Wire Wiring Harness

1999 – 2003 VORTEC STANDALONE WIRING HARNESS DRIVE BY CABLE with 4L60E TRANSMISSION. Fits 1999 – 2003 VORTEC 4.8L, 5.3L, 6.0L engines with Multec Injectors, 5 PIN MAF Sensor, Mechanical Throttle Body & 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. These harnesses are designed for’99 -’03 Vortec play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal. The item “1998-2003 VORTEC STANDALONE WIRING HARNESS 4L60E Tran 4.8 5.3 6.0 DBC Multec” is in sale since Thursday, April 18, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “euroecycles” and is located in Maitland, Florida. This item can be shipped worldwide.

• Manufacturer Part Number: 99-03_VOR_60E-DBC-LS1
• Brand: eMoto
• Custom Bundle: No
• Non-Domestic Product: No
• Fitment Type: Performance/Custom
• Modified Item: No
• Superseded Part Number: 99-03_VOR_60E-DBC-LS1
• Type: LS1 Standalone Wiring Harness
• Warranty: Unspecified Length
• Other Part Number: 99-03_VOR_60E-DBC
• Country/Region of Manufacture: United States
• Interchange Part Number: 99-03_VOR_60E-DBC

Universal Supercharger Heat Exchanger w/ Fans & Plug & Play Wiring Harness NEW. Keep those IAT’s down with this universal air to water heat exchanger with dual electric fans & plug and play harness. Great for summer heat or sitting in traffic! You will need to fabricate your own mounting brackets for your specific car and also run plumbing and pump. Plug and play harness plugs directly into the fans, has a built in relay, fuse, and switch. Total measurements w/ brackets & fans: 37″x10.5″x4.25. The item “Universal Supercharger Heat Exchanger with Fans & Plug & Play Wiring Harness NEW” is in sale since Wednesday, January 31, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Other”. The seller is “hawksmotorsports” and is located in Easley, South Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bahamas, Viet nam, China, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Martinique, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Uruguay, Russian federation.

• Warranty: 90 Day
• Other Part Number: 7909
• Brand: Hawks Motorsports
• Fitment Type: Performance/Custom
• Manufacturer Part Number: FHP20-16898

