Wire Wiring Harness

Sigler Music is proud to be the exclusive US reseller of 920D Custom products. If you have a special&###xA0;or custom item that you’d like to order, please contact 920D Custom directly. The’Summer of Love’ doesn’t have to end- the’69 Strat pickups have the tone you’ll fall in love with. Own the tone that defined an era. For a short period in the late 60’s, Fender used a height staggered Alnico 5’s and a special grey bobbin which produced clear, transparent highs and thumping lows. See our other items. Sigler Music Center has been in business for over 50 years. Sigler Music Center 1191 Sturgis Rd Conway, AR 72034. Accessories, software and manuals MUST be included. Pack your return securely and insure it. We do our very best to help customers when they request to return an item. Customer service is our first and foremost concern. However, there are a few items that are non-returnable. Although unlikely, on occasion an item gets damaged while in transit. Usually when a box shows some wear and tear, the product inside is in perfect condition. Please be sure to inspect the contents. If you receive a product that you believe is defective, message Sigler Music immediately to speak with a product specialist. If necessary, a return authorization will be provided. Please Note: Oversize items need to be repaired locally whenever possible. A Sigler Music team member can help you find a nearby service center. If your item arrives damaged or does not work, please contact our office immediately. The item “Fender Custom Shop’69 Stratocaster Pickup Set Plus 5 Way Wiring harness” is in sale since Friday, November 13, 2015. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Pickups”. The seller is “sigler_music” and is located in Fort Smith, Arkansas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion.

• Brand: Fender
• Type: Single Coil Set
• Model: 099-2114-000
• MPN: BOK-099-2114-000+S5W

FOR VEHICLES EQUIPPED WITH PREMIUM AMPLIFIED FACTORY SYSTEMS. INCLUDES: DASH KIT, WIRE HARNESS, AND ANTENNA ADAPTER. EVERYTHING YOU NEED BESIDES A NEW RADIO. This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. Some “SELLERS” say they will send you what is “available” at the time. They substitute cheap, poor quality generic products for the Metra Harnesses and Antenna Adapters (when applicable). Wouldn’t you rather get what you paid for? Don’t fall for cheap substitutions that come in plain plastic bags, don’t fit right and should cost a lot less. This Complete Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). DASH KIT, WIRE HARNESS, ANTENNA ADAPTER. Replaces the Entire Climate Control Panel. Retains Full Functionality of the HVAC System. Custom Design Allows Retention of Factory Air Vents in Original Locations. Removable Oversized Storage Pocket with Built-In Radio Supports. Includes Installation Parts for a Double-DIN Radio, or 2 Single-DIN Radios. Quick Release Snap-In ISO Mount System with a Custom Trim Ring. Painted to Match Factory Color and Texture. Contoured and Textured to Match the Factory Dash. Includes All Necessary Hardware for a Complete Installation. Step-By-Step Disassembly and Assembly Instructions. METRA AMP INTEGRATION WIRE HARNESS. Plugs Directly Into The Factory Harness. Fast and Easy Installation. Diversity Factory Antenna with 2-Pin Plug to Aftermarket Radio. (1) Metra 99-7604 Radio Housing. (1) ISO Trim Plate. (1) Double DIN Trim Plate. (2) Double DIN Brackets. (1) Top Radio Housing Bracket. (2) #8 x 3/8 Phillip Screws. (1) Climate Control Cable. (1) Metra Amp Integration Wire Harness. (1) Metra Antenna Adapter. Metra Amp Integration Harness. In the (48 States) Contiguous. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The free listing tool. The item “Aftermarket Double-Din Radio Install Dash Kit with Wires for G35 Car Stereo Mount” is in sale since Wednesday, October 19, 2011. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Manufacturer Part Number: Metra 99-7604 CD Player DVD D-Din Adapter Bezel
• Placement on Vehicle: Front
• Surface Finish: PAINTED TO MATCH FACTORY COLOR AND FINISH
• Warranty: Yes
• Brand: Metra 99-7604 + 70-7551 + 40-NI10
• Product Type: AFTERMARKET RADIO STEREO INSTALLATION KIT
• SUPPORTED RADIO SIZES: DOUBLE DIN, 2-DIN, ISO STACKED, ISO/SINGLE-DIN
• INTERNATIONAL BUYERS (OUTSIDE U.S.A.): PRODUCTS SOLD ARE FOR VEHICLES IN THE U.S.A. ONLY!
• COLOR: PAINTED SILVER
• Interchange Part Number: 2-Din Mounting Trim Plate & Wiring Harness
• Other Part Number: Single-Din Installation Panel & Antenna Plugs
• Country/Region of Manufacture: United States

