Wire Wiring Harness

Bloodstone Guitar Works specialise in custom building a guitar to your specification, one that you can have the ultimate confidence in its feel, tone and playability and truly cherish. We also produce our own range of Handwound pickups and Handwired wiring looms and undertake upgrades, repairs and setups. LONG SHAFT Ready Built up Gibson Les Paul Wiring upgrade / Wiring Loom. Long Shaft Length (18mm thread) – See other listing for cheaper 10mm option. These wiring looms are Individually hand-wired from UK-sourced genuine parts using 22 gauge Gavitt vintage cloth covered wire. A drop in replacement and a great performance and reliability upgrade for all Les Pauls. Top quality matched components are used throughout and the “float wire” method is adopted where all wires are pulled tight and elevated so they make no contact with the control /baseplate. It takes a little longer to build but is definitely worth the effort to maximise performance. Matched CTS USA Custom Audio EVERSE Taper 500K or 250K (You choose) Split Shaft Volume & Tone Potentiometers – smooth linear volume and tone change (no bunching or on/off effect). 0.022uF Sprague “Orange Drop” Tone Capacitors – removes the thinness and harshness inherent with budget capacitors. Separate “treble bleed” mod for both pickups – no muddiness of tone when reducing the volume knob. Premium quality SwitchCraft / High quality import and No Switch option. Bridge earth wire supplied with heatshrink tube to twist join with exiting earth, solder and insulate. Easy to follow colour coded wiring diagram. Fully soldered together and includes all nuts screws and washers ready to fit to your guitar. Atched in-house to within 10 Ohms (CTS pots tolerance is +/- 20% so a 250K pot can vary from 200-300 Ohms). Now using the 715p version which is sonically superior to the commonly used 225p. This item is in the category “Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “bloodstoneguitarworks” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Brunei Darussalam, Egypt, Guernsey, Gibraltar, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Oman, Pakistan, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Kuwait, Philippines, Qatar, Vietnam.

• Jack socket type: Switchcraft 3/8\
• Switch type: SwitchCraft Switch Fitted
• To Fit: Electric Guitar
• Country/Region of Manufacture: United Kingdom
• Brand: Gibson
• Type: Loom

Kit de Contrôle Electronique specs. Vintage 50s – Condensateur à l’huile WD-Capa pour ES 330, ES 335 Gibson. E piphone C asino etc.. ES-33X-Vintage Guitar Wiring harness Kit for Gibson & Epiphone -WD Oil Capacitors. 1 Toggle Switch Switchcraft. USA 3 positions (Black tip). Non-inductive Mylar and Oil blue WD. Tone Caps 22nF 600V for very smooth and natural sound. Traditional look and vintage tone for their guitar at about 1/2 the price of Vitamin Q capacitors PIO (Paper In Oil) 22nF US Taihan “BLACK BEE”1500v (EP-4397-00) on special request (Condensateur à huile WD 22nF 600V pour un son vintage, régulier et naturel). (+) 4 Pots CTS Audio (Log) Vintage EP4386 500 Kohms Split Shaft. Cable: Braided Shield + Cloth Wire Gavitt 22 AWG (Câblage avec fil vintage blindé + gaine coton). Input Jack Switchcraft 1/4 (6,35 mm). Cette Offre ne comprend pas les boutons (qui peuvent être achetés en complément) Made in Brittany on request, does not includes Knobs. Cablage réalisé en Bretagne à la demande. Photos non contractuelles a titre indicatif – livré sur pièce de carton. Délais d’expédition variable selon disponibilité des composants et charge de travail. The item “Kit Control Electro cable ES-335 VINTAGE Wiring harness Gibson Epiphone ES-330″ is in sale since Saturday, April 20, 2013. This item is in the category “Instruments de musique\Guitares, basses, accessoires\Pièces, accessoires\Pièces détachées\Autres”. The seller is “fretdreamer” and is located in Locmaria Plouzané. This item can be shipped worldwide.