Looking for the best in aesthetics, weight savings and reliability out of your harness? Our Pro Series harness completely replaces your old OEM harness so you can forget about those electrical gremlins. This Wiring Specialties PRO Series harness was designed from the ground-up to exceed OEM specifications for wire quality, power/ground routing. With our optimized and’tucked’ approach the end result will be a clean and worry free installation with a guaranteed start up. This harness is specifically engineered for a BMW E30 (82-93) with the GM LS1 Cable Throttle engine swap. It was developed in house on an actual LS1 engine in an E30 chassis to ensure a perfect fit to all engine connections. Wiring Specialties offers a number of options for common performance upgrades for this product. Build your perfect harness by selecting from the available options to the right, and as always – if you have any questions, please reach out to us. SUPPORTED ENGINES: Gen 3 Drive By Cable LS1/Vortec. Any LS1 from 2004 Pontiac GTO. DRIVE BY CABLE THROTTLE ONLY. Factory Speedometer, Tachometer, Alternator Warning light, wipers and reverse lights remain functional. Optional Factory Gauge Sensor Adapters retain the factory BMW Oil Pressure and Coolant Temp cluster functionality. The adapters are also machined to support most aftermarket temperature and pressure gauges that require a 1/8-27 thread pitch. Will require the use of E30 BMW (Original BMW sensors) Oil and Temp sensors (1-wire). PRO-SERIES HARNESS TECHNICAL SPECS. Plug and Play simple and efficient. NO CORE HARNESS or additional wiring required. OEM wire colors used, where applicable. Fireproof fiberglass sleeving used in high-temp sections near the manifold & turbo (-40°C/-40°F to +450°C/+845°F operating temperature). Point-to-Point continuity tested on every wire. Constructed using exact OEM connectors and seals. Made with high temp TXL wire with adhesive shrink tubing (-40°C/-40°F to +125°C/+257°F operating temperature). Wrapped in lightweight nylon loom (-94°C/-137°F to +125°C/+257°F operating temperature). Includes a charge harness and improved grounds. Fully tested after production for an easy plug-and-play installation. Main Engine and Transmission one-piece tucked harness. Alternator charge cable built into the main harness. Knock sensor sub-harness connector. MAFS connector (3-pin or 5-pin). Intake Air Temp connector. Bank 1 and Bank 2 Coil interface connectors (coil harnesses are optional). Oil Pressure gauge connector. Wiring for 2 PCM-controlled electric cooling fans. Bank 1 and Bank 2 FRONT Oxygen sensor connectors (High Temp shielding). 1 x Ground ring terminal. ECT sensor connector and cluster coolant temp switch connector. Reverse lights sensor connector. A/C Wiring is available as an option. Please note that adding A/C to an LS1 S13 is not easy and will require custom lines and sensor installation. Wiring Specialties will provide a wiring sub-harness needed for operating the A/C system ONLY. Printable install instructions with pictures. Turn Key ENGINE START Guarantee. FAQ & OTHER DETAILS. LS PCM Tachometer Adjustment – The LS1 PCM Startup Tune includes setup of the tachometer signal to work on your chassis. Signal conditioning is generally not required. Startup PCM Flash Tune. GM LS1 PCMs require basic tuning in order to run the LSx engine in a different chassis such as the 240sx, 300zx, Datsun etc. The VATS alarm or Immobilizer will prevent the engine from starting unless it is disabled. The standard base startup tune is VATS / EVAP / Rear O2 / Fuel Tank Purge removal. Most tunes leave the other parameters stock. No performance settings are changed with this startup tune – fuel map changes are NOT part of this service. Alternator Charge Cable – This item ties the starter/battery directly to the Alternator output, which allows the improved power routing on our harness to eliminate the wire running from the alternator to the fusebox and/or battery while still charging the battery normally. Grounding Kit – Our Kit ties a number if engine components to the body of the car and ensures that you will not have issues resulting from poor grounds. The Grounding Kit utilizes Ultra High temp fiberglass sleeving to allow installation under or around exhaust components. Very flexible mounting options allow you to connect the block, head, battery tray, alternator case and chassis to completely eliminate all grounding issues. Speedo Signal Conditioning – The Dakota Digital SGI-5 unit for Speed can’condition’ the signal to compensate for cross-platform swaps. If the Option exists to ADD the unit on the harness page for your swap, then you need it for proper speedo operation. Please note that some transmissions (350z, BMW ZF and S15 Silvia for example) do not have a speed sensor and will require a non-harness based solution like a GPS speedo. Plug-n-Play vs Universal – Plug-n-Play harnesses connect to your car’s underhood fuse box for power and to connectors under the dash for gauges etc. Universal harnesses do not need an underhood fusebox to connect to and the wiring for gauges and warning lights is provided as a’flying lead’ which are bare wires labeled with their function. Right Hand Drive (RHD) Conversions – If you used ALL the stock LHD chassis connectors for your RHD swap, order the LHD version of the harness. If you used ALL the clip/swap RHD chassis connectors, order the RHD version of the harness. Don’t See It? Chances are we can do it! Battery Cables / Battery Relocation – The battery must be connected to the starter, so you need a battery cable from the positive battery terminal to the starter main power lug. Typically this positive battery cable also powers up the main under hood fusebox, which runs many of the non-engine items on your car like interior lights, dash power and headlights/taillights. Please make sure you have prepared for this as each install is different. Type of Return Request. The item “Wiring Specialties Engine Tranny Harness LS1 into BMW E30 Pro Series” is in sale since Sunday, October 16, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Charging & Starting Systems\Other”. The seller is “autocat51″ and is located in West Covina, California. This item can be shipped worldwide.

• Brand: WSP
• Manufacturer Part Number: WRS-LS1E30-COMBO
• California Prop 65 Warning: WARNING: The items in this ebay listing are found to have compounds and chemicals known to the State of California to cause cancer, birth defects, and reproductive harm:

Es handelt sich hier um 2 nagelneue und unbenutzte Audi S6 Tagfahrleuchten mit den Vergleichsnummern 4F0 941 067 A und 4F0 941 068 A (4F0941067A / 4F0941068A) inklusive passendem Anschlußset. Die S6 Gitter oder sogar Komplettsätze mit Steuergerät gibt es bei uns im Shop auch. Auch einzelne Leuchten oder nur Kabel sind auch lieferbar. Die Kabel sind ca. 1 Meter lang und die Steckergehäuse sind original von Audi. In den Steckergehäusen sind auch Gummiabdichtungen damit alles absolut wasserdicht ist. Bei Fragen hierzu nutzen Sie bitte ausschließlich folgende Emailadresse. The item “Audi A6 S6 LED Tagfahrleuchten TFL Tagfahrlicht mit Kabel Stecker original ULO” is in sale since Thursday, June 16, 2016. This item is in the category “Auto & Motorrad\ Teile\Autoelektronik, GPS & Sicherheitstechnik\Elektronikzubehör\Einbaurahmen & Radioblenden”. The seller is “vw-audi-teile-spezi” and is located in Emden. This item can be shipped worldwide.