Honda Emblem Not Included – Reuse Factory Emblem. Precision injection molded – Direct replacement bumper. Upgrade your Honda’s appearance with our JDM Style front bumper cover with fog lights and grille conversion. Our bumpers are made from durable polypropylene which retains it’s shape better when compared to polyurethane components. Comes unpainted so that you can color match it to your vehicle’s OEM paint. Fog Lights are designed with better optics to further enhance night time visibility by maximizing light output. JDM Style Front Bumper Cover -Precision Injection Molded. Impact resistant and flexible. Direct install with no modification necessary. JDM Style Fog Lamps -JDM Style replacement fog lamps with upgraded optic and lenses. Computer designed reflectors offers excellent beam control while maximizing output. Lenses made of UV treated Polycarbonate JDM Style Front Grille -Simple Bolt-on Design. Stylish Chrome / Black Finish. Front Bumper Cover – Polypropylene. Front Grille – ABS Plastic. Fog Light Lens – Polycarbonate. Front Bumper Cover – Black. Fog Lights Lens – Clear. What’s in the box. 1 x JDM Style Front Bumper Cover 1 x JDM Style Front Grille 1 x JDM Style Clear Fog Lights 1 x Wiring Harness 1 x OE Style On/Off switch. What you might need for installation. Installation hardware not included – Reuse OE Hardware. Installation Instruction Not included. We can also be reached at 626.442.0400 during normal business hour. Monday to Friday only (excluding Holidays). We are not responsible for carrier transit time. This information is provided by the carrier and excludes weekends and holidays. Designated trademarks and brands are the property of their respective owners. The item “Honda Accord 2003-2007 4DR JDM Bumper with Front grille Clear Fog Light” is in sale since Friday, November 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “advanation” and is located in Rowland Heights, California. This item can be shipped worldwide.

• Brand: ADV
• Other Part Number: 71121-SDA-A00 08V31-SDA-101 08V31-SDA-102 Wire Harness Fog Lamp
• Warranty: 90 DAY
• Interchange Part Number: 2003 04711-SDA-A90ZZ 04711-SDL-A90ZZ Foglights Grille Grill Trim
• Color: Black, Chrome
• Manufacturer Part Number: Replacement Conversion Upgrade 03 04 05 06 07 2007 2006 2005 2004
• MPN: 193800
• Material: Polypropylene, ABS Plastic
• Surface Finish: Unpainted
• Installation Instruction: Not included