• MPN: ADPKITC-ES33x
• Brand: adpguitarparts
• Numéro de pièce fabricant: ADPKITC-ES33x
• Marque: adpguitarparts

Welcome To Tone Man Guitar. Tone Man Guitar prebuilt 50’s wiring kits will improve your guitars overall tone. Your sound will be stronger, tighter and improved clarity. Notes will open up. Elimination of some treble loss when you roll the volume down. Tone and volume controls are very responsive to each other and smoother. By rolling back your volume some you can clean up an over driven amp. You will not find a better product or selection. I recommend 50’s wiring for the best over tone performance. Our 59 Kit uses Paper In Oil K40Y vintage tone caps for improved overall performance. Excellent clarity, aged vintage warm and woody tones with improved sustainability. These caps are equal to or better than Bumble Bee or Vitamin Q’s. We have found no better tone cap. You will hear and feel the difference. This kit is for. Gibson or Epiphone DOT ES335 style. Plus ES330, ES345, Casino, ES339. Be sure and check component distance measurements, f hole size below and compare to your guitar. If you have a similar guitar that has the output jack located on the bottom of the guitar please add a note with the measurement from the switch to the edge of the guitar at jack location. I will need to extend the output jack wire length. Sheraton models: These models have a smaller f hole opening and will not allow a full size pot to feed thru. Suggest measuring the widest opening of the f hole before ordering for a Sheraton. What’s In The Kit. Bourn’s 500K audio taper short shaft pots (qty 4). Brass bushings, with nut and dress washer. Coarse 18 teeth spline. Paper In Oil (PIO) K40Y bridge tone cap 0.033uf. Paper In Oil (PIO) K40Y neck tone cap 0.015uf. Switchcraft 3-Way Short Toggle Switch with black tip. Carefully hand wired in secure and insulated. Vintage Gavitt Braided cloth push back wiring all wrapped with high quality shrink. Switchcraft ¼ inch Output Jack. Assembly Template Hard Board. All assembled except for final hook up of Pickups connections and grounds. Easy to read step by step installation instructions with a 50’s wiring diagram. Wiring harness is feed thru the f holes and requires opening in the widest part of the f hole no less than 1-1/8 to 1-3/16 inch min to be able to feed the harness into the hollow body easily. Template component measurements center to center. Volume to Volume 2.5″ Switch to Neck Volume 2″. Tone to Tone 2.5″ Switch to Jack 6.5″. Volume to Tone 2.5. We add an additional 1/2 to 1 inch extra wire run between components for installation flexibility. I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit. Select category knobs on left side. If you are not sure whether your guitar uses short (3/8″) or long (3/4″) shaft pots please check before ordering. Normally Pre-1977 Gibson Les Paul’s, Epiphone’s, SG’s, ES Series use short shafts. All Gibson Les Paul’s manufactured after 1976 use Long Shaft pots. This kit comes with Short Shaft. Visit our other store products to see our Long Shaft Pot harness’s. Note: If you have an imported guitar e. You may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns bushings. Although these harnesses are pre-assembled and tested they do require some soldering to connect the pickups and the output jack. A 25 30 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation. I can not be responsible if you damage a unit. In stock means I have the parts to build. Tone Man Guitar started from my own passion for music, knowledge of electronics and 50+ years of love for the guitar. The great tone from the 50’s and 60’s guitars is what I try to achieve. I guarantee the best parts and workmanship. I believe in good communication. We Want You To Be 100% Satisfied! Gary Tone Man Guitar. The item “The 59 ES335 Gibson Epiphone DOT Style Tone Prewired Wiring Harness PIO Caps” is in sale since Sunday, April 14, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Other Guitar Parts”. The seller is “tonemanguitar1″ and is located in Noblesville, Indiana. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• To Fit: Electric Guitar
• MPN: Does Not Apply
• Brand: Tone Man Guitar

Temporarily out of stock – check back next week. Consider our other listings with custom made harnesses including Coil split, Phase switching, Serial/parallel switching We have it ALL! And these options will unlock all the sonic capabilities of your guitar – it’s really already in your guitar – you just need to unlock the options with the right harness. Contains all you need to install the most complete kit available. This item is IN STOCK and ships immediately. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup. All hardware is 100% OEM. Shaft Diameter is M7, No need for drilling – direct fit for Epiphone. FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness, Shielded cables. 2x Alpha(JS) B500k on Volume pots. 2x Alpha(JS) A500k on Tone positions. Epiphone Toggle Switch – Finish: Chrome Off-white tip. Note: the depicted Orange/black tips are NOT included. 4 Pin Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. Hookup Diagram to your pickups. All pots are full size 24mm. Fits Epiphone LesPaul, SG, ES335 and other double humbucking Solid or Hollow Body Guitars Comes with all associated mounting hardware for Pots, Switch and output Jack. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listings. International Buyers Please Note. The item “Absolute Original Epiphone LP fits SG, ES335, Dot Wiring Harness -Alpha Pots OEM” is in sale since Sunday, February 10, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped to United States, all countries in Europe, Canada.

