Wire Wiring Harness

Genuine Lucas main wiring harness. Suitable for T90 T100 T120 models 1966 w. Ith 88SA lighting switch. Comes complete with wiring diagram. This item is sent by recorded post. Check out my other items for more Triumph parts. All of the parts we sell are, unless otherwise stated, are newly made pattern parts, any reference made to OEM part numbers is purely for information only.

This will take the soldering work out of installing your new harness if you are not confident in your soldering skills in re-wiring your switches. This is everything you need from nose to tail to wire your bike. Includes detailed wiring instructions. We also sell the harness by itself, the dimmer and horn switches, as well as complete wiring clip kits to finish out your installation. We will be adding kits complete with the clips in the near future. If you don’t see them, just ask. We can add the wiring clips to your order. We also sell the correct cloth or vinyl covered throttle cables and brake cables for your Hummer and will be adding a cloth covered clutch cable in the near future. Used on the following. We work with a small and select group of vendors and dedicated craftsmen to bring you the very best restoration and repair parts for 1915 to 1984 Harley-Davidson motorcycles. We also offer a huge collection of restoration quality plain head, CP-1038, & CP-1035 bolts; fillister head & round head screws; correctly machined nuts & washers; fuel & oil lines; wiring harnesses; handlebar switches; air cooled spark plugs; clips, clamps, and ties in cadmium, parkerized, zinc, chrome, and raw finishes. The item “Harley 70322-53 Complete Hummer 1948-59 Wiring Harness With Wired Switches USA” is in sale since Wednesday, November 22, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “blarneyrubble104″ and is located in Cimarron, New Mexico. This item can be shipped worldwide.

• Manufacturer Part Number: 70322-53 71800-26A 71840-29
• Surface Finish: Cloth covered wiring asphalt looms chrome housings
• Warranty: No
• Brand: Cimarron Cycle Works
• Country/Region of Manufacture: United States

You will only need to crimp on some terminal ends to complete your wiring job. We can also put together a wiring clip kit to complete your wiring job, just tell us the year you are working on if you don’t see the clip kit in our store or cimarroncycleworks. This will take the soldering work out of installing your new harness if you are not confident in your soldering skills in re-wiring your switches. This harness is correct for use with the new seat post terminal box introduced in 1948 and the terminal plate under the tin on the Hydra-Glide front end and the single wire horn button is used with the Delco 16 horns which ground through their mount to the frame as well as the Jubilee horn in 1954 only. Starting in 1955, H-D used a two wire horn button on the big twin. We sell a kit for that as well. We do sell a wiring kit for you 1948 Panhead owners which is all the correct wires for the spring forks which you would also use if you have one of the rare 1949 springer Panheads. This is everything you need from nose to tail to wire your bike. We also sell the harness by itself, the dimmer and horn switches, as well as complete wiring clip kits to finish out your installation. We will be adding kits complete with the clips in the near future. If you don’t see them, just ask. Used on the following. We work with a small and select group of vendors and dedicated craftsmen to bring you the very best restoration and repair parts for 1915 to 1984 Harley-Davidson motorcycles. We also offer a huge collection of restoration quality plain head, CP-1038, & CP-1035 bolts; fillister head & round head screws; correctly machined nuts & washers; fuel & oil lines; wiring harnesses; handlebar switches; air cooled spark plugs; clips, clamps, and ties in cadmium, parkerized, zinc, chrome, and raw finishes. The item “Harley Panhead 1949-54 Wiring Harness With Wired Lamp Harnesses & Switches USA” is in sale since Tuesday, December 26, 2017. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “blarneyrubble104″ and is located in Cimarron, New Mexico. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Surface Finish: Cloth covered wiring asphalt looms chrome housings
• Manufacturer Part Number: 70321-48 71800-26A 71840-29 67753-48
• Brand: Cimarron Cycle Works
• Warranty: No

