Our bumpers are made from durable polypropylene which retains it’s shape better when compared to polyurethane components. Comes unpainted so that you can color match it to your vehicle’s OEM paint. Fog Lights are designed with better optics to further enhance night time visibility by maximizing light output. JDM Style Front Bumper Cover -Precision Injection Molded. Impact resistant and flexible. Direct install with no modification necessary. JDM Style Fog Lamps -JDM Style replacement fog lamps with upgraded optic and lenses. Computer designed reflectors offers excellent beam control while maximizing output. Lenses made of UV treated Polycarbonate JDM Style Front Grille -Simple Bolt-on Design. Stylish Chrome / Black Finish. Material: Front Bumper Cover – Polypropylene Front Grille – ABS Plastic Fog Light Lens – Polycarbonate. What’s in the box: 1 x JDM Style Front Bumper Cover 1 x JDM Style Front Grille 1 x JDM Style Clear Fog Lights 1 x Wiring Harness 1 x OE Style On/Off switch. What you might need to install: Basic hand Tools. Installation hardware not included – Reuse OE Hardware. Installation Instruction Not included. Hours of Operation: Monday-Friday 8:00a. We observe and close on all major holidays. The item “JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear” is in sale since Tuesday, December 5, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “autoonemotoring” and is located in Rowland Heights, California. This item can be shipped worldwide.
  • Brand: ATO
  • Other Part Number: 71121-SDA-A00 08V31-SDA-101 08V31-SDA-102 Wire Harness Fog Lamp
  • Warranty: 90 DAY
  • Interchange Part Number: 2003 04711-SDA-A90ZZ 04711-SDL-A90ZZ Foglights Grille Grill Trim
  • Color: Black, Chrome
  • Manufacturer Part Number: Replacement Conversion Upgrade 03 04 05 06 07 2007 2006 2005 2004
  • MPN: 193803
  • Material: Polypropylene, ABS Plastic
  • Surface Finish: Unpainted
  • Installation Instruction: Not included

JDM Style Front Bumper Cover Grille Fog Lights Honda Accord 2003-2007 Kit Clear
Tagged: , , , , , , , , , .

2003-2007 Murano Car Stereo Radio Dash Trim Bezel Kit W Bose Amp Wiring Harness

Posted on by
2003-2007 Murano Car Stereo Radio Dash Trim Bezel Kit W Bose Amp Wiring Harness

2003-2007 Murano Car Stereo Radio Dash Trim Bezel Kit W Bose Amp Wiring Harness
Car Amps Online Parts Finder. Enter the year, make, & model to find parts for your car. Car Stereo Installation Kit. For Installing Aftermarket Stereo. When replacing your factory radio with an after-market car stereo, a dash kit is a must for a quick and professional looking installation. It will securely mount your new stereo in the dash and will result in a professional gapless finish between your radio and the dash. This kit has the climate controls built in and will provide a OEM fit. When replacing your factory radio with an after-market car stereo, a wire harness is a must for a quick installation. It eliminates cutting your OE radio plug helping to maintain your cars value. After connecting it, your install is simple as the wires will color-match and easily connect to the after-market stereo. Without a wiring harness you will have to cut the factory harness and then test each wire to connect to your radio. In addition, because you do not have to cut your OE radio plug off, using an wiring harness allows you to reinstall your factory receiver at a later time. Don’t be left without a radio when you install your new stereo. When replacing your factory radio with an after-market car stereo, many cars need an adapter that will plug into factory antenna cable. This adapter will make the installation very easy. The adapter included will convert your factory antenna cable connection to a standard motorola male output so it will plug right in to your new aftermarket receiver. This amp integration wiring harness integrates with factory amplifiers using the RCA plugs seen pictured. These will plug into your aftermarket receiver to give you complete control over your cars stereo system and allowing you to dial in that perfect sound. Includes everything you need to install your new stereo. Connects the aftermarket stereo harness to the vehicles factory harness. Designed specifically to fit the compatible vehicles. Wiring harness will plug into the factory without cutting any wires. Standard color coded wires provide a consistent and simplified installation. Made from OEM quality materials. Dash kit for standard single or double DIN stereos. This dash kit will work with standard single or double DIN stereos. 2003 – 2007 Murano. Our warehouse is full of Accessories, Amps, In Dash Receivers, Speakers, and Sub. The item should be unopened in the same condition they were received. We strive for 5 star feedback. If you feel we did not meet this please send us a message so that we can work with you to resolve the issue. The item “2003-2007 MURANO CAR STEREO RADIO DASH TRIM BEZEL KIT W BOSE AMP WIRING HARNESS” is in sale since Saturday, September 7, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “carampsonline” and is located in Salt Lake City, Utah. This item can be shipped worldwide.
  • Brand: Metra
  • Manufacturer Part Number: 99-7612A + NWH-72A + NDAB

2003-2007 Murano Car Stereo Radio Dash Trim Bezel Kit W Bose Amp Wiring Harness
Tagged: , , , , , , , , , .

Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light

Posted on by
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light

Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Honda Emblem Not Included – Reuse Factory Emblem. Precision injection molded – Direct replacement bumper. Upgrade your Honda’s appearance with our JDM Style front bumper cover with fog lights and grille conversion. Our bumpers are made from durable polypropylene which retains it’s shape better when compared to polyurethane components. Comes unpainted so that you can color match it to your vehicle’s OEM paint. Fog Lights are designed with better optics to further enhance night time visibility by maximizing light output. JDM Style Front Bumper Cover -Precision Injection Molded. Impact resistant and flexible. Direct install with no modification necessary. JDM Style Fog Lamps -JDM Style replacement fog lamps with upgraded optic and lenses. Computer designed reflectors offers excellent beam control while maximizing output. Lenses made of UV treated Polycarbonate JDM Style Front Grille -Simple Bolt-on Design. Stylish Chrome / Black Finish. Front Bumper Cover – Polypropylene. Front Grille – ABS Plastic. Fog Light Lens – Polycarbonate. Front Bumper Cover – Black. Fog Lights Lens – Clear. What’s in the box. 1 x JDM Style Front Bumper Cover 1 x JDM Style Front Grille 1 x JDM Style Clear Fog Lights 1 x Wiring Harness 1 x OE Style On/Off switch. What you might need for installation. Installation hardware not included – Reuse OE Hardware. Installation Instruction Not included. We can also be reached at 626.442.0400 during normal business hour. Monday to Friday only (excluding Holidays). We are not responsible for carrier transit time. This information is provided by the carrier and excludes weekends and holidays. Designated trademarks and brands are the property of their respective owners. The item “Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light” is in sale since Friday, November 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “advanation” and is located in Rowland Heights, California. This item can be shipped worldwide.
  • Brand: ADV
  • Other Part Number: 71121-SDA-A00 08V31-SDA-101 08V31-SDA-102 Wire Harness Fog Lamp
  • Warranty: 90 DAY
  • Interchange Part Number: 2003 04711-SDA-A90ZZ 04711-SDL-A90ZZ Foglights Grille Grill Trim
  • Color: Black, Chrome
  • Manufacturer Part Number: Replacement Conversion Upgrade 03 04 05 06 07 2007 2006 2005 2004
  • MPN: 193800
  • Material: Polypropylene, ABS Plastic
  • Surface Finish: Unpainted
  • Installation Instruction: Not included

Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light
Tagged: , , , , , , , .

2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille

Posted on by
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille

2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
Honda Emblem Not Included – Reuse Factory Emblem. Precision injection molded – Direct replacement bumper. Product Descriptions: Upgrade your Honda’s appearance with our JDM Style front bumper cover with fog lights and grille conversion. Our bumpers are made from durable polypropylene which retains it’s shape better when compared to polyurethane components. Comes unpainted so that you can color match it to your vehicle’s OEM paint. Fog Lights are designed with better optics to further enhance night time visibility by maximizing light output. JDM Style Front Bumper Cover -Precision Injection Molded. Impact resistant and flexible. Direct install with no modification necessary. JDM Style Fog Lamps -JDM Style replacement fog lamps with upgraded optic and lenses. Computer designed reflectors offers excellent beam control while maximizing output. Lenses made of UV treated Polycarbonate JDM Style Front Grille -Simple Bolt-on Design. Stylish Chrome / Black Finish. Material: Front Bumper Cover – Polypropylene Front Grille – ABS Plastic Fog Light Lens – Polycarbonate. What’s in the box: 1 x JDM Style Front Bumper Cover 1 x JDM Style Front Grille 1 x JDM Style Clear Fog Lights 1 x Wiring Harness 1 x OE Style On/Off switch. What you might need to install: Basic hand Tools. Installation hardware not included – Reuse OE Hardware. Installation Instruction Not included. We are here to assist you! Contact a sales tech by clicking on Ask A Question! If your question or request is urgent, or regarding an order in process, please give us a call! Your satisfaction is important to us! Contact a sales advisor by clicking on the Ask A Question button for help processing a return. MY ORDER WAS DAMAGED IN TRANSIT. It is our responsibility to take care of it but they must be reported to us immediatly. YOU SENT ME THE WRONG ITEM! The item “2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille” is in sale since Friday, November 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “motorbyte” and is located in Rowland Heights, California. This item can be shipped worldwide.
  • Brand: MTB
  • Other Part Number: 71121-SDA-A00 08V31-SDA-101 08V31-SDA-102 Wire Harness Fog Lamp
  • Warranty: 90 DAY
  • Interchange Part Number: 2003 04711-SDA-A90ZZ 04711-SDL-A90ZZ Foglights Grille Grill Trim
  • Color: Black, Chrome
  • Manufacturer Part Number: Replacement Conversion Upgrade 03 04 05 06 07 2007 2006 2005 2004
  • MPN: 193801
  • Material: Polypropylene, ABS Plastic
  • Surface Finish: Unpainted
  • Installation Instruction: Not included

2003-2007 Honda Accord JDM Front Bumper Cover Clear Lens Fog Light Front Grille
Tagged: , , , , , , , , , .