• Model: Epiphone
• To Fit: Les Paul, SG, ES335
• Modified Item: No
• Country/Region of Manufacture: Korea, Republic of
• California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and chromium (hexavalent compounds), which is known to the State of California to cause birth defects or other reproductive harm. Lead is used in electronics as part of the soldering process as well as on some component terminals as part of alloys to make soldering possible.
• MPN: JS8547
• Brand: Epiphone

Temporarily out of stock – check back next week. Consider our other listings with. Coil split, Phase switching, Serial/parallel switching. We have it ALL! And these options will unlock all the sonic capabilities of your guitar – it’s really already in your guitar – you just need to unlock the options with the right harness. Contains all you need to install the most complete kit available. This item is IN STOCK and ships immediately. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup. All hardware is 100% OEM. Shaft Diameter is M7, No need for drilling – direct fit for Epiphone. FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness, Shielded cables. 2x Alpha(JS) B500k on Volume pots. 2x Alpha(JS) A500k on Tone positions. Epiphone Toggle Switch – Finish: Chrome with Off-white tip. Note: the depicted Orange/black tips are NOT included. 4 Pin Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. Hookup Diagram to your pickups. All pots are full size 24mm. Fits Epiphone LesPaul, SG, ES335 and other double humbucking Solid or Hollow Body Guitars Comes with all associated mounting hardware for Pots, Switch and output Jack. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listings. International Buyers Please Note. The item “Epiphone LP fits SG, ES335, Wiring Harness Alpha Pots OEM ships Immediately” is in sale since Saturday, August 26, 2017. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Panama, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay.

• To Fit: Les Paul, SG, ES335
• Country/Region of Manufacture: Korea, Republic of
• California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and chromium (hexavalent compounds), which is known to the State of California to cause birth defects or other reproductive harm. Lead is used in electronics as part of the soldering process as well as on some component terminals as part of alloys to make soldering possible.
• MPN: JS8547
• Brand: Epiphone

Brand new design – 11/26/2017 – with Scrinia Engineering Phase shift pot. This item is IN STOCK and ships immediately. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup with coil split. All hardware is 100% OEM – with the addition of the Scrinia Engineering Phase Shift pot. Shaft Diameter is M7, No need for drilling – direct fit for Epiphone. (pickups used must be splittable). FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness on Plexiglass mounting plate, Shielded cables. Alpha(JS) B500k Linear taper Push/Pull (Coil Split) on Volume pots. Alpha(JS) A500k Audio taper with 47nF cap on Neck Tone position. Scrinia Engineering Phase shift pot A500k Audio Taper with 47nF cap on Bridge tone position. 5 Pin Quick Connect on the Push/Pull Pots. Epiphone Toggle Switch – Finish: Chrome w/ Black Tip. Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. Fits Epiphone LesPaul, ES335 and other double humbucking Solid or Hollow Body Guitars Comes with all associated mounting hardware for Pots, Switch and output Jack. Made by Epiphone, Improved by Scrinia Engineering. Adding Phase shifting pot on the Bridge Tone – provides 5 more sonic options. Pulling up on the bridge pickups tone control changes the neck pickups wiring to out of phase. This gives another four sonic possibilities with both pickups selected i. Bridge/phase + neck (bridge tone control up). Bridge/phase + neck Single Coil Split (bridge tone control up, bridge volume control up). Bridge Single Coil Split/phase + bridge (bridge tone and volume controls up). Bridge Single Coil Split/phase + bridge Single Coil Split (bridge tone and volume controls, and neck volume control, up). Although youd expect a phase change to sound different only if both the neck and bridge pickups are selected, the Single Coil Split allows for one more option. This 2019 version of the Harness includes Treble Bleed circuits. What does that mean – well. When you turn down the volume control on a vintage guitar, the tone changes too. The treble frequencies are attenuated, and the tone becomes somewhat dull. This is addressed on this version adding Treble Bleed circuit. This way you can maintain a better tone (less high frequency loss) even when you play subtle parts. We are the only suppliers of this part in the US. Note – Some manufacturing dates may show late 2018 – the harness was not released for sale until 2019 though – You will recognize a true Treble bleed harness by the added components which you will not find on the older designs. Note – installing the phase shift on the neck position instead is easily done – and will change the sonic table of options accordingly. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listing. Check my other listings – I have a full line of Quick Connect adapters for Pick Ups -OEM fit, for example this shielded version. The item “Epiphone Les Paul Pro Wiring Harness Coil Split and Phase Shift Push Pull NEW” is in sale since Sunday, November 26, 2017. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped worldwide.