Looking for the best in aesthetics, weight savings and reliability out of your harness? Our Pro Series harness completely replaces your old OEM harness so you can forget about those electrical gremlins. This Wiring Specialties PRO Series harness was designed from the ground-up to exceed OEM specifications for wire quality, power/ground routing. With our optimized and’tucked’ approach the end result will be a clean and worry free installation with a guaranteed start up. This harness is specifically engineered for a USDM LHD S13 Nissan 240sx (89-94) with the GM LS1 Cable Throttle engine swap. It was developed in house on an actual LS1 engine in an S13 240sx chassis to ensure a perfect fit to all engine connections. Wiring Specialties offers a number of options for common performance upgrades for this product. Build your perfect harness by selecting from the available options to the right, and as always – if you have any questions, please reach out to us. SUPPORTED ENGINES: Gen 3 Drive By Cable LS1/Vortec. Any LS1 from 2004 Pontiac GTO. DRIVE BY CABLE THROTTLE ONLY. CHASSIS: LHD USDM S13 240sx. Factory Speedometer use requires the DD SGi-5 Signal Conditioner Box. Factory Tachometer & Alternator Warning light remain functional. Optional Factory Gauge Sensor Adapters retain the factory Nissan Oil Pressure and Coolant Temp cluster functionality. The adapters are also machined to support most aftermarket temperature and pressure gauges that require a 1/8-27 thread pitch. Will require the use of Nissan S13/S14 Oil and Temp sensors (1-wire). PRO-SERIES HARNESS TECHNICAL SPECS. Plug and Play simple and efficient. NO CORE HARNESS or additional wiring required. OEM wire colors used, where applicable. Fireproof fiberglass sleeving used in high-temp sections near the manifold & turbo (-40°C/-40°F to +450°C/+845°F operating temperature). Point-to-Point continuity tested on every wire. Constructed using exact OEM connectors and seals. Made with high temp TXL wire with adhesive shrink tubing (-40°C/-40°F to +125°C/+257°F operating temperature). Wrapped in lightweight nylon loom (-94°C/-137°F to +125°C/+257°F operating temperature). Includes a charge harness and improved grounds. Fully tested after production for an easy plug-and-play installation. Main Engine and Transmission one-piece tucked harness. Alternator charge cable built into the main harness. Knock sensor sub-harness connector. MAFS connector (3-pin or 5-pin). Intake Air Temp connector. Bank 1 and Bank 2 Coil interface connectors (coil harnesses are optional). Oil Pressure gauge connector. Wiring for 2 PCM-controlled electric cooling fans. Bank 1 and Bank 2 FRONT Oxygen sensor connectors (High Temp shielding). 1 x Ground ring terminal. ECT sensor connector and cluster coolant temp switch connector. Reverse lights sensor connector. A/C Wiring is available as an option. Please note that adding A/C to an LS1 S13 is not easy and will require custom lines and sensor installation. Wiring Specialties will provide a wiring sub-harness needed for operating the A/C system ONLY. Printable install instructions with pictures. Turn Key ENGINE START Guarantee. FAQ & OTHER DETAILS. PCM Tachometer Adjustment – The LS1 PCM Startup Tune includes setup of the tachometer signal to work on your chassis. Signal conditioning is generally not required. Startup PCM Flash Tune – GM LS1 PCMs require basic tuning in order to run the LSx engine in a different chassis such as the 240sx, 300zx, Datsun etc. The VATS alarm or Immobilizer will prevent the engine from starting unless it is disabled. The standard base startup tune is VATS / EVAP / Rear O2 / Fuel Tank Purge removal. Most tunes leave the other parameters stock. No performance settings are changed with this startup tune – fuel map changes are NOT part of this service. Alternator Charge Cable – This item ties the starter/battery directly to the Alternator output, which allows the improved power routing on our harness to eliminate the wire running from the alternator to the fusebox and/or battery while still charging the battery normally. Grounding Kit – Our Kit ties a number if engine components to the body of the car and ensures that you will not have issues resulting from poor grounds. The Grounding Kit utilizes Ultra High temp fiberglass sleeving to allow installation under or around exhaust components. Very flexible mounting options allow you to connect the block, head, battery tray, alternator case and chassis to completely eliminate all grounding issues. Speedo Signal Conditioning – The Dakota Digital SGI-5 unit for Speed can’condition’ the signal to compensate for cross-platform swaps. If the Option exists to ADD the unit on the harness page for your swap, then you need it for proper speedo operation. Please note that some transmissions (350z, BMW ZF and S15 Silvia for example) do not have a speed sensor and will require a non-harness based solution like a GPS speedo. Plug-n-Play vs Universal – Plug-n-Play harnesses connect to your car’s underhood fuse box for power and to connectors under the dash for gauges etc. Universal harnesses do not need an underhood fusebox to connect to and the wiring for gauges and warning lights is provided as a’flying lead’ which are bare wires labeled with their function. Right Hand Drive (RHD) Conversions – If you used ALL the stock LHD chassis connectors for your RHD swap, order the LHD version of the harness. If you used ALL the clip/swap RHD chassis connectors, order the RHD version of the harness. Don’t See It? Chances are we can do it! Battery Cables / Battery Relocation – The battery must be connected to the starter, so you need a battery cable from the positive battery terminal to the starter main power lug. Typically this positive battery cable also powers up the main under hood fusebox, which runs many of the non-engine items on your car like interior lights, dash power and headlights/taillights. Please make sure you have prepared for this as each install is different. The item “Wiring Specialties Pro Engine Tranny Harness for GM LS1 Vortec into S13 240SX” is in sale since Friday, August 09, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Charging & Starting Systems\Other”. The seller is “autocat51″ and is located in West Covina, California. This item can be shipped worldwide.

