Wire Wiring Harness

BMW E30 wiring harness Adapter to Install/Swap engine M50/S50 from E36/E34. This wiring harness was developed to allow you to install / swap an E36 engine into a E30 car. The BMW E30 wiring has a 20 pin plug at the engine bay, while the E36 uses a 25 pin plug at the engine bay. With our adaptor cable you only need to connect it between the 20 pin and 25 pin connectors. This adapter was developed and tested to the following engines M50, M52, S50, S52 from E36 or E34. If your BMW E30 is before 7/1987 you must add 2 cables to the wiring harness with 2 single pins included. For the installation, you will have a guide to help and explain you what to do. We Speak English, Portuguese, French and German. Most items will be sent within 24 hours. Please check out our feedback! VAT invoice: all our items include a VAT invoice supplied with the goods. Please tell us your VAT number for correct invoice. The item “BMW E30 wiring harness Adapter Install/Swap engine M50 M52 S50 S52 from E36/E34″ is in sale since Wednesday, August 02, 2017. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “bruno_steering” and is located in Leiria. This item can be shipped worldwide.

• Brand: Unbranded
• Manufacturer Part Number: BLA010

27W LED Fog Lights w/ Bezels Brackets Wiring For 11-16 F250 F350 F450 Super Duty. Each complete kit comes with (2) 27W high power LED driving lamps, fog lamp mounting brackets, fog bezel covers, and a relay and switch wiring system with an on/off switch. Each LED fog light is powered with 9 pieces of 3W diodes for extremely high output and maximum visibility at night. This makes for a good upgrade from your OEM halogen fog lamps or a powerful addition to any non foglight models. Compatible for 2011 to 2016 Ford F250 F350 F450 Super Duty Trucks. Complete kit comes with (2) 27W high power LED driving lamps with foglamp mounting brackets, fog bezel covers and relay wires with on/off switch. Each high power LED fog light is powered by 9 pieces 3W LED diodes for a super bright lighting output. Good for replacing the OEM halogen fog lamps or upgrade for the non foglight models as well. IJDMTOY (MotoringMax) was founded in 2004 and has since become one of the largest automotive LED lighting retailers in the United States. We are located in Los Angeles, California and carry the most complete LED replacements for all cars, SUVs, and trucks. And we will do our best to assist you in resolving any issues. Your satisfaction is our utmost concern. We are not responsible for international duty or custom charge. The item “27W LED Fog Lights with Bezels Brackets Wiring For 11-16 F250 F350 F450 Super Duty” is in sale since Friday, March 10, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Fog/Driving Lights”. The seller is “motoringmax” and is located in El Monte, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

• Brand: iJDMTOY
• Interchange Part Number: 9 x 3W Square Driving Auxiliary Pod Lite
• Manufacturer Part Number: 70-924
• Other Part Number: iJDMTOY Exact Replacement LED DRL Daylight Series
• UPC: Does not apply
• Warranty: 90 Day

Allison 1000 3rd Generation 5 speed stand alone wire harness, other components are needed to ensure this harness will work properly. FOB GULF BREEZE, FL. The item “Allison 1000 3rd Generation 5 Speed Wire Harness see detail” is in sale since Friday, May 04, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Automatic Transmission & Parts\Automatic Transmission Parts”. The seller is “kfhbear” and is located in Gulf Breeze, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica.