• To Fit: Les Paul, SG, ES335
• Country/Region of Manufacture: Korea, Republic of
• California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and chromium (hexavalent compounds), which is known to the State of California to cause birth defects or other reproductive harm. Lead is used in electronics as part of the soldering process as well as on some component terminals as part of alloys to make soldering possible.
• MPN: Does Not Apply
• Brand: Epiphone

Brand new design with Scrinia Engineering Phase shift and Serial/Parallel Potentiometers. Note – New design launch 11/26/2017 – Serial/Parallel shift potentiometer – Never available before as a Plug’n’PLay solution for Epiphone. This item is IN STOCK and ships immediately. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup with coil split (pickups used must be splittable). All hardware is 100% OEM – with the addition of the Scrinia Engineering Phase Shift pot. Shaft Diameter is M8, No need for drilling – direct fit for Epiphone. FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness on Plexiglass mounting plate, Shielded cables. Alpha(JS) B500k Linear taper Push/Pull (Coil Split) on Volume pots – Now with Treble Bleed circuits. Scrinia Engineering Serial/Parallel shift pot A500k Audio Taper with 47nF cap on Neck tone position. Scrinia Engineering Phase shift pot A500k Audio Taper with 47nF cap on Bridge tone position. 5 Pin Quick Connect on the Push/Pull Pots. Epiphone Toggle Switch – Finish: Chrome w/ Black Tip. Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. On the bridge side – same procedure. Ground connections: a short wire between the tone pots GND connections and the soldering of the string bridge GND wire to any of the metal casings of the pots is all that is needed. Bridgetone is assured through the small connecting cables. Fits Epiphone LesPaul, ES335 and other double humbucking Solid or Hollow Body Guitars Comes with all associated mounting hardware for Pots, Switch and output Jack. Made by Epiphone, Improved by Scrinia Engineering. Adding Phase shifting pot on the Bridge Tone – provides Many more sonic options. This gives another four sonic possibilities with both pickups selected i. Bridge/phase + neck (bridge tone control up). Bridge/phase + neck Single Coil Split (bridge tone control up, bridge volume control up). Bridge Single Coil Split/phase + bridge (bridge tone and volume controls up). Bridge Single Coil Split/phase + bridge Single Coil Split (bridge tone and volume controls, and neck volume control, up). Although youd expect a phase change to sound different only if both the neck and bridge pickups are selected, the Single Coil Split allows for one more option. We have decided to install the S/P pot on the neck position as it gives the best tonal result in our opinion – but you are free to play “guitarist LEGO’s” with the pots- you can place them however you like phas switch on neck or bridge Tone positions or the other way around – FIND YOU OWN SOUND!! If you want you can even ask us for 2 serial/parallel pots – that way you will be able to… Well you get the picture – both neck and bridge in series, one in series the other in parallel etc-etc-etc…. We know what the phase shift does – it shifts the phase giving a narrow scooped sound. The Serial Parallel option gives other sonic options. When you switch the 2 coils of the humbucker in parallel mode results in a lower inductance than in series mode. This changes the frequency response of the humbucker to a more wide frequency response – i. We therefore feel it fits the neck position Humbucker best – but hey! You be the judge and swap it around as you like. This 2019 version of the Harness includes Treble Bleed circuits. What does that mean – well. When you turn down the volume control on a vintage guitar, the tone changes too. The treble frequencies are attenuated, and the tone becomes somewhat dull. This is addressed on this version adding Treble Bleed circuit. This way you can maintain a better tone (less high frequency loss) even when you play subtle parts. We are the only suppliers of this part in the US. Note – Some manufacturing dates may show late 2018 – the harness was not released for sale until 2019 though – You will recognize a true Treble bleed harness by the added components which you will not find on the old designs. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listing. International Buyers Please Note. The item “Epiphone Les Paul Wiring Harness Coil Split, Serial/Parallel + Phase Shift -NEW” is in sale since Sunday, November 26, 2017. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped to United States, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Bahrain, Croatia, Malaysia, Chile, Panama, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Canada, Taiwan, Philippines, Kuwait, Costa rica, Trinidad and tobago, Guatemala, Honduras, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands.