UP TO 16 APE HANGER HANDLEBAR WIRING HARNESS WITH BLACK SWITCHES HARLEY 96-06. Brake Calipers & Brake Pads. Brake Drums & Sprockets. Brake Rotors & Pulleys. Chain Belt Guards Chain/belts. Clutch Primary Drive Line. Batteries Boxes Covers Related. Headlight & Spotlight Related. Turn Signals & Tail Lights. Carburetor & Air Cleaner. Engine Parts & Covers. Oil Filters & Lubricants. Oil Tanks & Brackets. Exhaust Vance & Hines. Exhaust / Mufflers Related. Forward Foot Controls Related. Dash Speedo Instrument Related. Gas Tanks & Caps Related. Hardware Kits Axles Spacers. Luggage Tour & Saddlebags. Swingarms & Wide Drive Kits. Front & Rear Suspension. Front Ends DNA Wide Glide 41mm. Front End Fork Tubes 39 & 41mm. Front End Sliders & Lower Legs. Front End Vintage Springer. Front End DNA Springers. Triple Trees / Fork Related. Handle Bars & Controls. Hand Controls Levers Related. Mirrors Chrome & Black. Motorcycle Shop Misc Tools. Wheel Bearings Axles & Spacers. Wheels 40 Spoke Billet Hub. Wheels 60 Spoke Billet Hub. Wheels 80 Spoke Billet Hub. Wheels 80 Spoke Kc Int. Wheels Custom Mag Wheel Sets. Wheels Dna Extreme Motocross. Wheels DNA Fatty 40 Fat Spoke. Wheels Ultima 48 Fat spoke. Wheels Dna Mammoth 52 Fat Spoke. Complete kit left and right with black switches. The wires are 48 long to fit the tallest handlebars. Color coded to match the OEM wires. Kit comes complete with wire conectors. Below are photos of many other items related to the item listed above. THANK YOU FROM KCINTERNATIONAL – KCINT! WARNING Limitation of Liability: KC International Motorcycle Supply (KCInt) shall not be held liable for any damages that result from the Improper installation of parts, use, control, alteration or maintenance of motorcycles. Improper installation can cause serious injury, death and/or property damage. We recommend that all parts are installed by a licensed motorcycle dealer which is certified to work on Harley Davidson® motorcycles. This dealer must use good judgment in helping customers in the selection of parts for installation. KC International Motorcycle Supply (KCInt) has no control over the judgment of others and assumes no responsibility or liability of any nature for the failure of others to use good judgment. This also includes wrongful or negligent on behalf of you or any person acting on your behalf. Image Permission: Images used in our ads are the property of KC International Motorcycle Supply (KCInt) and have embedded watermarks not visable to the eye. KC International Motorcycle Supply (KCInt) has the right to change, edit or terminate the terms and conditions at any time without prior notice. All sales from KC International Motorcycle Supply (KCInt) constitutes an understanding and agreement to all policies, terms, and conditions set forth by KC International Motorcycle Supply. If there is a issue with your order we will try to contact you as soon as possible. Payments must be made in U. In some parts of the country it is illegal to receieve or use some of our products. It is up to the customer to determine the items that are illegal in your area. KC International Motorcycle Supply, Inc. The following terms are affiliated with KC International Motorcycle Supply: KCINTERNATIONAL, KCINT, KCInternational. Founded in 1978, KCInt built its reputation by providing high-quality after market motorcycle parts to its customers with courteous service. We provide quality products at competitive prices to our customers. We have many hard to find parts for those early motorcycles and the newest creations for your latest custom motorcycle project. Order any time, you never have to wait to place a large order. To save time, please have your card information ready when ordering. RETURN INFORMATION Any item. Item must be unused and in sale-able condition. KC International Motorcycle Supply (KCInt) is not responsible for any charges for labor, repairs, materials, down-time or lost profits due to returning any merchandise. RETURN AUTHORIZATION Before returning any item, please notify us so that we can provide you with a. And we will give you specific instructions on how to proceed with your return. To speed authorization, please provide us with the invoice number, order number, and order date when you call. Dayton, OH 45420 Tel. The item “UP TO 16 APE HANGER HANDLEBAR WIRING HARNESS WITH BLACK SWITCHES HARLEY 96-06″ is in sale since Friday, May 8, 2015. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Other Electrical & Ignition”. The seller is “kcint” and is located in Dayton, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation.