LS Series Stand Alone Wiring Harness With Blue Red OEM ECU. All CBM Motorsports harnesses are completely plug and play with switched power, constant power and ground connections required. Harnesses are professionally constructed from brand new GM Delphi connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. This is not a modified OEM harness. Every clip, connector and pin is brand new. All blunt cut wires are clearly labeled for easy installation. We use genuine weather pack Delphi plugs for every connection (not knock off China plugs). This is a show quality harness and uses all expandable sleeving, not cheap plastic split loom. All wires are correct AWG and have shrink wrap at each end. Every harness comes with a four foot lead to mount the computer under a seat, inside the passenger compartment, on a firewall, etc. The package comes with a water tight relay pack and fuse holder. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Complete Engine and Transmission Wiring Harness including. All engine and transmission sensor connectors. Switched Power Ignition Relay. If available in our tune inventory, we are happy to place a baseline tune in the computer at no additional cost. We are CBM Motorsports based out of Rancho Cucamonga, CA. We specialize in high performance engines for off road vehicles, hot rods, classic cars, drag cars, rock crawlers, boats, and custom vehicles. We carry many specialty parts for the Chevrolet LS series engines, Cadillac Northstar and Shortstar, Chevrolet Ecotec, and finally the classic Chevrolet small and big block. If you are looking for more power out of your current set up or want to build an engine from the ground up look no further. We have a GM world-class certified technician with nearly 20 years of experience and an in house dynamometer. We offer tuning services, engine repair, engine swaps, and custom fabrication. We also have ASE certified technicians and a MECP certified professional. If you are local, please come visit our showroom and see what one of the largest engine suppliers in the nation has to offer. We leave feedback automatically once the item has been paid for. We consider our feedback VERY IMPORTANT. Let us know if there was a mistake made during your order and we will do our best to resolve the issue. We make sure every customer is 100% satisfied no matter the size of the order. Please understand we are a business and appreciate every one of our customers. Custom-made parts may take longer. Please understand Saturday, Sunday & Holidays. If you would like your package. Please let us know and we would be happy to add it to the quote. UPS will not deliver to P. If you are not satisfied with your part or accessory for any reason, you may return it within 14 days of receipt of your order. You may return products that. Do not have missing parts. Are in their original packaging. Are not damaged, previously installed, or used. Were not custom built, painted, or modified for your application. Track Page Views With. Auctiva’s FREE Counter. The item “CBM-LSBRHECU LS Series Stand Alone Wiring Harness With Blue Red OEM ECU” is in sale since Friday, September 13, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “custombuiltmotors” and is located in Colton, California. This item can be shipped worldwide.

• Manufacturer Part Number: CBM-LSBRHECU
• Warranty: Yes
• Brand: CBM Motorsports
• Country of Manufacture: United States
• Part Brand: CBM Motorsports

Brand new American Autowire Classic Update Series Wiring Harness Kit. Complete Wiring Kit – 1964-67 Chevelle For. Chevrolet El Camino 1964. Chevrolet El Camino 1965. Chevrolet El Camino 1966. Chevrolet El Camino 1967. Note: El camino and Station Wagon models will require 500999 rear body parts kit which is available at an additional cost. Replacement headlight switch with internal 30 amp circuit breaker included. Retention collar nut, adjustable length shaft, and custom knob are also included. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box designed to fit in original location. All required hardware supplied. New ATO fuse allows easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all aftermarket accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies! (Exclusive to American Autowire) 5. Steering column connectors will plug directly into most aftermarket steering columns as well as 1969 and later GM columns which utilize stock GM turn signal switches The original column can also be wired by using the supplied mating connector and terminals. Original Dash Panel instrument cluster connector. Along with wiring for your original dome/interior lighting, we have included separate underdash light sockets. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. All original terminals, connectors (exclusively from American Autowire), and light sockets are also supplied for original cluster gauges. However, the best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, COVAN CLASSICS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. New ignition switch is included with indexed connector. Additionally, the system comes with column mounted ignition switch connectors for adapting late model columns. Rear body harness assembly is designed to plug into the main harness in the original location. Flexibility in harness design allows for original or custom routing. Rear body wiring includes backup light wires and mating connectors for backup light leads. License plate lead, connectors, and terminals included. Fuel tank sender wire and terminal included. Youll find all the original style light socket pigtails packed into every aspect of this system making it the most complete system of its type in the industry! New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. GM bulkhead connectors for the engine and front light wiring are included and ready for installation. Original routing of the new harness without any body modifications! Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). The item “64-67 Chevelle Malibu SS American Autowire Classic Update Wiring Harness #500981″ is in sale since Thursday, April 28, 2016. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “supermuscleparts” and is located in Bellmawr, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Brand: American Autowire
• Manufacturer Part Number: 500981
• Warranty: Yes
• Country/Region of Manufacture: United States