• To Fit: Les Paul, ES335
• Country/Region of Manufacture: Korea, Republic of
• California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and chromium (hexavalent compounds), which is known to the State of California to cause birth defects or other reproductive harm. Lead is used in electronics as part of the soldering process as well as on some component terminals as part of alloys to make soldering possible.
• MPN: Does Not Apply
• Brand: Epiphone

920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat. Note: You will have to ream the potentiometer holes out a little to fit the new pots. Introducing 920D Custom Shop’s Vintage Pre-Wired harness for the Epiphone Kat Series including the Wildkat and Alleykat. Just like our highly regarded Strat, Tele and LP harnesses this pre-wired harness uses only the finest electronic components, and is hand soldered in our 920D Custom Shop using Gavitt Braided Shielded Cable, the same wire that is used on Gibson Custom Shop guitars. Replace your stock harness with this premium harness today! All Wiring harnesses include Top Quality Electronic Components: Gavitt Braided Shielded Wire CTS 500K Audio Taper Pots Switchcraft 3 Way Toggle Switch Switchcraft Output Jack. Sigler Music Center has been in business for over 50 years. Sigler Music Center 1191 Sturgis Rd Conway, AR 72034. Accessories, software and manuals MUST be included. Pack your return securely and insure it. We do our very best to help customers when they request to return an item. Customer service is our first and foremost concern. However, there are a few items that are non-returnable. Although unlikely, on occasion an item gets damaged while in transit. Usually when a box shows some wear and tear, the product inside is in perfect condition. Please be sure to inspect the contents. If you receive a product that you believe is defective, message Sigler Music immediately to speak with a product specialist. If necessary, a return authorization will be provided. Please Note: Oversize items need to be repaired locally whenever possible. A Sigler Music team member can help you find a nearby service center. If your item arrives damaged or does not work, please contact our office immediately. The item “920D Custom Pre-Wired Wiring Harness for Epiphone Wildkat / Alleykat” is in sale since Wednesday, October 14, 2015. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Other Guitar Parts”. The seller is “sigler_music” and is located in Conway, Arkansas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Saint lucia, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Cambodia, Sri lanka, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Model: Epiphone Wildkat
• Country/Region of Manufacture: United States
• Brand: 920D Custom Shop
• MPN: WILDKAT

Ships from San Diego California. Please Note – this is The NEWEST version available from Epiphone. It comes with Treble Bleed circuits fitted to assure the best possible tone. Note: pictures do not show the circuit – rest assured you will receive the harness with this feature. Before you decide – please be aware that we have other versions of this same harness but with MORE SONIC OPTIONS, such as Phase and Serial/Parallel Switching option. We quality check all of them, and we back this product by our support staff of electronics engineers. If you have a question small or big – we know this product in out and can advise you on a dime. Original Epiphone Wiring harness – Direct fit for Epiphone Les Paul guitars with 2 humbucker setup with coil split. All hardware is 100% OEM. Shaft Diameter is M7, No need for drilling – direct fit for Epiphone. FYI Gibson Pots are 3/8, or 9.5mm – i. The “thicker potentiometer shafts”. Epiphone Wiring Harness on Plexiglass mounting plate, Shielded cables. Alpha(JS) B500k Push/Pull (Coil Split) on Volume pots -With OEM Treble Bleed. Alpha(JS) A500k on Tone positions. 5 Pin Quick Connect on the Push/Pull Pots. Epiphone Toggle Switch – Finish: Chrome w/ Black Tip. Quick connector on toggle switch cable. Epiphone 1/4 Output Jack Finish: Chrome. This 2019 version of the Harness includes Treble Bleed circuits. What does that mean – well. When you turn down the volume control on a vintage guitar, the tone changes too. The treble frequencies are attenuated, and the tone becomes somewhat dull. This is addressed on this version adding Treble Bleed circuit. This way you can maintain a better tone (less high frequency loss) even when you play subtle parts. We are the only suppliers of this part in the US. Fits Epiphone LesPaul, SG, ES335 and other double humbucking Solid or Hollow Body Guitars. Comes with all associated mounting hardware for Pots, Switch and output Jack. Note – Some manufacturing dates may show late 2018 – the harness was not released for sale until 2019 though – You will recognize a true Treble bleed harness by the added components which you will not find on the older designs. I recommend providing a residential address, that way you are certain it will not get lost on the workplace :o. Also Consider the absolute top of the line Control PCB for Les Paul, fits all control cavities including Epiphone with clover leaf cut out. Available in my other listing. International Buyers Please Note. The item “Epiphone Les Paul Pro Wiring Harness Coil Split Push/Pull Alpha Pots OEM! 2019″ is in sale since Wednesday, February 6, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “epiplug” and is located in San Diego, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Dominica, Grenada, Saint lucia, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• To Fit: Les Paul, SG, ES335
• Country/Region of Manufacture: Korea, Republic of
• California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and chromium (hexavalent compounds), which is known to the State of California to cause birth defects or other reproductive harm. Lead is used in electronics as part of the soldering process as well as on some component terminals as part of alloys to make soldering possible.
• MPN: Does Not Apply
• Brand: Epiphone