• Modell: A6 / S6
• Fahrzeugmarke: Audi
• Hersteller: Kfz-Service Viertel
• Herstellernummer: nicht zutreffend
• Referenznummer(n) OEM: 4F0941067A

One brand new 1965 Chevrolet Impala SS Under Dash Wiring Harness with Console Shift Automatic Transmission and Gauges. Includes complete fuse box assembly. The back half of fuse box has the bulkhead connector for engine and forward light harnesses. Interior half of fuse box is original style BUS fuses. This has connections for. Ignition switch and light socket. Heater control, heater blower resistor. Back up switch/neutral safety switch. Dimmer switch, E-brake warning buzzer. Turn signal switch and many others required for the under dash wiring. Made in the USA. Fits: 1965 Impala SS with console shift automatic transmission with gauges no AC. The item “1965 Chevy Impala SS Under Dash Wiring Harness Console Shift Automatic Gauges” is in sale since Tuesday, February 27, 2018. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “24kaccents” and is located in Niagara Falls, New York. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Surface Finish: Wiring Harness
• Manufacturer Part Number: CG59219
• Brand: American Auto Wire
• Warranty: Yes
• California Prop 65 Warning: This product can expose you to a chemical known to the state of California to cause cancer or reproductive harm

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 07-09 LS2 (6.0L) Drive by Wire 58X Standalone Wiring Harness. 2007-09 Trailblazer SS 58X LS2 Engines with 6L80E/6L90E. Requires use of E38 ECM/T43 TCM. (Gray 58X Crank Reluctor Only). Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. These harnesses are designed for retrofitting. With 6L80E or 6L90E transmissions. Into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through. New Jersey – 08724. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. Gen IV Engines require ” E38 ” ECM, contact. Harness is designed to use EV6 fuel injectors, and 58x Crank Sensor. Gen IV Drive by Wire harnesses are designed to use Corvette 6 Pin Accelerator Pedal , available through. Harnesses are available for 4L60E Electronic Automatic, 4L80E electronic automatic, T56 Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “2007-2009 LS2 (6.0L) 58X PSI STANDALONE WIRING HARNESS With6L80E” is in sale since Wednesday, February 26, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Manasquan, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam, China, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Uruguay.

• Modified Item: No
• Custom Bundle: No
• Manufacturer Part Number: HAR-1078
• Non-Domestic Product: No
• Warranty: Yes
• Part Brand: PSI

This harness is a 3 wire MAF and a 1 wire alternator. TH350 TH400 power-glide 700R4 or nonelectric transmission. Our Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak-proof installation. All of our harnesses are designed with the Highest quality in mind. All Harnesses have extended wiring (ADDED 36 FOR EASY COMPUTER MOUNTING). We have full GM Color Codes. All Factory OE connectors. 100% HANDMADE , right here in the U. The harness comes with a complete install instruction packet. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. MADE IN THE U. The item “1997-2006 DBC LS1 STANDALONE WIRING HARNESS T56 or Non-Electric Tran 4.8 5.3 6.0″ is in sale since Monday, May 20, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “templeracingco” and is located in Las Vegas, Nevada. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Modified Item: No
• Custom Bundle: No
• Manufacturer Part Number: Ls1Harenss-T56
• Brand: TRC
• Non-Domestic Product: No