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 03 -’07 Vortec Drive by Wire Standalone Wiring Harness. Application’03 -’07 Chevy, GMC, Cadillac, and Hummer Vortec Engines with Electronic Throttle Body and T56, Manual, or Non-Electronic Transmissions (TH400, TH350, Powerglide). Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’03 -’07 Vortec engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Note: If using an LS style car intake with EV1 fuel injectors please order HAR-1017. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 03 -’07 Vortec Engines require’03 -’07 Vortec (Blue & Green) PCM (Service Number 12586242), contact. Harness is designed to use Multec fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. Vortec Drive by Wire harnesses require 8 pin Throttle Body (GM P/N 12570800 or equivalent) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0″ is in sale since Saturday, April 14, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: HAR-1015
• Warranty: Yes
• Part Brand: PSI

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 03 -’07 Vortec Drive by Wire Standalone Wiring Harness. Application’03 -’07 Chevy, GMC, Cadillac, and Hummer Vortec Engines with Electronic Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’03 -’07 Vortec engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Note: If using an LS style car intake with EV1 fuel injectors please order HAR-1016. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 03 -’07 Vortec Engines require’03 -’07 Vortec (Blue & Green) PCM (Service Number 12586242), contact. Harness is designed to use Multec fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. Vortec Drive by Wire harnesses require 8 pin Throttle Body (GM P/N 12570800 or equivalent) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0″ is in sale since Wednesday, December 06, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, South africa, New Zealand.

• Manufacturer Part Number: HAR-1014
• Warranty: Yes
• Brand: PSI

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 06 -’15 LS2/LS3 Drive by Cable (DBC). 2006 – 20 15 24X LS2 CORVETTE, GTO, TRAILBLAZER SS, SSR; CONVERTING TO DRIVE BY CABLE. WITH T56, MANUAL, OR NON-ELECTRONIC AUTOMATIC TRANSMISSIONS. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. These harnesses are designed for Gen IV applications above which originally were Drive By Wire throttle body. The harness will allow for Drive by Cable throttle function with these newer engines and include the correct EV6 injector connectors and provisions for low mount knock sensors and front mounted cam sensor. If using a 58x Engine (LS3, etc) then a Lingenfelter Crank Signal Converter box (available through PSI) is required so the 411 PCM (Red/Blue Connectors) can be utilized. The factory E38 or E67 controller does not have the ability to operate a cable throttle body. If using a 24x LS2 no converter box is required, however a 411 PCM (Red/Blue Connectors) is required. This harness is for retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Please contact PSI for more information. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. Requires’99 -’04 LS1 PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use EV6 fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, 5 wire MAF, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “2006-2013 GEN IV LS2/LS3 PSI STANDALONE WIRING HARNESS WithT56 (DBC)” is in sale since Sunday, March 10, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: HAR-1059
• Warranty: Yes
• Part Brand: PSI

