Wire Wiring Harness

1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible

Posted on by
1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible
1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible
1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible
1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible
1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible
1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible
1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible

1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible
OEM # 69558-94 dyna fxd. This part came off a carbureted 1994 Harley Davidson Dyna FXDL Dyna Low Rider with 59,092 known miles on it. It was lift tested to show the functionally of all working parts and the transmission for videos purposes. The vin number of the bike from which this part came from is 1HD1GDL11RY307671. The bike had an 80ci, 1340 cc Evolution Engine and a 5 speed transmission. We have the best tested parts in the industry, which leads to a hassle free experience for you, our valued customer. Please watch the video(s) below which show you what we know about the functionality of the various systems of the vehicle before we dismantled it for parts. Please review the pictures to the left. The yellow or orange arrow points to possible damage to the part followed by an up close picture of that same area. This does not necessarily mean that there is nothing else wrong with the item but rather a helpful eye. Please double check for fitment for your application. Please be sure to review the terms and conditions at the bottom of the page before purchasing. Mounting hardware (nuts, bolts, etc), even if shown in the picture is not absolutely guaranteed to come with the part. BRIEF DESCRIPTION OF THE PART AND/OR NOTICEABLE WEAR. Please study pictures for condition. Our Inspector noticed no other damage other than normal wear for the age of the part. This is a brief description of the part which could be in better or worse condition. This is the bike the part came off of. Additional notes: VIDEO TAKEN OF BIKE RUNNING, FRONT AND REAR LIGHTS, GAUGES AND SHIFT TEST. SHIFT TEST PERFORMED TO SHOW THAT TRANSMISSION IS WORKING. ELECTRICAL THAT IS WORKING: HEADLIGHT HIGH AND LOW BEAM, TAIL LIGHT AND HORN. CHARGING SYSTEM IS WORKING AND CHARGING AT 14.0 VOLTS. ADDITIONAL NOTES: BOTH FRONT SIGNALS ARE MISSING, BOTH REAR SIGNALS ARE MISSING, BRAKE LIGHT IS NOT WORKING. Pinwall Cycle Parts, Inc. Based in Massillon, Ohio is a LICENSED motorcycle salvage dealer by the State of Ohio and most states in the country. The company was started in 2005 as a small salvage parts supplier. By respecting our customer’s trust and focusing on providing you with quality salvaged parts at a fraction of new or after market prices, we have grown to be the largest indoor salvage powersports dealer in the United States. Our vehicles and their systems are tested even on a dyno machine and videoed prior to disassembly for you to review. We bring our showroom to you by accurately describing and photographing the honest condition of each unique part. Our staff has access to Microfiche schematics to assist you in cross referencing. But what does this mean to you? We recognize that the part you need is more than a part. It is the solution to getting you back on the road of freedom. Because our vehicles are legally obtained, you can expect compliance and integrity. Our parts are warehoused and not exposed to nature’s elements which will reduce the part’s integrity. Through our dyno testing videos, full disclosure of the part condition, secure warehousing and expedient service, we hope we exceed your expectations. The internet is not the only option. We hope you choose to be a part of the Pinwall family as your bike is a part of yours! So what is the small print? The parts are removed from salvage vehicles. Age and mileage should be considered in determining “normal wear”. We do our utmost to reflect each and every unique part’s condition so the description or lack thereof of a used item is a general description of this used part other than normal wear. We do not intentionally hide defects when photographing parts. We will not assume what you are looking for and we kindly ask not to assume anything about the parts. Some parts, even damaged parts, may not fit your application but are acquired by others for a unique solution. We do our utmost in full disclosure. Because we cannot control if a previous owner modified a bike, we cannot guarantee the OEM cross reference. For our customer’s safety, we do not sell used tires. We recommend replacing wear parts on your items prior to installation. For example, gaskets, fork seals, brake pads, bearings, etc and anything of the like, are not guaranteed by Pinwall Cycle parts, Inc. Frames, engines and major components come with a bill of sale from Pinwall Cycle Parts, Inc. Having the donor vehicle identification number from the vehicle the part came off of. For security reasons, the bill of sale will be mailed separately from the part. It is illegal to sell a dismantled vehicle frame with a title. In most states, the original vehicle identification number is replaced with a custom or assembled vehicle identification number and registered as an assembled built vehicle. Once your vehicle is assembled and inspected by your state it will no longer be registered as the year, make and model of the frame you are purchasing, but rather a custom built/assembled/special vehicle having the year in which your project was inspected by your state officials. This is generally how it works, but please check with your local state trooper inspection facility for clarification on their laws. Please understand your local DMV usually does not understand this process. States but all U. Custom values are accurately listed by law and we cannot change the price. Quotes are good for 14 days. If not paid by the 7th day, we reserve the right to relist or resell the item. Please do not assume anything about an item. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Electrical & Ignition Components\Wiring Harnesses, Cables & Connectors”. The seller is “pinwall_cycle_parts” and is located in this country: US. This item can be shipped worldwide.
  • Brand: HARLEY DAVIDSON
  • Manufacturer Part Number: 69558-94 dyna fxd
  • MPN: PIN 7668-05-0001

1994 Harley Davidson MAIN WIRE WIRING HARNESS FXDL FXDS Low Rider /Convertible
1994_Harley_Davidson_MAIN_WIRE_WIRING_HARNESS_FXDL_FXDS_Low_Rider_Convertible_01_ue Tagged: , , , , , , , , , .