• UPC: Does Not Apply
• Brand: KCINT
• Manufacturer Part Number: 50-11157-05 / 12093 / 820-50862 / 482653

Part: Handlebar Wiring Harness with Switches and Hardware Drag Specialties 74660-HC9 Applications. 1973 Harley Davidson XLH1000. 1973 Harley Davidson XLCH. 1973 Harley Davidson FLH Electra Glide. 1973 Harley Davidson FX Super Glide. 1974 Harley Davidson FX Super Glide. 1974 Harley Davidson FXE Super Glide. 1974 Harley Davidson XLH1000. 1974 Harley Davidson XLCH. 1974 Harley Davidson FLH Electra Glide. 1975 Harley Davidson XLCH. 1975 Harley Davidson FLH Electra Glide. 1975 Harley Davidson FXE Super Glide. 1975 Harley Davidson XLH1000. 1975 Harley Davidson FX Super Glide. 1976 Harley Davidson FXE Super Glide. 1976 Harley Davidson XLH1000. 1976 Harley Davidson XLCH. 1976 Harley Davidson FLH Electra Glide. 1976 Harley Davidson FX Super Glide. 1977 Harley Davidson FLH Electra Glide. 1977 Harley Davidson XLT. 1977 Harley Davidson FX Super Glide. 1977 Harley Davidson FXE Super Glide. 1977 Harley Davidson FXS Low Rider. 1977 Harley Davidson XLH1000. 1977 Harley Davidson XLCH. 1978 Harley Davidson FXE Super Glide. 1978 Harley Davidson FXS Low Rider. 1978 Harley Davidson XLH1000. 1978 Harley Davidson XLCH. 1978 Harley Davidson FLH Electra Glide. 1978 Harley Davidson XLT. 1978 Harley Davidson FX Super Glide. 1978 Harley Davidson XLS Roadster. 1979 Harley Davidson FXEF Fat Bob. 1979 Harley Davidson FLH Electra Glide. 1979 Harley Davidson FXS Low Rider. 1979 Harley Davidson XLS Roadster. 1979 Harley Davidson FLHC Electra Glide Classic. 1979 Harley Davidson FXE Super Glide. 1979 Harley Davidson XLH1000. 1979 Harley Davidson XLCH. 1980 Harley Davidson FXE Super Glide. 1980 Harley Davidson XLH1000. 1980 Harley Davidson FXB Sturgis. 1980 Harley Davidson FXWG Wide Glide. 1980 Harley Davidson FLHC Electra Glide Classic. 1980 Harley Davidson FLH Electra Glide. 1980 Harley Davidson FXS Low Rider. 1980 Harley Davidson XLS Roadster. 1980 Harley Davidson FXEF Fat Bob. 1981 Harley Davidson FLHC Electra Glide Classic. 1981 Harley Davidson FLH Electra Glide. 1981 Harley Davidson XLS Roadster. 1981 Harley Davidson FXWG Wide Glide. 1981 Harley Davidson FXEF Fat Bob. 1981 Harley Davidson FXE Super Glide. 1981 Harley Davidson FXS Low Rider. 1981 Harley Davidson XLH1000. 1981 Harley Davidson FXB Sturgis. Available in a complete 48in. Kit for left and right sides. Completely soldered together, ready to install; color-coded to match OEM specifications. Includes switches, wire connectors, buttons, screws, stoplight switch rubber boot and switch retaining plates. The item “Handlebar Wiring Harness with Switches and Hardware Drag Specialties 74660-HC9″ is in sale since Thursday, April 2, 2015. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Switches”. The seller is “jawzys” and is located in Hinckley, Ohio. This item can be shipped worldwide.

• UPC: Does Not Apply
• Manufacturer Part Number: 74660-HC9
• Brand: Drag Specialties
• Part Number: 75-8856
• MPN: 74660-HC9
• Product Photo: Generic Product Representation