1959-60 Impala Wiring Harness Kit. American Autowire Part Number: 510217 Yogi’s Part Number: AAW510217. This Item is in Stock in our Monticello, Iowa Warehouse Now! A replacement headlight switch with internal 30 amp circuit breaker, retention collar nut, adjustable length shaft, and custom knob. Standard turn signal and hazard flashers are mounted on fuse panel. A new horn relay is mounted on the main dash harness. Fuse box designed to fit in original location with mods to the firewall, template included. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies – an American Autowire exclusive feature. Steering column connectors can plug directly into most aftermarket steering columns or stock 1959-60 GM columns that use stock GM turn signal switches. Separate under dash courtesy lamps for use along with your original dome/interior lighting. Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. Original terminals and connectors (another American Autowire exclusive) are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as AUTOMETER, CLASSIC INSTRUMENTS, STEWART WARNER, VDO, and others. Rear body harness assembly plugs into the main harness in the stock location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes backup light lead wires with correct lamp sockets or connectors, stop and tail light lead wires with correct lamp sockets, terminals, connectors and lamp sockets to mate with the license plate lamp, and fuel tank sender wire with trunk grommet and tank connection. New floor dimmer switch is provided for ease of installation. Wire length and connection accommodate original floor mount dimmer switch. GM bulkhead connectors for the engine and front light wiring are included (another American Autowire exclusive) and allow for easy installation with original or custom routing. Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM “SI” series internally regulated alternators. GM “CS” series alternator adapter is available separately. Front lighting includes extra long leads that can be routed for stock or optional appearances. All head light, parking light and directional light connectors and terminals are provided along with a switched trigger wire for an electric fan relay (usually recommended with AC). Original style light sockets, switch body connectors, terminals, etc. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. The item “American Autowire 1959-60 Impala Wiring Harness Kit 510217″ is in sale since Tuesday, May 06, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 510217
• Other Part Number: AAW510217
• Warranty: Yes
• Part Brand: American Autowire
• Country of Manufacture: United States

American Autowire Part Number: 510347 Yogi’s Part Number: AAW510347. This Item is in Stock in our Monticello, Iowa Warehouse Now! Classic Update Kits give you one of the most complete kits on the market to Make Wiring THAT Easy. They are designed for specific year, make, and model configurations. The 1973-82 Chevy / GMC Truck Kit is no exception. The kit boasts 12 features making it the most complete system of its type in the industry including. A replacement headlight switch with internal 25-amp circuit breaker, adjustable length shaft, and custom knob. Standard turn signal flasher, hazard flasher, and horn relay mounted on harness. Fuse box designed to fit in original location with no mods to the firewall. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Steering column connectors can plug directly into most aftermarket steering columns or stock 1975 and up GM columns. Can also be mated to earlier columns using the adapter and terminals included in the kit. Separate under dash courtesy lamp assemblies are also included for use along with your original dome/interior lighting feeds. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. Original terminals and connector that will plug into the original gauge cluster (another American Autowire exclusive) are provided. The system will also connect into most popular aftermarket gauges such as DAKOTA DIGITAL, CLASSIC INSTRUMENTS, AUTOMETER, VDO, and others. Rear body harness assembly plugs into the main harness at the main bulkhead disconnect location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes backup light lead wires and connectors along with stop and tail light lead wires and connectors. License plate lamp lead connection, as well as the fuel tank sender lead connection is also included. Original style lamp sockets and side markers for fleet side and original style molded connections for step side rear lamps are included. New floor dimmer switch is provided for ease of installation. Wire length and connection accommodate original floor mount dimmer switch. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, electric choke, and electric speedometer (if needed). A heavy gauge alternator feed and fusible link are also included for any typical high output 1 wire or internally regulated alternator. Connectors supplied for power and tach leads for GM style H. Distributors along with various oil and temp senders. Front lighting includes extra long leads that can be routed for stock or optional appearances. All head light, parking light, and directional light leads, along with a switched trigger wire for an electric fan relay (usually recommended with AC) are provided. Mating terminals and connectors are also provided for you to complete your custom installation. New parking lamp socket and side marker lamp sockets are also included. Has been in the business of providing classic car and street rod parts and accessories for over 35 years. This means you get it faster! This item ships in the continental USA by ground transport. The item “American Autowire 1973-82 Chevy Pickup Truck Wiring Harness Kit 510347″ is in sale since Friday, September 05, 2014. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “yogisinc” and is located in Monticello, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: 510347
• Other Part Number: AAW510347
• Warranty: Yes
• Part Brand: American Autowire
• Country of Manufacture: United States