• Manufacturer Part Number: WRS-PROLS1-S13
• Brand: WSP

180W 30 LED Light Bar w/ Lower Bumper Bracket, Wiring For 16-up Toyota Tacoma. Each complete kit includes (1) 30-31 180W CREE LED light bar, a pair of lower bumper grille mounting brackets, and a relay wiring harness with on/off switch. The specially designed custom mounting brackets are crafted to facilitate an easy, clear cut bolt-on installation with no modifications required. Install the high powered double row LED light bar on your 2016 or later Toyota Tacoma to achieve the ultimate flood of light for any utility purpose and a super rugged look! Kit comes with one piece extremely bright 30-31 180W CREE high powered double-row LED light bar (spot beam pattern) with a pair of black powder coated full metal constructed lower bumper grille mounting brackets and On/Off switch wiring kit. Good for the 2016-up Toyota Tacoma with a super bright output. Exclusively designed custom mounting brackets allow for an easy bolt-on installation without any drilling required. Gives your Toyota Tacoma a super rugged look that’s suitable for on and off road. Please note that you will have to remove your bumper before mounting the double-row LED light bar so that it will fit seamlessly and securely behind the bumper grille. This will also ensure you don’t scratch the LED light bar. IJDMTOY (MotoringMax) was founded in 2004 and has since become one of the largest automotive LED lighting retailers in the United States. We are located in Los Angeles, California and carry the most complete LED replacements for all cars, SUVs, and trucks. And we will do our best to assist you in resolving any issues. Your satisfaction is our utmost concern. We are not responsible for international duty or custom charge. The item “180W 30 LED Light Bar with Lower Bumper Bracket, Wiring For 16-up Toyota Tacoma” is in sale since Thursday, August 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Light Bulbs\LED Lights”. The seller is “motoringmax” and is located in El Monte, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

• Brand: iJDMTOY
• Manufacturer Part Number: 35-969
• Interchange Part Number: Relay Wire Harness Kit plus ON/OFF Switch included
• Other Part Number: Invisible Hidden Behind Lower Grille Opening Area
• Warranty: 90 Day
• Superseded Part Number: iJDM Offroad Headlight, Fog, LED Light Bar Series
• UPC: Does not apply

7.3L Powerstroke Valve Cover Gasket Kit. W/ UVC’s and Pigtails. Fits all Late 1997 – 2003 7.3L Powerstroke. This set includes (2) valve cover gaskets, (2) UVC Harnesses (these are the under valve cover harnesses that connect to the glow plugs and injectors), and (2) external pigtails. All parts are brand NEW. These parts are packaged as a set in order to repair the very common issue that occurs when poor connections at the valve cover gasket cause the connection to overheat and meltdown. Replacing only the melted connector often results in a repeat failure because the poor contact issue remains. Even a slight amount of oil leaking into the connection seems to precipitate failure due to the high voltage involved. The injectors are powered by 110 VDC. Updated design eliminates the connection inside the valve cover gasket eliminating the most common failure point. NOTE TO 1997 OWNERS: Early 1997 trucks use TWO connectors per valve cover. Later trucks only use a single connector per valve cover. This kit will ONLY fit the later trucks with ONE connectors per valve cover. NOTE: While you have the valve cover off is also a great time to replace the glow plugs. We carry premium American made glow plugs as well. Keep in mind that a partially shorted glow plug can also cause the connector meltdown issue. PLEASE READ. We value your patronage. If a delay occurs that is longer than would normally be considered commercially acceptable, we will attempt to contact you. Please take a moment to read it. Local auto parts stores will not pay your travel costs to return a part either. Applications We guarantee our parts to be as described by part number, picture, and verbiage. While we do our best, vehicle applications, however, simply cannot be guaranteed. In most cases, we do not generate application lists. It is the nature of the auto parts business that, in rare cases, a part will not be correct for a certain vehicle even though it “should” fit. This may occur because of errors on application lists, mid-year production changes, changes to the vehicle since it was built, the fact that a car was not built for the US market, etc. If a part does not fit your vehicle, this does not mean the part is not as described. If you have suggestions, please let us know – we do value your input. Problems can be solved much more readily when civility is kept intact. The item “7.3L Powerstroke Valve Cover Gasket Kit Gaskets, UVC Harnesses, Pigtails 97-03″ is in sale since Wednesday, December 28, 2011. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Gaskets\Cyl. Head & Valve Cover Gasket”. The seller is “accuratediesel” and is located in Bitely, Michigan. This item can be shipped worldwide.