866 MATTSGM Benicia, Ca. Classic Update Wiring Harness Kit. Please note: Classic Update Kits do not support Ammeters. Classic Update Kits give you one of the most complete kits on the market to “Make Wiring THAT Easy”. They are designed for specific year, make, and model configurations. The kit boasts many features making it the most complete system of its type in the industry! Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered Halogen headlights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. NEW ATO Fusebox fits in center of the firewall away from heater and A/C ducts andallows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for running a stock Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility andallows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead wires with proper molded light socket connections, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. NEW floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). The early GM/FORD generators and externally regulated alternators are just not up to the task of providing power to an expanded wiring system like these classic update kits. The point of this kind of kit is really to allow people a way to upgrade and expand their wiring system and so an alternator upgrade is usually part and parcel to this kind of upgrade. NOTE: These kits are recommended for MODIFIED original vehicles, not OEM restoration projects. Note: This wiring is designed to work on Internally regulated alternator and have a 12v feed for the coil/distributor/ignition box. This kit IS NOT set up with a resistance wire for a standard, points type ignition system. It is wired with a full 12 volt primary ignition feed that is hot in both the start and run positions. It will support HEI, MSD, other electronic ignition systems, as well as computerized Fuel Injec- tion systems. If you wish to run a points type system, there are illustrations on the engine connection pages to do so. Extra parts that are not included in this kit will be required to complete that operation. (see our other items). Thank you for shopping at Matts Classic Bowties. Sell Smarter with Kyozou. Inventory and Ecommerce Management. The item “American Auto Wire 1964 65 66 Ford Mustang Wire Harness 510125″ is in sale since Tuesday, January 30, 2018. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “mattsclassicbowties” and is located in Bellmawr, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Martinique, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: American Auto Wire AAW
• Manufacturer Part Number: 510125
• Country/Region of Manufacture: United States
• Warranty: Yes

866 MATTSGM Benicia, Ca. Classic Update Series Front Light Rally Sport Headlight Wiring Kit – 1967 Camaro. Designed specifically for use with American Auto Wire’s Classic Update Series 500661. 1967 Chevrolet Camaro using the 500661 harness. This harness provides all connections to the Rally Sport electric motors, limit switches and relay panel located in the left front fender. Kit also includes the ignition and headlight switch diode jumper harness. Thank you for shopping at Matts Classic Bowties. Sell Smarter with Kyozou. Inventory and Ecommerce Management. The item “American Auto Wire 1967 Camaro RS Front Headlight Wiring Harness Kit 500773″ is in sale since Monday, January 8, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Headlights”. The seller is “mattsclassicbowties” and is located in Bellmawr, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Viet nam, Uruguay.

• Brand: American Auto Wire AAW
• Manufacturer Part Number: 500773
• Placement on Vehicle: Front

LED Foglights with Wire Harness Switch For Kia Sorento 2019+ 4 Eyes Fog Light. Made with Durable ABS Plastic. Upgrade your vehicle today with these LED conversion Fog Lights. Note: Only Fit Basic Bumper. Replace your broken fog lights with these upgraded units. Stylish and bright fog lights make night time driving a joy. Computer designed, they offer excellent beam control while maximizing output. Fog and Driving Lights illuminate the dark, penetrate the fog, producing bright far reaching beams of light in front of your vehicle, making driving safer and easy. These Lamps especially provide you with increased visibility while you are maneuvering through fog. LED Lights are Included. Lenses made of Polycarbonate. Connector to factory Harness Included. Wire Harness included -Plug and Play -On/Off Switch included -4 Eyes Style. ABS Plastic – Housing. What’s in the box. 1 x Pair of LED Lights (Left, Right) 1 x Pair of Fog Light Bezels (Left, Right) 1 x Wire Harness 1 x On/Off Switch. What you might need for installation. Installation hardware not included – Reuse OE Hardware. Installation instructions are not included. Monday to Friday only (excluding Holidays). We are not responsible for carrier transit time. This information is provided by the carrier and excludes weekends and holidays. Designated trademarks and brands are the property of their respective owners. 241255 / SKU: 5-FOG-KISO19L-BASE-C6 / TITLE: LED Foglights with Wire Harness Switch For Kia Sorento 2019+ 4 Eyes Fog Light. The item “LED Foglights with Wire Harness Switch For Kia Sorento 2019+ 4 Eyes Fog Light” is in sale since Tuesday, April 23, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Fog/Driving Lights”. The seller is “advanation” and is located in Rowland Heights, California. This item can be shipped worldwide.

• Other Part Number: Upgrade Conversion Replacement On Off Control DRL Left Right L LX
• Warranty: 90 DAY
• Color: Black
• Fitment Type: Performance/Custom
• Manufacturer Part Number: 19 2019 Fog Light Lamp Foglights Foglamps Lamps Wire Harness LED
• MPN: 241255
• Material: ABS plastic, Polycarbonate
• Placement on Vehicle: Front, Left, Right
• Brand: ADV
• Interchange Part Number: Lights Foglight Glossy Black Bezel Four Eyes 4 Eyes On/Off Switch
• Note: Only Fit Basic Bumper
• Surface Finish: Glossy
• Installation instructions: Not included