1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS

Posted on by
1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS
1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS
1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS
1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS
1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS
1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS

1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS
This part came off a dyno tested carbureted 1995, Harley Davidson FXDL Dyna Low Rider with 42,470 known miles on it The vin number of the bike from which this part came from is 1HD1GDL18SY315319. The bike had an 80ci, 1340 cc Evolution engine and a 5 speed transmission. We have the best tested parts in the industry, which leads to a hassle free experience for you, our valued customer. Please watch the video(s) below which show you what we know about the functionality of the various systems of the vehicle before we dismantled it for parts. Please review the pictures to the left. The yellow or orange arrow points to possible damage to the part followed by an up close picture of that same area. This does not necessarily mean that there is nothing else wrong with the item but rather a helpful eye. Please double check for fitment for your application. Please be sure to review the terms and conditions at the bottom of the page before purchasing. Mounting hardware (nuts, bolts, etc), even if shown in the picture is not absolutely guaranteed to come with the part. BRIEF DESCRIPTION OF THE PART AND/OR NOTICEABLE WEAR. Please study pictures for condition. Our Inspector noticed no other damage other than normal wear for the age of the part. This is a brief description of the part which could be in better or worse condition. This is the bike the part came off of. Additional notes: VIDEO TAKEN OF BIKE RUNNING, FRONT AND REAR LIGHTS, GAUGES AND DYNO TEST. DYNO TEST PERFORMED TO SHOW THAT TRANSMISSION IS WORKING. ELECTRICAL THAT IS WORKING: HEADLIGHT HIGH AND LOW BEAM, BOTH FRONT SIGNALS, REAR RIGHT SIGNAL, TAIL/BRAKE LIGHT. CHARGING SYSTEM IS WORKING AND CHARGING AT 14.4 VOLTS. ADDITIONAL NOTES: HORN IS NOT WORKING, REAR LEFT SIGNAL IS MISSING. Pinwall Cycle Parts, Inc. Based in Massillon, Ohio is a LICENSED motorcycle salvage dealer by the State of Ohio and most states in the country. The company was started in 2005 as a small salvage parts supplier. By respecting our customer’s trust and focusing on providing you with quality salvaged parts at a fraction of new or after market prices, we have grown to be the largest indoor salvage powersports dealer in the United States. Our vehicles and their systems are tested even on a dyno machine and videoed prior to disassembly for you to review. We bring our showroom to you by accurately describing and photographing the honest condition of each unique part. Our staff has access to Microfiche schematics to assist you in cross referencing. But what does this mean to you? We recognize that the part you need is more than a part. It is the solution to getting you back on the road of freedom. Because our vehicles are legally obtained, you can expect compliance and integrity. Our parts are warehoused and not exposed to nature’s elements which will reduce the part’s integrity. Through our dyno testing videos, full disclosure of the part condition, secure warehousing and expedient service, we hope we exceed your expectations. The internet is not the only option. We hope you choose to be a part of the Pinwall family as your bike is a part of yours! So what is the small print? The parts are removed from salvage vehicles. Age and mileage should be considered in determining “normal wear”. We do our utmost to reflect each and every unique part’s condition so the description or lack thereof of a used item is a general description of this used part other than normal wear. We do not intentionally hide defects when photographing parts. We will not assume what you are looking for and we kindly ask not to assume anything about the parts. Some parts, even damaged parts, may not fit your application but are acquired by others for a unique solution. We do our utmost in full disclosure. Because we cannot control if a previous owner modified a bike, we cannot guarantee the OEM cross reference. For our customer’s safety, we do not sell used tires. We recommend replacing wear parts on your items prior to installation. For example, gaskets, fork seals, brake pads, bearings, etc and anything of the like, are not guaranteed by Pinwall Cycle parts, Inc. Frames, engines and major components come with a bill of sale from Pinwall Cycle Parts, Inc. Having the donor vehicle identification number from the vehicle the part came off of. For security reasons, the bill of sale will be mailed separately from the part. It is illegal to sell a dismantled vehicle frame with a title. In most states, the original vehicle identification number is replaced with a custom or assembled vehicle identification number and registered as an assembled built vehicle. Once your vehicle is assembled and inspected by your state it will no longer be registered as the year, make and model of the frame you are purchasing, but rather a custom built/assembled/special vehicle having the year in which your project was inspected by your state officials. This is generally how it works, but please check with your local state trooper inspection facility for clarification on their laws. Please understand your local DMV usually does not understand this process. States but all U. Custom values are accurately listed by law and we cannot change the price. Quotes are good for 14 days. If not paid by the 7th day, we reserve the right to relist or resell the item. Please do not assume anything about an item. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Wires & Electrical Cabling”. The seller is “pinwall_cycle_parts” and is located in this country: US. This item can be shipped worldwide.
  • Brand: HARLEY DAVIDSON
  • Manufacturer Part Number: 69558-95
  • MPN: PIN 7390-05-0001

1995 Harley Davidson Dyna FXD FXDL FXDS MAIN WIRE WIRING HARNESS
1995_Harley_Davidson_Dyna_FXD_FXDL_FXDS_MAIN_WIRE_WIRING_HARNESS_01_uck Tagged: , , , , , , , , .

2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom

Posted on by
2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom

2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
Main Wire Harness Wiring Loom. Comes with everything seen in the photos. 2005 Harley Davidson Dyna Low Rider FXDLI. All parts should be installed by a licensed mechanic. We will not be held liable for any buyers actions. We are a web based company so orders can be picked up from our location by appointment only. Listing and template services provided by inkFrog. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Wires & Electrical Cabling”. The seller is “invellop.cases” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, Ukraine, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Russian Federation.
  • Brand: Harley Davidson

2000-2006 Harley Davidson Dyna Low Rider FXDL Main Wire Harness Wiring Loom
2000_2006_Harley_Davidson_Dyna_Low_Rider_FXDL_Main_Wire_Harness_Wiring_Loom_01_yxsn Tagged: , , , , , , , , , , .