• Brand: ATS
• Interchange Part Number: 97 98 99 00 01 02 03 1997 1998 1999 2000 2001 2002
• Manufacturer Part Number: F250 F350 F-250 F-350 7.3
• Other Part Number: Gasket Under valve cover wiring harnesses injector
• Warranty: Yes
• Placement on Vehicle: Left

5.0L TIVCT COYOTE ENGINE HARNESS. 2/27/12 and newer VCT solenoids BR3Z-6M280-D required. Compatible with Ford Performance Racing Parts M-6017-A504V Control Pack. Can be used as a core for stand-alone EFI installations. Used on M-6007-A50XS crate engine. The item “FORD PERFORMANCE 2011-2014 MUSTANG 5.0L COYOTE ENGINE WIRING HARNESS M-12508-M50″ is in sale since Tuesday, April 14, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “rbracingford” and is located in Salem, Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Brand: FORD PERFORMANCE
• Manufacturer Part Number: M-12508-M50
• Warranty: No
• Country/Region of Manufacture: United States
• Country of Manufacture: United States
• Part Brand: FORD PERFORMANCE
• OE Spec or Performance/Custom: OE Spec
• Fitment Type: Performance/Custom

New OEM Fog Light Lamp Complete Kit, Wiring Harness for Hyundai Genesis Coupe2013. To provide accurate products, VIN number is needed. When you place an order, please send me a message with VIN number. We treat only 100% authentic product. We try to do our best to provide good-quality products to buyers. Part Information? Part Name : Fog Light Lamp(without LED DRL) & Fog Lamp Cover Set. Compatible Car : Hyundai Genesis Coupe 2013. Position : Front Fog Lamp. Part Number : Fog Light Lamp (LH 922012M500, RH 922022M500). Fog Lamp Cover (LH 865512M300, RH 865522M300). Fog Light Lamp(2Pcs). Fog Lamp Cover(2Pcs). Fog Light Connector(2Pcs). Item Explanation? Fog Light Cover – without parking sensor holes. Fog Light Lamp (without LED DRL) – Halogan Bulb. This product works for Genesis Coupe 2013. This is not DRL product. Fog light and cover are included in this product. We guarantee 100% satisfaction for you. Due to variation of postal service in different areas, some countries may take a little longer like Brazil, Russia, Spain, Etc. The item “New OEM Fog Light Lamp Complete Kit, Wiring Harness for Hyundai Genesis Coupe2013″ is in sale since Tuesday, March 18, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Fog/Driving Lights”. The seller is “bigclothcraft” and is located in Daegu, default. This item can be shipped to United States, all countries in Europe, Canada, Australia, Mexico, Japan.

• Brand: Hyundai
• Manufacturer Part Number: 92201(2)2M500,86551(2)2M300
• Placement on Vehicle: Left;;Right;;Front
• Warranty: Yes
• Country/Region of Manufacture: Korea, Republic of
• Country of Manufacture: Korea, Republic of