The harness is designed for models from Federal registration number 618.025 and lower. In addition to the USA made harness kit, you get an NOS keyed black out ignition switch, an NOS front black out lamp switch, a pre-wired European reproduction dimmer switch and horn button. Comes with detailed instructions to install the wiring on your bike. You will receive the following. USA made harness for SN 618.025 and lower (check your Palmer book or other military references as to how that correlates with your actual VIN number). New old stock WW-II military surplus 7 pole keyed black out switch & NOS black out lamp toggle switch (do note there is a small paint chip on the black out detent button). Tail lamp harness with the correct twist fit connectors to fit your rear black out lamps. We can also offer a full kit of wire loom clips and clamps to correctly route your wires and we can supply a kit which also includes oil pressure and brake switches, rear black out lamps, dash with bulbs, etc. And can pre-wire the dash for you. We also sell the harness by itself, the dimmer and horn switches, as well as complete wiring clip kits to finish out your installation. We will be adding kits complete with the clips in the near future. If you don’t see them, just ask. Used on the following. We work with a small and select group of vendors and dedicated craftsmen to bring you the very best restoration and repair parts for 1915 to 1984 Harley-Davidson motorcycles. We also offer a huge collection of restoration quality plain head, CP-1038, & CP-1035 bolts; fillister head & round head screws; correctly machined nuts & washers; fuel & oil lines; wiring harnesses; handlebar switches; air cooled spark plugs; clips, clamps, and ties in cadmium, parkerized, zinc, chrome, and raw finishes. The item “Harley 4736-42M 1942-45 WLA Premium Wiring Harness Kit with NOS Switches USA” is in sale since Tuesday, December 10, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Antique, Vintage, Historic”. The seller is “blarneyrubble104″ and is located in Cimarron, New Mexico. This item can be shipped worldwide.

• Surface Finish: Cloth covered wiring asphalt looms
• Manufacturer Part Number: 4736-42M 4972-42 4527-41M
• Brand: Cimarron Cycle Works, Harley-Davidson
• Warranty: No

HANDLEBAR WIRING HARNESS W/BLACK SWITCHES FOR ALL HARLEY MODELS 1982-95 REPL OE. Brake Calipers & Brake Pads. Brake Drums & Sprockets. Brake Rotors & Pulleys. Chain Belt Guards Chain/belts. Clutch Primary Drive Line. Batteries Boxes Covers Related. Headlight & Spotlight Related. Turn Signals & Tail Lights. Carburetor & Air Cleaner. Engine Parts & Covers. Oil Filters & Lubricants. Oil Tanks & Brackets. Exhaust Vance & Hines. Exhaust / Mufflers Related. Forward Foot Controls Related. Dash Speedo Instrument Related. Gas Tanks & Caps Related. Hardware Kits Axles Spacers. Luggage Tour & Saddlebags. Swingarms & Wide Drive Kits. Front & Rear Suspension. Front Ends DNA Wide Glide 41mm. Front End Fork Tubes 39 & 41mm. Front End Sliders & Lower Legs. Front End Vintage Springer. Front End DNA Springers. Triple Trees / Fork Related. Handle Bars & Controls. Hand Controls Levers Related. Mirrors Chrome & Black. Motorcycle Shop Misc Tools. Wheel Bearings Axles & Spacers. Wheels 40 Spoke Billet Hub. Wheels 60 Spoke Billet Hub. Wheels 80 Spoke Billet Hub. Wheels 80 Spoke Kc Int. Wheels Custom Mag Wheel Sets. Wheels Dna Extreme Motocross. Wheels DNA Fatty 40 Fat Spoke. Wheels Ultima 48 Fat spoke. Wheels Dna Mammoth 52 Fat Spoke. Fits 1982-95 Big Twin and Sportster models. Handlebar wiring harness kit comes with 48 long color coded wires and cover sheath. Black switches are attached for both right and left sides. Below are photos of many other items related to the item listed above. THANK YOU FROM KCINTERNATIONAL – KCINT! WARNING Limitation of Liability: KC International Motorcycle Supply (KCInt) shall not be held liable for any damages that result from the Improper installation of parts, use, control, alteration or maintenance of motorcycles. Improper installation can cause serious injury, death and/or property damage. We recommend that all parts are installed by a licensed motorcycle dealer which is certified to work on Harley Davidson® motorcycles. This dealer must use good judgment in helping customers in the selection of parts for installation. KC International Motorcycle Supply (KCInt) has no control over the judgment of others and assumes no responsibility or liability of any nature for the failure of others to use good judgment. This also includes wrongful or negligent on behalf of you or any person acting on your behalf. Image Permission: Images used in our ads are the property of KC International Motorcycle Supply (KCInt) and have embedded watermarks not visable to the eye. KC International Motorcycle Supply (KCInt) has the right to change, edit or terminate the terms and conditions at any time without prior notice. All sales from KC International Motorcycle Supply (KCInt) constitutes an understanding and agreement to all policies, terms, and conditions set forth by KC International Motorcycle Supply. If there is a issue with your order we will try to contact you as soon as possible. Payments must be made in U. In some parts of the country it is illegal to receieve or use some of our products. It is up to the customer to determine the items that are illegal in your area. KC International Motorcycle Supply, Inc. The following terms are affiliated with KC International Motorcycle Supply: KCINTERNATIONAL, KCINT, KCInternational. Founded in 1978, KCInt built its reputation by providing high-quality after market motorcycle parts to its customers with courteous service. We provide quality products at competitive prices to our customers. We have many hard to find parts for those early motorcycles and the newest creations for your latest custom motorcycle project. Order any time, you never have to wait to place a large order. To save time, please have your card information ready when ordering. RETURN INFORMATION Any item. Item must be unused and in sale-able condition. KC International Motorcycle Supply (KCInt) is not responsible for any charges for labor, repairs, materials, down-time or lost profits due to returning any merchandise. RETURN AUTHORIZATION Before returning any item, please notify us so that we can provide you with a. And we will give you specific instructions on how to proceed with your return. To speed authorization, please provide us with the invoice number, order number, and order date when you call. Dayton, OH 45420 Tel. The item “HANDLEBAR WIRING HARNESS WithBLACK SWITCHES FOR ALL HARLEY MODELS 1982-95 REPL OE” is in sale since Monday, August 15, 2016. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Other Electrical & Ignition”. The seller is “kcint” and is located in Dayton, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Maldives, Oman, Reunion, Sri lanka.

