The BRP remote control is designed for more positive shifting and smoother throttle operation. The remote control handle features an exclusive design. Enabling right or left-hand installation. Along with a new thumb operated trim switch that is easier to use. The kit includes a key switch, emergency lanyard, warm-up lever, start-in-gear prevention switch, neutral lock and throttle friction adjustment, and warning horn. This control box and harness kit. Work with 1996 and new outboards. You may also need a trim harness (#175898). This control uses Type 479 cables. You will need two control cablesitem number #. Boat Throttle Control: Our side-mounted outboard remote control kit is compatible with Evinrude Johnson outboard motors. It’s made from aluminum ADC2+ASA and an ABS shell handle that resists cracking. The plastic button ensures firm and reliable operation. The Evinrude Johnson boat throttle control box is more robust and withstands multiple push-pull maneuvers. Smooth Operation: Press the neutral release button to shift into gear, Push forward about 32° into forward gear, and push back about 32° into reverse gear. The front-end friction adjustment adjuster provides personalized control over throttle operation, allowing you to manage speed and thrust with precision. Additionally, the boat throttle control has a cold start air-oil ratio adjustment function that ensures reliable operation in extreme temperatures. Trim and Tilt Switch: Enhance your boating experience with the power trim and tilt switch directly on the control lever handle. This design allows for easy adjustment of the stern engine’s position, aiding in cargo loading/unloading and preventing prolonged engine immersion. Press “? ” to tilt the engine upward and “? ” to tilt the engine downward. Emergency Stop Switch Lanyard: Our outboard engine throttle control box includes an emergency stop switch lanyard. This lanyard halts the engine automatically if the driver is unexpectedly displaced, preventing accidents. The lanyard can securely attach to the driver’s waistband or wrist for added security. 15FT Wiring Harness Cable: Comes with New System Check 15ft Main Modular Ignition Wiring Harness Cable, a 1.3 ft/400 mm long harness with an 6-pin plug and 3-pin plug and a 2.3 ft/700 mm cable with a 3-pin connector for the meter connection, ensuring ample reach for remote power supply setups. Crafted from durable thermoplastic material, these harnesses are built to last. During installation, turn off the ignition, remove the key, and disconnect all cables and power. (1) Wiring Harness MWS 15′ for 1996 & newer models, SystemCheck; (2) Conventional Tach Leads – when the System Check engine monitor tach is not used; (3) Trim gauge Leads; (4) Ignition – connect to a pre-wired control or Key Switch kit; (5) Trim Switch Connection – connect to Trim Switch in control handle or dash mounted (6) Trim Switch; (7) System Check Connection – Connect to a 2 gauge, tach with lights or horn driver module; (8) Horn Connection – horn is supplied with pre-wired controls and Key Switch kits. 1x Side mount remote control for BRP Johnson/Evinrude 1x 15FT harness cable 2x Key switch 1x Emergency lanyard 1x Pack of accessories 1x Manual.