• UPC: Does Not Apply
• Brand: KCINT
• Manufacturer Part Number: 60-SW-230-06 / 12068 / 18-230

Here is a BRAND NEW Power Vent Window Wiring Harness and a pair of BRAND NEW door switches. Wiring is all 14 gauge THHN with all GM connectors. The new switches have the door panel clips as well. These parts are for all GM cars from 1961 through 1968. They will also work for all GM cars up to 1972 that have crank operated vent windows. I have a vast collection of GM car parts and options from the 1960’s and 1970’s and even some from the late 1950’s. Also in the collection are some Chrysler, Lincoln and Ford parts. One of my specialties are power antennas. The item “Power Electric Vent Window NEW Wiring Harness & Switches 61 62 64 65 66 67 68 GM” is in sale since Saturday, January 11, 2020. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Interior\Window Parts”. The seller is “fdr19473″ and is located in Spring Hill, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Aruba, Brunei darussalam, Bolivia, Egypt, Guadeloupe, Iceland, Sri lanka, Luxembourg, Oman, Paraguay, Uruguay, Antigua and barbuda, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, French guiana, Guernsey, Gibraltar, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Monaco, Macao, Martinique, Maldives, Nicaragua, Pakistan, Reunion.

• Brand: Chevrolet
• Placement on Vehicle: Left

NEW 12 CIRCUIT UNIVERSAL WIRE HARNESS MUSCLE CAR HOT ROD STREET ROD NEW XL WIRES WITH IGNITION, HEADLIGHT AND DIMMER SWITCHES. This kit has circuits for A/C, Ignition/Battery, Gauges, Brake switch, Flasher, Headlight, Wiper, Ignition, Battery/Hazard, Ignition On, ACC 1, Heater and, ACC 2. Includes Wire Loom, Fusible Link and, Butt Connectors. THIS KIT ALSO INCLUDES IGNITION SWITCH, HEADLIGHT SWITCH AND DIMMER SWITCH. This wiring kit features a thick coating over the copper wire. The gauge of the wiring ranges from 10 gauge to 18 gauge depending on what the wire is for. The wires are GM color-coded and, labeled. The item “Universal 12 Circuit Wiring Harness Hot Rod Street Rod Muscle Car with SWITCHES” is in sale since Wednesday, February 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “bro-speed” and is located in Corona, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Manufacturer Part Number: Does Not Apply
• Brand: SAE-SPEED
• Warranty: 1 Year
• Product Type: Ignition Wires
• Type: Wiring Harness